Pages: [1] :: one page |
|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Aaronm100
Perkone
|
Posted - 2009.06.06 12:32:00 -
[1]
Firstly i'm going to be doing L4 missions for caldari and against mainly guristas so a good kinetic / thermal tank is needed. I've half fitted out what i want although i have no idea of what to put in the highs and my mid setup is abit messed up so i need help finishing this off. Currently i have:
[Dominix, Mission] Damage Control II 1600mm Reinforced Rolled Tungsten Plates I N-Type Thermic Hardener I N-Type Kinetic Hardener I N-Type Kinetic Hardener I Large Armor Repairer II Large Armor Repairer II
Omnidirectional Tracking Link I Omnidirectional Tracking Link I 100MN Afterburner II Phased Weapon Navigation Array Generation Extron Heavy Capacitor Booster II, Cap Booster 800
[empty high slot] [empty high slot] [empty high slot] [empty high slot] [empty high slot] [empty high slot]
Auxiliary Nano Pump I Auxiliary Nano Pump I Sentry Damage Augmentor I
Garde I x5 Hammerhead II x5 Hobgoblin II x5 Garde I x5
Any advice on what to put in the highs / mids would be great thanks.
|
Khornne
Caldari Executive Outcomes
|
Posted - 2009.06.06 12:47:00 -
[2]
Edited by: Khornne on 06/06/2009 12:50:21
Originally by: Aaronm100 Firstly i'm going to be doing L4 missions for caldari and against mainly guristas so a good kinetic / thermal tank is needed. I've half fitted out what i want although i have no idea of what to put in the highs and my mid setup is abit messed up so i need help finishing this off. Currently i have:
[Dominix, Mission] Damage Control II 1600mm Reinforced Rolled Tungsten Plates I N-Type Thermic Hardener I N-Type Kinetic Hardener I N-Type Kinetic Hardener I Large Armor Repairer II Large Armor Repairer II
Omnidirectional Tracking Link I Omnidirectional Tracking Link I 100MN Afterburner II Phased Weapon Navigation Array Generation Extron Heavy Capacitor Booster II, Cap Booster 800
[empty high slot] [empty high slot] [empty high slot] [empty high slot] [empty high slot] [empty high slot]
Auxiliary Nano Pump I Auxiliary Nano Pump I Sentry Damage Augmentor I
Garde I x5 Hammerhead II x5 Hobgoblin II x5 Garde I x5
Any advice on what to put in the highs / mids would be great thanks.
First, remvoe the plate and add another hardener. You don't need buffer as you use dual LARs.
Fill your mids with Cap Recharger II and use CCCs so you will have a cap stable tank without using cap boosters.
Train for T2 armor hardeners as well. =)
EDIT: Oh and about the highs use some guns to draw agro and tractor beams / salvagers if you feel like. Maybe use Drone Link Augumentors for more range.
-- Khornne's Teamspeak Server Service |
Von Kapiche
Minmatar
|
Posted - 2009.06.06 13:47:00 -
[3]
Edited by: Von Kapiche on 06/06/2009 13:48:30 5x350mm rails+drone link aug would seem an obvious fit for highs. You don't need dual LARs with those rigs + that amount of tank 99% of the time. T2 hardeners are a priority, and replace the plate with a hardener.
|
Faith d'Amarr
Amarr
|
Posted - 2009.06.06 14:48:00 -
[4]
Edited by: Faith d''Amarr on 06/06/2009 14:50:14 Swapping in an extra hardener or, if you have been training compensation skills, an EANM for that 1600mm armour plating looks like a reasonable idea.
For highs, a drone link (probably overkill since you don't carry warden sentries and already have 2 tracking links), a salvager/tractor if you like to actually do something during missions, and as many 350mm railguns as you can fit.
Or perhaps an E500 vampire or two if you don't want to rely entirely on your cap booster, or you could go with a full drone repair setup - you tell me. :)
EDIT: OR you could be boring and use CCCs and Cap Rechargers in your midslots so you don't have to rely on a Cap Booster at all just like so many others. :D |
Aaronm100
Perkone
|
Posted - 2009.06.06 15:15:00 -
[5]
Originally by: Faith d'Amarr Edited by: Faith d''Amarr on 06/06/2009 14:50:14 Swapping in an extra hardener or, if you have been training compensation skills, an EANM for that 1600mm armour plating looks like a reasonable idea.
For highs, a drone link (probably overkill since you don't carry warden sentries and already have 2 tracking links), a salvager/tractor if you like to actually do something during missions, and as many 350mm railguns as you can fit.
Or perhaps an E500 vampire or two if you don't want to rely entirely on your cap booster, or you could go with a full drone repair setup - you tell me. :)
EDIT: OR you could be boring and use CCCs and Cap Rechargers in your midslots so you don't have to rely on a Cap Booster at all just like so many others. :D
Will vamps work on npc's or not? I'm only asking since they only work when your cap is lower than the person your taking it off. |
Murmandamus Verminaard
Gallente
|
Posted - 2009.06.06 15:15:00 -
[6]
Edited by: Murmandamus Verminaard on 06/06/2009 15:21:33 Thats how I fit my Dominix ;)
Please visit your user settings to re-enable images.
It's fitting against Sansha-Ships. For infos what damage will come in a mission, visit this page: EVE SURVIVAL |
Faith d'Amarr
Amarr
|
Posted - 2009.06.06 15:23:00 -
[7]
Originally by: Aaronm100
Will vamps work on npc's or not? I'm only asking since they only work when your cap is lower than the person your taking it off.
Vampires work fine on NPCs, but you have to shift targets fairly regularly as you drain them dry. I am not sure whether this actually affects NPCs actions (I haven't noticed any difference there) so it is entirely possible that the operation is faked for NPCs, but you do get the energy, and that's what's important.
|
|
|
|
Pages: [1] :: one page |
First page | Previous page | Next page | Last page |