Pages: [1] :: one page |
|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Satara Togenada
Science and Trade Institute Caldari State
0
|
Posted - 2013.06.04 17:24:00 -
[1] - Quote
That's it.
After a few months on the market with T1, i jumped to the T2 without knowing whats going on.
Heres what i did so far, please let me know if i skipped any important step or anything.
1) After a little research on the Market... bought a few T1 BPOs. 2) Move T1 BPO's to the Copy Slot on my main station 3) Starting T1 BPO's copy job (Max run on Modules will go like these: 20 Copies 300 Runs = 2 days 17 hours) 4) 2 days later, get all the T1 BPCs (Max Runs) put them on the invention slot and start to pray to get at least 1 of the 20 copies successfully made. 5) Get the T2 BPC(s) (-4-4) 6) Go the Manufacturing Slots and crank up those Slots to get the T2 module made
Did i skip any important step on the whole process? is it that simple? So far the waiting times on copies and Invention has been the worst.
|
Bud Austrene
Republic Military School Minmatar Republic
24
|
Posted - 2013.06.04 20:30:00 -
[2] - Quote
I was told that having the t1 BPO researched to optimum material was important. Yes I am an alt. I see no reason to make it easy for bullies and greifers |
Elena Thiesant
Sun Micro Systems
365
|
Posted - 2013.06.04 20:36:00 -
[3] - Quote
The research levels of the T1 BPO have no effect on the research levels of the T2 BPC, the chance of success or anything else. |
Ryelek d'Entari
The 4th Legion SQUEE.
73
|
Posted - 2013.06.04 20:37:00 -
[4] - Quote
Bud Austrene wrote:I was told that having the t1 BPO researched to optimum material was important.
You were told incorrectly, the ME/PE level of the BPO has no relevance for invention.
OP, you missed a couple steps prior to step 4:
3a) acquire the (reusable) data interface (only 1 is required) 3b) determine whether you want to invent using decryptors and meta modules 3c) acquire required datacores, and any decryptors/meta modules from (3b), which are consumed inputs to the invention process
But otherwise yes, you've mostly described the complete Invention/T2 mfg process. Using the highsec copy slots is not recommended due to the long queue time as you've observed. The BPC copying is the bottleneck in this process. For that reason, copying BPOs in lowsec and/or POS is strongly recommended. Alternately you can buy BPCs off contracts. |
Tau Cabalander
Retirement Retreat Working Stiffs
1891
|
Posted - 2013.06.04 20:41:00 -
[5] - Quote
http://wiki.eveonline.com/en/wiki/Invention http://wiki.eveuniversity.org/Invention_101 http://www.eve-wiki.net/index.php?title=Invention_Walkthrough
Also Google: eve online invention guide |
Zhilia Mann
Tide Way Out Productions
1258
|
Posted - 2013.06.04 20:48:00 -
[6] - Quote
I'd recommend at least considering buying some T2 component BPOs (and researching them if you haven't bought them already researched). You won't always want to build your own components but there are definitely times that's the best route to take. |
Victoria Sin
Center for Advanced Studies Gallente Federation
176
|
Posted - 2013.06.04 20:57:00 -
[7] - Quote
Satara Togenada wrote:That's it.
After a few months on the market with T1, i jumped to the T2 without knowing whats going on.
Heres what i did so far, please let me know if i skipped any important step or anything.
1) After a little research on the Market... bought a few T1 BPOs. 2) Move T1 BPO's to the Copy Slot on my main station 3) Starting T1 BPO's copy job (Max run on Modules will go like these: 20 Copies 300 Runs = 2 days 17 hours) 4) 2 days later, get all the T1 BPCs (Max Runs) put them on the invention slot and start to pray to get at least 1 of the 20 copies successfully made. 5) Get the T2 BPC(s) (-4-4) 6) Go the Manufacturing Slots and crank up those Slots to get the T2 module made
Did i skip any important step on the whole process? is it that simple? So far the waiting times on copies and Invention has been the worst.
Meta modules are pretty sweet, although they can be expensive. You can farm them to an extent in Level 4 missions (that's how I get around 1/5th of the ones I use), or if you search around you can buy them cheaper than market rate. They can be quite expensive.
Remember to add in the price of the data cores and meta modules in your invention cost, if you're a spreadsheet boffin, because it all comes out of the bottom line. Though if it's the difference between profit and loss, you might be better off spending your time choosing some other module to invent. |
Tarata Ichosira
State War Academy Caldari State
0
|
Posted - 2013.06.10 14:36:00 -
[8] - Quote
First week. Lots of invention, around 180 t1 copies were transformed on 80 t2 bpcs. Had to buy a few t2 bpo components to start building the modules. A few of them were buyed. Around 20 manufacturing slots were used for this process. Only back draw I had encounter so far was a few t2 components will take around 2 days to be finished. After all that, I'm expecting to make a profit of around 500m onmy first week . Is that a decent number for someone startingout on this bbusiness.
Btw, I had produced 8 differentS modules.
One more question,, at some point I had to build some 120 t2 component, and only used one manufacturing slot for it. Is that the correct way to do it? |
|
|
|
Pages: [1] :: one page |
First page | Previous page | Next page | Last page |