Pages: [1] :: one page |
|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |
ZapStar253
|
Posted - 2011.06.02 05:34:00 -
[1]
Well on my Factory planet, 1 of my launch pads is not showing i see the links and routing lines, but no LP. Also the 2 facilities connected to the pad are gone,,the rounting links just dead end... My Advanced Industry Facility only showing 1/2 of its icon. When I go to customs office i can see the missing Launch pad and the commodities there..but in view planet its Not there,
Also when trying to repostion extractor heads it fails to update the increase prodution figures and reverts to the lower number. whats up with that?!
|
Kris'IN'Night
|
Posted - 2011.06.02 05:56:00 -
[2]
Have same problems with surveying panel. After placing extractor heads and pushing INSTALL PROGRAM button, output/cycle per head is decreasing radically. I've noticed that already installed and running extraction programs (before patches) running properly, only new surveying is broken. I've posted this in petition yesterday and think that CCP already noticed that problems, question is how long we wait for next patch.
|
ZapStar253
|
Posted - 2011.06.02 06:03:00 -
[3]
Edited by: ZapStar253 on 02/06/2011 06:03:50 Thank you Kris..seems like others have posted issues also..good luck to you and Thanks for your input.
|
Lenthall Scorpus
|
Posted - 2011.06.02 08:27:00 -
[4]
PI is seriously broken after 1.6. When doing survey's for hot-spots putting extractors and nodes on the hot spots for say Noble metals nets 0 extraction when it's the best spot on the planet for that type. This has happened on 2 plasma planets. I have cleared cache and yes I have set time to 2 days so not being and idiot. I have deleted the old extractors and placed new ones all with the same result. The weirdest thing is that when running the nodes on Yellow or even green areas I actually do get results from the nodes
|
Nathan Summers
|
Posted - 2011.06.02 10:00:00 -
[5]
Same here... my Oceanic one showed only two extractors and all the routes. Killed yesterday one of the extractor because it only got 76 units (think it was complex organism) per cycle (with 7 extractorheads). As mentioned above, launch-pad is not shown on planet but is accessable per context menu in space. Seems all other planets function as usual...
|
Ogari Nova
|
Posted - 2011.06.02 10:32:00 -
[6]
Having the same issue with PI as you other guys, however. I found that if i moved the extractor heads around i could find hotspots by watching the "output pr hour" rising and falling. It would seem to me that the error is that there is no correlation between scan results and actual output.
I did notice that the "hotspots" i found by searching around manually related very well to the micro organisms filter, Maybe Base metals and micro organisms have switched places somwhere in the code? It could be just a coincidence though.
|
necromaniac XIII
|
Posted - 2011.06.02 10:58:00 -
[7]
im getting the same as above but, after finding the new hot spots its still half what i was getting and the whole mapp ive set out that was doing great is now a total fail..... CCP fail
|
The Bulge
|
Posted - 2011.06.02 13:03:00 -
[8]
Same issue here and also I noticed that if I move extractor heads around it shows net 0% but I will be getting 200,000m3 in 3 days. And this is around a spot thats not rich in the scanning result.
|
griggmiester
|
Posted - 2011.06.02 13:06:00 -
[9]
o/
i got same problems on my PI, some extrators are showing very low numbers on miming about 50% of all the nods,are fine, rest is screwed up,some mods give me to max 200 unit per cycle O_o on hotspots, while some green zones have much beter mining numbers than the hotspots,
dont have much problems in missing infrastucture, only 1 extrator head was missing after the patch
|
Jason Oidipous
|
Posted - 2011.06.02 14:03:00 -
[10]
Same problems, few planets don't show all structures, extractors will show low numbers but that is fixed by moving them a bit or to a different spot. Cleared cache and tried deleting the structures no luck.
|
|
Matavhe Rems
|
Posted - 2011.06.02 15:45:00 -
[11]
PI is seriously broken. 2 of my 4 planets seem okay. The other 2 are extracting about 10% of what they should. I canceled the program, moved the heads just enough to get new numbers, started and submitted it. When I looked again it's back to the old low numbers.
|
total carbs
|
Posted - 2011.06.02 18:21:00 -
[12]
Edited by: total carbs on 02/06/2011 18:21:49 Just to post on this topic. I have submitted a report to he office bug site with the following reply from them: // Hello, Thank you for submitting your bug report. We are already aware of this problem, and have added your bugreport to the existing issue in our defect tracking system. Regards // BH Toireann
|
Serenity Gemulus
|
Posted - 2011.06.03 07:30:00 -
[13]
Same here since 1.6 i cant see an Command Center on a temperate Planet anymore. Its just not visible, so i can't upgraded it or do something else.
|
ZapStar253
|
Posted - 2011.06.03 08:12:00 -
[14]
Edited by: ZapStar253 on 03/06/2011 08:13:38 Has anyone file a petition, and received any advice?ooops just read 2 posts up..OK thanks lets hope this is resolved soon. Aloha
|
zverkqqq
|
Posted - 2011.06.03 12:21:00 -
[15]
This issue was NOT FIXED with today client patch.
|
Doctor K'halid
|
Posted - 2011.06.03 15:19:00 -
[16]
1. Amounts in ECU now appear to be correct, moving the heads to hotspots give expected results. My results show this issue as fixed. 2. Periodically I've been getting the graphic issues as described by others in this thread (nodes not showing correctly, as blocks, or not showing at all). This has been going on since before the 1.6 patch. For me reloading the planet view always fixed it. Now I am seeing a graphic issue I've not seen before; of the hundreds of heads I have spread out over 12 planets on two accounts four of them show occluded; that is the graphic for the head is partially cut-off. It does not appear to harm functionality in anyway. As for the other graphic issues not seen any today.
|
ZapStar253
|
Posted - 2011.06.03 17:16:00 -
[17]
after patch I am still missing my advanced facitities connected to the still missing LP, also the high Tech factory is still only showing 1/2 of its graphic, the routes show from missing LP still dead end.
|
Bephatasis
|
Posted - 2011.06.03 19:43:00 -
[18]
Doing PI with several Chars and have all here reported problems with any of my farm! Broken extraction amounts, disappeared buildings etc etc ...
Annoying and NO COMMENTS of any kind from CCP in any of the up to now 3 "Client Updates" ...
|
stg213
|
Posted - 2011.06.03 20:09:00 -
[19]
I have the same problem on one of five planets. An extractor is missing. The extractor heads are in place, also link but not the extractor it's self.
Cannot select it thus also not delete it. As of patch #3 which I've just installed it still isn't fixed.
|
Wantobe Rich
|
Posted - 2011.06.03 23:09:00 -
[20]
there are no hot spots any more its all the same move the heads anywere and u get the same. PI is f up.
|
|
the raver
Oberon Incorporated Morsus Mihi
|
Posted - 2011.06.04 00:46:00 -
[21]
Originally by: stg213 I have the same problem on one of five planets. An extractor is missing. The extractor heads are in place, also link but not the extractor it's self.
Cannot select it thus also not delete it. As of patch #3 which I've just installed it still isn't fixed.
ditto... Frustrating.
|
Gabbie Tinks
|
Posted - 2011.06.04 01:04:00 -
[22]
http://dl.eve-files.com/media/1106/broken_extractor.jpg
Quite frustrating...very similar bug to when the screwed up the layers for character creation.
|
ZapStar253
|
Posted - 2011.06.05 17:50:00 -
[23]
Anyone with the missing facilities or 1/2 icon for facilities resolve the problem? I haven't filed a petition seeing so many others are experincing this. Thanks
|
Doromith
|
Posted - 2011.06.05 22:11:00 -
[24]
Edited by: Doromith on 05/06/2011 22:11:57 They know:
http://www.eveonline.com/ingameboard.asp?a=topic&threadID=1521141
|
ZapStar253
|
Posted - 2011.06.06 07:38:00 -
[25]
Ah..TX! appreciate the link..
|
|
|
|
Pages: [1] :: one page |
First page | Previous page | Next page | Last page |