Pages: [1] :: one page |
|
Author |
Thread Statistics | Show CCP posts - 2 post(s) |
Anya Yuki
Federal Navy Academy Gallente Federation
0
|
Posted - 2014.09.19 20:34:00 -
[1] - Quote
Hello people,
Do you think it is possible to do level 3 missions in this Maller setup? I know it's better to have a battlecruiser for level 3's but I just want to know if this will work. If not what could I change to make it work? My only concern is that with all level 5 skills, according to EFT cap lasts 1 min 20 seconds I welcome all suggestions regarding doing level 3's in a maller
[Maller, Maller] Medium Armor Repairer II Armor Kinetic Hardener II Armor Explosive Hardener II Energized Adaptive Nano Membrane II Adaptive Nano Plating II Heat Sink II
10MN Afterburner II Stasis Webifier II Cap Recharger II
Focused Medium Beam Laser II, Imperial Navy Multifrequency M Focused Medium Beam Laser II, Imperial Navy Multifrequency M Focused Medium Beam Laser II, Imperial Navy Multifrequency M Focused Medium Beam Laser II, Imperial Navy Multifrequency M Focused Medium Beam Laser II, Imperial Navy Multifrequency M
Medium Anti-Explosive Pump I Medium Anti-Kinetic Pump I Medium Trimark Armor Pump I
|
Paranoid Loyd
1920
|
Posted - 2014.09.19 20:36:00 -
[2] - Quote
Possible yes, efficient no. "PvE in EVE is a trap to turn you into PvP content, don't confuse it for actual gameplay." Lipbite |
Absolutely Not Analt
Caldari Provisions Caldari State
147
|
Posted - 2014.09.19 20:36:00 -
[3] - Quote
IB4FB
You'll get better feedback from the Ships and Modules section of the forums. Eve is a multi player game.-áAnd you are the content. - Ralph King-Griffin Being meh at two things is not better than being great at one. - Lugh Crow-Slave
|
Ralph King-Griffin
Lords.Of.Midnight The Devil's Warrior Alliance
5013
|
Posted - 2014.09.19 20:45:00 -
[4] - Quote
Absolutely Not Analt wrote:IB4FB
You'll get better feedback from the Ships and Modules section of the forums. This^^,
here be trolls. =]I[= |
Yarda Black
Militaris Industries Northern Coalition.
430
|
Posted - 2014.09.19 20:47:00 -
[5] - Quote
First off: not a clue
Taking that into account:
- I prefer cap booster charges compared to a cap-recharger - I prefer Pulselasers - You have an active tank so I'd use a different armor rig than the trimark - Using resist rigs means less ability to tank for specific NPC's
And yeah. A battlecruiser like the Harbinger will feel more comfortable. |
WASPY69
Hard Knocks Inc.
337
|
Posted - 2014.09.19 20:47:00 -
[6] - Quote
Assuming you're training for Amarr you should get a dual rep pulse harbinger to do them. Better tank, better dps, faster completion. And when you're done with the level 3's you should rethink your EVE career, as recent studies have shown that mission running will slowly kill your soul. |
Yang Aurilen
The Mjolnir Bloc The Bloc
439
|
Posted - 2014.09.19 20:53:00 -
[7] - Quote
EDIT:
What missions are you doing anyways that warrants a kin-exp resist setup? Gursitas? Blood raiders? |
WASPY69
Hard Knocks Inc.
337
|
Posted - 2014.09.19 20:57:00 -
[8] - Quote
Yang Aurilen wrote:EDIT:
What missions are you doing anyways that warrants a kin-exp resist setup? Gursitas? Blood raiders? I'm guessing he's going for an omni resist tank |
Anya Yuki
Federal Navy Academy Gallente Federation
0
|
Posted - 2014.09.19 21:20:00 -
[9] - Quote
Yang Aurilen wrote:EDIT:
What missions are you doing anyways that warrants a kin-exp resist setup? Gursitas? Blood raiders? I was hoping to use mission specific resists, I probably should have mentioned that. |
Remiel Pollard
Shock Treatment Ministries
5390
|
Posted - 2014.09.19 21:22:00 -
[10] - Quote
Only thing I've ever fit a Maller for was PVP. That being said, I have run a few level 3s, and I preferred the Ishkur for them. GÇ£Some capsuleers claim that ECM is 'dishonorable' and 'unfair'. Jam those ones first, and kill them last.GÇ¥ - Jirai 'Fatal' Laitanen, Pithum Nullifier Training Manual c. YC104 |
|
Anya Yuki
Federal Navy Academy Gallente Federation
0
|
Posted - 2014.09.19 21:27:00 -
[11] - Quote
Paranoid Loyd wrote:Possible yes, efficient no. I think you are correct, the point of running missions is to get more isk in less time so I would rather use a ship that would get the job done.
I was just looking for a challenge since level 1's and 2's have been a no brainer so far. I really want to go into null and do missions but I don't want to get podded in the process since I don't really have that much ISK to begin with |
Zimmy Zeta
Lisa Needs Braces.
47603
|
Posted - 2014.09.19 21:36:00 -
[12] - Quote
So if you are looking for a challenge and fun, sniping the baddies away with a beam Maller could indeed be interesting. In that case you wouldn't need a huge tank, damage and range is your tank, while the Maller's resist bonus means that it basically come with a free EANM II build in, so you could drop that, too, in lieu of more dps and cap stability.
Something like this:
2x Heat Sink II Passive mission specific hardener Passive mission specific hardener Medium Armor Repairer II Capacitor Power Relay II
Cap recharger II 10 MN AB II Targeting computer II, Optimal Range script
5x Focused Medium Beam Laser II
CCC I Energy Locus Adjuster I Energy Metastasis Adjuster I
3x light Drone II to taste
Of course, the tank is weak, but it hits out to 34+ 9,8 km with IN standard or even 61+ 9,8 km with Aurora. Cap lasts 6m18s with IN Standard + everything running. But you should rarely need your armor repper, anyway- just warp out if the enemy gets too close. Efficient? No way. But maybe it will make mission running less boring. I'd like to apologize for the poor quality of the post above and sincerely hope you didn't waste your time reading it. Yes, I do feel bad about it.
|
Iain Cariaba
345
|
Posted - 2014.09.19 21:46:00 -
[13] - Quote
Anya Yuki wrote:Hello people, Do you think it is possible to do level 3 missions in this Maller setup? I know it's better to have a battlecruiser for level 3's but I just want to know if this will work. If not what could I change to make it work? My only concern is that with all level 5 skills, according to EFT cap lasts 1 min 20 seconds I welcome all suggestions regarding doing level 3's in a maller [Maller, Maller] Medium Armor Repairer II Armor Kinetic Hardener II Armor Explosive Hardener II Energized Adaptive Nano Membrane II Adaptive Nano Plating II Heat Sink II 10MN Afterburner II Stasis Webifier II Cap Recharger II Focused Medium Beam Laser II, Imperial Navy Multifrequency M Focused Medium Beam Laser II, Imperial Navy Multifrequency M Focused Medium Beam Laser II, Imperial Navy Multifrequency M Focused Medium Beam Laser II, Imperial Navy Multifrequency M Focused Medium Beam Laser II, Imperial Navy Multifrequency M Medium Anti-Explosive Pump I Medium Anti-Kinetic Pump I Medium Trimark Armor Pump I Lows: drop the EANM and nano plating, add two more heat sinks, and swap out hardeners for each mission Mids: drop the web add tracking computer with range script, keeping tracking script in hold Highs: Pulse Lasers with Scorch. Put tracking script into tracking computer if having difficulty tracking frigs, which you shouldn't Rigs: CCC and energy weapon damage rigs
If you have to do more than pulse your armor rep, you're doing it wrong, get a BC. As long as you can keep cap stable ~50% with ab on, you're good. Disclaimer: My opinion does not necessarily reflect that of my corp or alliance. My opinion is my own, and if you don't like, that is your problem. |
|
ISD Decoy
ISD Community Communications Liaisons
188
|
Posted - 2014.09.19 21:50:00 -
[14] - Quote
Moved to Ships & Modules. ISD Decoy Lieutenant Community Communication Liaisons (CCLs) Interstellar Services Department |
|
Anya Yuki
Federal Navy Academy Gallente Federation
1
|
Posted - 2014.09.19 22:10:00 -
[15] - Quote
does anyone know if the high slots on the maller were reduced from 6 to 5? |
Iain Cariaba
346
|
Posted - 2014.09.19 22:25:00 -
[16] - Quote
Anya Yuki wrote:does anyone know if the high slots on the maller were reduced from 6 to 5? No clue, don't fly Amarr ships even though I can fly all the t2 destys, cruisers, and BCs. My suggestion for fitting is based solely on my experience running missions, and how I have fit other armor tanks for them. Personally though, I wouldn't run lvl 3s in a t1 cruiser. Use a BC, HAC, faction cruiser, or Assault Frig if you want some fun flying. Disclaimer: My opinion does not necessarily reflect that of my corp or alliance. My opinion is my own, and if you don't like, that is your problem. |
elitatwo
Congregatio
308
|
Posted - 2014.09.19 22:59:00 -
[17] - Quote
Anya Yuki wrote:does anyone know if the high slots on the maller were reduced from 6 to 5?
She has five highs now.
Since you are running an active tank, I suggest you get one of those resist shift hardeners, you might be surprised how good they are. signature |
Jacob Holland
Weyland-Vulcan Industries
313
|
Posted - 2014.09.20 14:16:00 -
[18] - Quote
In terms of efficiency and challenge, while the received wisdom is certainly to move to a battlecruiser, you may want to take a look at the Arbitrator. While it is a disruption hull and therefore has fewer HP, on all levels, than the Maller (what cruiser doesn't have fewer HP than a Maller ) it's drone bonused and can be shield tanked effectively. The highslot choice is quite flexible, assaults perhaps for small stuff, heavy assaults for large, and as there is no gun bonus you're free to use whatever you want on there...
I haven't flown one since tiericide so perhaps I'm way off base - but I knew people who swore by it as an L3 boat. |
|
|
|
Pages: [1] :: one page |
First page | Previous page | Next page | Last page |