Pages: 1 2 3 4 5 [6] 7 8 :: one page |
|
Author |
Thread Statistics | Show CCP posts - 38 post(s) |
Staten Island
Bagel and Lox
46
|
Posted - 2015.11.04 01:56:15 -
[151] - Quote
Coren PheonixII wrote:Dear CCP,
First I would like to say thank you for moving some of those buttons around on the probe scanner. That is very helpful!
Second I would like to ask why can I not use the old solar system map to scan? Life was better for everyone that way! I mean now its almost useless... scanning on that map was so much better.
I also agree with everyone else here it seems. That red D-Scan bubble? for the love of god at least give me a button to turn it off! If the noobs need a visual cue I get that but the bittervets are having a hard enough time scanning on this new map without a ghost sig emanating from our current position. Also we know very well what is in our d-scan range.
This is a terribly written post, but I'm just too frustrated with the new scanning UI to focus on anything really.
Wormhole chains across New Eden are full of raging scouts.
You can use the old map - there is an opt out in the general section of the settings. Best feature of the new scanning update. |
Sgt Ocker
Kenshin. DARKNESS.
768
|
Posted - 2015.11.04 01:58:13 -
[152] - Quote
Coren PheonixII wrote:Dear CCP,
First I would like to say thank you for moving some of those buttons around on the probe scanner. That is very helpful!
Second I would like to ask why can I not use the old solar system map to scan? Life was better for everyone that way! I mean now its almost useless... scanning on that map was so much better.
I also agree with everyone else here it seems. That red D-Scan bubble? for the love of god at least give me a button to turn it off! If the noobs need a visual cue I get that but the bittervets are having a hard enough time scanning on this new map without a ghost sig emanating from our current position. Also we know very well what is in our d-scan range.
This is a terribly written post, but I'm just too frustrated with the new scanning UI to focus on anything really.
Wormhole chains across New Eden are full of raging scouts. ESC; General Settings; Try the New Probe and Directional Scanners (remove X from box). You have the old usable scanning interface back.
CCP in their wisdom decided everyone gets to try out half finished additions - By default. You have to manually opt out.
My opinions are mine.
If you don't like them or disagree with me that's OK.- - - - - -
Just don't bother Hating - I don't care
Why can't CCP see the obvious - Large dominating groups are bad for Eve.
|
Lara Divinity
Black Scorpion Nomads
118
|
Posted - 2015.11.04 02:16:27 -
[153] - Quote
[/quote] ESC; General Settings; Try the New Probe and Directional Scanners (remove X from box). You have the old usable scanning interface back.
CCP in their wisdom decided everyone gets to try out half finished additions - By default. You have to manually opt out.[/quote] this is a life saver thx for pointing this out
|
Copper Rei
Copper Corp
93
|
Posted - 2015.11.04 02:55:21 -
[154] - Quote
In summary, this new scanning patch that no one wanted to begin with, is terrible and full of undesirable items. There are more negatives than positives and therefore it should be rolled back. Later on, offer a new patch that has d-scan related items only and then only items that people actually are asking for.
Roll back and begin again. |
Hiljah
Complex Systems
17
|
Posted - 2015.11.04 02:59:31 -
[155] - Quote
Matt Faithbringer wrote:* resizing the probe diameter doesn't work half a time since it requires much more precision than old scanner * the cube for moving probe formation DOESN'T HAVE ******* FOCUS PRIORITY! good luck moving your probes when they are centered over signature (who would do that, right?). you just get tooltip for signature * Everything seems little bit less responsive * changing active side of the position cube from blue to red is just a pointless change
Hope you're not removing old scanner any time soon :/
FIX IT FIX IT FIX IT
It looks good, too bad I will never use it. Ever.
|
Masao Kurata
Perkone Caldari State
303
|
Posted - 2015.11.04 03:01:49 -
[156] - Quote
This feels very petty but I just can't get over it so...
I don't like the new PLEX icon. It looks cheap, it feels like a toy. I miss the golden license, so shiny in my hangar or redeemables and even nicer on a cargo scan or in a wreck. The "PLEX" on it is also not very readable at the smallest icon size (cargo scans and killmails).
Don't get me wrong, I'll still shoot when I see you hauling one but I'll sigh too. |
Tillblik Mangeiri
Major League Infidels Size Really Doesn't Matter
4
|
Posted - 2015.11.04 03:05:06 -
[157] - Quote
The new probe screen is a huge step backwards if you ask me. I hate it. I hate it. I hate it. Please give us back the easy to see and read interface. If you need to modify it to accommodate the new stuff fine. But the new interface is JUNK! |
FT Diomedes
The Graduates Get Off My Lawn
1892
|
Posted - 2015.11.04 03:06:53 -
[158] - Quote
This will be among the least constructive posts I have ever made: the new probe window is just awful. I do not see a single thing on which it improves. It even looks less finished than the old one. Thank you for leaving us the option to use the old one. The biggest issue is the d-scan range sphere being visible while you probe.
This is all true too:
Quote:Matt Faithbringer wrote: * resizing the probe diameter doesn't work half a time since it requires much more precision than old scanner * the cube for moving probe formation DOESN'T HAVE ******* FOCUS PRIORITY! good luck moving your probes when they are centered over signature (who would do that, right?). you just get tooltip for signature * Everything seems little bit less responsive * changing active side of the position cube from blue to red is just a pointless change
Hope you're not removing old scanner any time soon :/
I would like to try out the new d-scan tool some more, but since I have to use it along with the new probing mechanism, that is a no go.
Insanity: doing the same thing over and over again and expecting different results. So, why do I post here?
I'm stubborn.
|
Krystyn
Serenity Rising LLC
217
|
Posted - 2015.11.04 03:29:09 -
[159] - Quote
Why did you change the D-Scan window? I feel like you are like microsoft just move things around on the toolbar and call it an upgrade. |
Krystyn
Serenity Rising LLC
217
|
Posted - 2015.11.04 03:42:28 -
[160] - Quote
Ok I like the improvement on Jump Fatigue. And I really like the following changes:
Any item that is scoopable can now also be scooped to a ships fleet hangar using the right click menu. A character with a criminal flag in a high-sec system is no longer able to board/switch ships whilst in space. Kill report timestamps are now recorded with precision up to the second instead of to the minute.
Now if I can repair and repackage things inside a container that would be awesome. |
|
Copper Rei
Copper Corp
95
|
Posted - 2015.11.04 04:00:55 -
[161] - Quote
I'm curious to know who it is at CCP that is so damn determined to destroy exploration? It seems that has been an objective for some time now. I won't be logging in again until I read that this has been rolled back because the new scanning map F9 is so tedious and bloated with fancy colors and useless crap it is completely unusable to me.
|
Veris Alland
Alfa Corporation Dream Fleet
13
|
Posted - 2015.11.04 04:42:24 -
[162] - Quote
Just add hotkeys to old interface. Thats all, will be great. But no, new scaning kill all impressions. Oh, d-scan visualsation is nice. But againg, just add new d-scan on old map. Now i switch off new features and live without funny hotkeys Great job. |
Soleil Fournier
Ultimatum. The Bastion
51
|
Posted - 2015.11.04 04:46:26 -
[163] - Quote
Just logged in, decided to run a few anomalies. Open the probe scanning window and find a mess. It's really bad. The old setup was much easier to read and so much more pleasing to the eye. I am hoping for a rollback or a further update that takes us closer to where we were before.
On the positive side I freaking LOVE the new dynamic music override. Jump fatigue changes and directional scan visualization are really nice changes too. |
Kenrailae
Mind Games. Suddenly Spaceships.
530
|
Posted - 2015.11.04 04:58:18 -
[164] - Quote
Skill queue seems to be taking quite some effort to open post 11/3 patch.
The Law is a point of View
|
Awkward Pi Duolus
Pator Tech School Minmatar Republic
153
|
Posted - 2015.11.04 04:58:43 -
[165] - Quote
This...
scanning ...
interface...
is ...
TERRIBLE!!! |
poppeteer
Pator Tech School Minmatar Republic
29
|
Posted - 2015.11.04 05:20:53 -
[166] - Quote
103 volume up and downs for the track I wanted. |
Malice Redeemer
Redeemer Group
182
|
Posted - 2015.11.04 06:59:41 -
[167] - Quote
As you are messing with the probing stuff again, I want to suggest another small tweak I have suggested in the past. Remove the word Cosmic from Signatures and Anomalies, It just wastes space the name column in the probe scanner window.
I would like to chime in that I use my ship mods a lot while probing with the old full screen map, you really should add an option to allow our ship controls to show over the full screen map.
You should give us toggle box for displaying anomalies that is directly on the window, not hidden in a menu.
Same for the option to lock the map to your camera angle, there should be a way to change that much faster, it make no sense to have a menu that opens up for one option.
The map title bar options being unmovable is a major annoyance. We have so many controls and windows we are always trying to find space for, the last thing eve needs is more unmoveable controls. |
Yoski Yoski
Green Skull LLC Bad Intention
1
|
Posted - 2015.11.04 07:06:30 -
[168] - Quote
My feedback: I really like the new D-scan and Probe scanner, but the system map in fullscreen covers up all of the UI elements. |
Randoir Crendraven
The New Normal
0
|
Posted - 2015.11.04 07:47:25 -
[169] - Quote
WHY MUST U **** WITH STUFF THAT DOESNT NEED FIXING!!!!!!!!! there was absolutely nothign ******* wrong with the scan set that was in use BUT YET u have to **** with it . KEEP "FIXING" STUFF THAT DONT NEED FIXING AND I'LL FIX MY DAMN SUBSCRIPTION !!!!!!!
PLSSSSSSSSSSSSS EXCUSE MY CAPS BUT I'M NOT ******* HAPPY AT ALLL FYI!!!!!!!!!!!!!!!!!!!!!!!! |
Damaris Velazquez
Melusine Temple
1
|
Posted - 2015.11.04 08:12:50 -
[170] - Quote
Revert to green/red backgrounds on probe scanner window (anomalies/signatures). Atm those thin lines are terribly confusing.
It's very difficult to move probes when scanning - arrowed cubes are too small. |
|
Bloemkoolsaus
Viperfleet Inc. Official Winners Of Takeshi's Castle
204
|
Posted - 2015.11.04 08:37:14 -
[171] - Quote
The new probescanning.
As a wormholer, probing is my life. The new system has lots of potential and I like it in general, but needs some more tweaking. After trying it for a couple of hours yesterday, here's what I think needs some more love.
(Some of the things i've already seen posted but i'll just post them again cause they are what i've found )
- On the probe window, I prefered the colored background on the signatures instead of the colored bar at the bottom that we have now. I often get several signatures in one scan, a couple of gas sites for exemple that are close together. I don't want to scan those out to 100%, I just want to know what they are and then forget about them. Currently, it's a lot harder then it was to identify wich sigs you've got (are not red) and then ignore them.
- On the map, some signatures now have a dot AND a bubble. I found this confusing, even though its a very small dot compared to sigs you have pinned down futher. The dot suggest you have a general idea of where the sig is. The bubble means you need to scan a wider area. With both at the same time you get conflicting feedback.
- The hitboxes on the probe controls for moving and resizing are to small, they are smaller then the actual arrow and cube! Mousing over, and clicking the arrow doesn't always select the arrow. Turning off probes on the map helped, but the hitboxes were still to small for me. I had trouble grabbing them so moving and resizing probes took me longer then i'd like.
- When I select a couple of signatures from the probe window and then ignore them, the remaining signatures disappear from the map. I have to manually select all signatures in the probe window to make them appear on the map again. It would be nice if this was done automatically.
|
MuHckuu MoHaX
Celestial Auger inc.
0
|
Posted - 2015.11.04 08:42:57 -
[172] - Quote
Soleil Fournier wrote:Just logged in, decided to run a few anomalies. Open the probe scanning window and find a mess. The coloring and underlining of each site is really bad to look at. The old coloring scheme was much easier to read and so much more pleasing to the eye. I am hoping for a rollback to the old color scheme or at least some options to mess with so we can make it look the way we like... I feel the same, man!
|
Shade Millith
Jebediah Kerman's Junkyard and Spaceship Parts Co. I N F A M O U S
157
|
Posted - 2015.11.04 09:37:40 -
[173] - Quote
Click and drag on the blue sphere to resize probes is not working properly, and often flat out doesn't. Old System - https://www.youtube.com/watch?v=nkPohxMoYTI New System - https://www.youtube.com/watch?v=BQHtKE95VeE
Planet/Gate/Moon/Station icons still take preference over the icon for moving the probes. Leading to attempts to move the probes to fail. This is especially bad with the new system, because the new Planet/Gate/Moon/Station icons have a much larger hitbox than their graphic would suggest. Old System - https://www.youtube.com/watch?v=vKbZkLXPniw New System - https://www.youtube.com/watch?v=mmfh4i3hty8
When selecting a gate or planet/moon on your overview, or in space, the old system selected the object in the map as well. This let you quickly identify and orientate yourself while combat probing, and knowing where to put the probes on the map. Especially useful for quickly placing probes on where a hostile warped to. Old System - https://www.youtube.com/watch?v=xyCGElce_nw New System - https://www.youtube.com/watch?v=iEujqHHi6N0
These are three BIG issues I ran into while running prober for a gang, and caused me to take a lot longer to get probes on target than the previous probe system.
Of smaller note, it's much harder to see Red results in space, with the icon being silly small and dark. Especially amongst the red sphere of D-Scan. |
Moac Tor
Cy-Core Industries Stain Confederation
290
|
Posted - 2015.11.04 09:56:55 -
[174] - Quote
This video (along with the others that you posted) illustrate the problem perfectly. +1 to this. I said the same previously; moving probes should be very accurate and fast to be at all usable.
Moac Tor wrote:Resizing the probes keeps wanting to either bring up the context menu or drag the map for one.
MuHckuu MoHaX wrote:Soleil Fournier wrote:Just logged in, decided to run a few anomalies. Open the probe scanning window and find a mess. The coloring and underlining of each site is really bad to look at. The old coloring scheme was much easier to read and so much more pleasing to the eye. I am hoping for a rollback to the old color scheme or at least some options to mess with so we can make it look the way we like... I feel the same, man! Yes, I agree. The icons sigantures and icons on the solar system map are not good at all as I also mentioned previously.
Moac Tor wrote:...the reasons is that the scanning interface is messy. The way it displays signatures and other celestials is either not clear, too prominent, or too messy.
Modulated ECM Effects
An Alternative to Skill Trading
|
Andronitis
Dirt 'n' Glitter Habitual Chaos
13
|
Posted - 2015.11.04 10:29:38 -
[175] - Quote
Scanning
As is stands now there is too much clutter and laggyness to the new scanner. Moving and re-sizing the probes is very clunky. The visual representation of the probes in space is neat and all but by making them selectable objects just gets in the way when moving the probe cluster. It also seems that the margin for error in selecting the probe sphere in order to re-size the probes cluster is smaller. The addition of shortcuts for re-sizing is probably nice but I'd like to not have to use them as the previous method worked just fine for me for a number of years.
In short the task of moving and re-sizing probes has taken a sever hit in this latest version. Also it would be nice if your d-scan sphere/cone was not red. It gets confused as a sig. Perhaps orange or purple, a color that isn't already used in the scanner? |
Feminacious
Nominally Serious
0
|
Posted - 2015.11.04 11:14:35 -
[176] - Quote
What the heck happened with entosing nodes? All the timers are suddenly two times longer by default... IIRC this wasn't the intention of this change - the idea was that if attacker doesn't show up, nodes slowly tick towards the defender. This was meant to be something against troll sov wanding.
Now even when attackers are there immediately, nodes regenerate so fast that the timers are incredibly painful to take. Maybe I haven't been reading the discussions lately but this change isn't what it was supposed to be... |
Aiyshimin
Fistful of Finns Paisti Syndicate
563
|
Posted - 2015.11.04 11:39:22 -
[177] - Quote
Feminacious wrote:What the heck happened with entosing nodes? All the timers are suddenly two times longer by default... IIRC this wasn't the intention of this change - the idea was that if attacker doesn't show up, nodes slowly tick towards the defender. This was meant to be something against troll sov wanding.
Now even when attackers are there immediately, nodes regenerate so fast that the timers are incredibly painful to take. Maybe I haven't been reading the discussions lately but this change isn't what it was supposed to be...
It was absolutely horrible and needs to be fixed ASAP! Nobody should be able to stay docked and still put time on the nodes.
Possible fixes:
- regen starts on uncontested nodes at next downtime - defender needs to cycle once on each node to start the regen - remove it completely, this design only caters to lazy defenders
|
Sir Tristan Udan
The Scerge Foundery
0
|
Posted - 2015.11.04 12:03:28 -
[178] - Quote
Sul Glass wrote:1/ Please can d-scan transparent circle NOT be red like cosmic sigs are red?
2/ please can we have d-scan open without transparent red circle?
3/ please can all remaining cosmic sigs remain showing in probe scanner and space after one has been fully scanned (having to ctrl A now to see them again). This is retrograde.
4/ Having to click twice to launch my current formation of probes, this is retrograde too.
5/ The separate screen/solar system map is impossible, you have to chose between seeing all your windows open or having a max map screen . if you do that you can not see; ds, local overview, chat and modules in view. Its been 1/2 hour its driving me crazy
Thank you.
Sul.
One more thing I would add. Dragging the probes/box around is TOO slow. |
Pine Marten
Eight Legged Freaky Starfighters
96
|
Posted - 2015.11.04 12:15:44 -
[179] - Quote
Why have a skin for the ship, like the police comet, if its not named police comet in space? Same goes for every skin. Makes skins kind of pointless doesnt it? |
Valorius Rageway
Federal Organization for Outerspace Freedom Circle-Of-Two
4
|
Posted - 2015.11.04 12:32:57 -
[180] - Quote
Soleil Fournier wrote:Just logged in, decided to run a few anomalies. Open the probe scanning window and find a mess. The coloring and underlining of each site is really bad to look at. The old coloring scheme was much easier to read and so much more pleasing to the eye. I am hoping for a rollback to the old color scheme or at least some options to mess with so we can make it look the way we like.
This PLEASE ! Add to it : 1) The new probe scanner window is really too dark and doesn't follow the transparency settings of the other windows. 2) The new solar system map needs to minimize when we double click on the top of it like the other windows ! Give it the Pin/Minimize options too.
That's just basic considerations because I don't even test the probing part yet... But it is still very important. |
|
|
|
|
Pages: 1 2 3 4 5 [6] 7 8 :: one page |
First page | Previous page | Next page | Last page |