Pages: 1 2 3 4 5 6 7 8 9 [10] 11 12 .. 12 :: one page |
|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |
mutuu
|
Posted - 2011.03.12 21:58:00 -
[271]
Yes i changed the paths into
self.eve = blue.EVE("E:\\EVE") self.out = "C:\\Marketlogs"
greets
|
Deusquasso
Caldari Dreddit Test Alliance Please Ignore
|
Posted - 2011.03.14 04:58:00 -
[272]
Originally by: Eraggan Sadarr Merry New Year :P
@Domella: I think you need to install visual studio 2008 express to compile reverence. Try and get that from microsoft. It's free.
Cya in 2011.
I'm having the same problem as Domella, but I have MS visual studio 10 installed which has the vcvarsall.bat file in the vc folder and the manual python instal is still giving me the error that it can't find it. Any idea?
|
Deusquasso
Caldari Dreddit Test Alliance Please Ignore
|
Posted - 2011.03.14 05:15:00 -
[273]
Originally by: Deusquasso
Originally by: Eraggan Sadarr Merry New Year :P
@Domella: I think you need to install visual studio 2008 express to compile reverence. Try and get that from microsoft. It's free.
Cya in 2011.
I'm having the same problem as Domella, but I have MS visual studio 10 installed which has the vcvarsall.bat file in the vc folder and the manual python instal is still giving me the error that it can't find it. Any idea?
Ok, did some googling and found this site that says you need to have the same version of vs that python was complied in, so you need vs 2008. Downloaded and installed it, but now when i run the install script I get the below. What does any of this mean?
c:\Python27\python.exe setup.py install running install running build running build_py creating build\lib.win-amd64-2.7 creating build\lib.win-amd64-2.7\reverence copying src\blue.py -> build\lib.win-amd64-2.7\reverence copying src\cache.py -> build\lib.win-amd64-2.7\reverence copying src\config.py -> build\lib.win-amd64-2.7\reverence copying src\const.py -> build\lib.win-amd64-2.7\reverence copying src\dbutil.py -> build\lib.win-amd64-2.7\reverence copying src\embedfs.py -> build\lib.win-amd64-2.7\reverence copying src\exceptions.py -> build\lib.win-amd64-2.7\reverence copying src\objectCaching.py -> build\lib.win-amd64-2.7\reverence copying src\strings.py -> build\lib.win-amd64-2.7\reverence copying src\util.py -> build\lib.win-amd64-2.7\reverence copying src\_os.py -> build\lib.win-amd64-2.7\reverence copying src\__init__.py -> build\lib.win-amd64-2.7\reverence running build_ext building 'reverence._blue' extension Traceback (most recent call last): File "setup.py", line 63, in <module> package_data = {"reverence": ['*.txt']}, File "c:\Python27\lib\distutils\core.py", line 152, in setup dist.run_commands() File "c:\Python27\lib\distutils\dist.py", line 953, in run_commands self.run_command(cmd) File "c:\Python27\lib\distutils\dist.py", line 972, in run_command cmd_obj.run() File "c:\Python27\lib\distutils\command\install.py", line 563, in run self.run_command('build') File "c:\Python27\lib\distutils\cmd.py", line 326, in run_command self.distribution.run_command(command) File "c:\Python27\lib\distutils\dist.py", line 972, in run_command cmd_obj.run() File "c:\Python27\lib\distutils\command\build.py", line 127, in run self.run_command(cmd_name) File "c:\Python27\lib\distutils\cmd.py", line 326, in run_command self.distribution.run_command(command) File "c:\Python27\lib\distutils\dist.py", line 972, in run_command cmd_obj.run() File "c:\Python27\lib\distutils\command\build_ext.py", line 340, in run self.build_extensions() File "c:\Python27\lib\distutils\command\build_ext.py", line 449, in build_exte nsions self.build_extension(ext) File "c:\Python27\lib\distutils\command\build_ext.py", line 499, in build_exte nsion depends=ext.depends) File "c:\Python27\lib\distutils\msvc9compiler.py", line 473, in compile self.initialize() File "c:\Python27\lib\distutils\msvc9compiler.py", line 383, in initialize vc_env = query_vcvarsall(VERSION, plat_spec) File "c:\Python27\lib\distutils\msvc9compiler.py", line 299, in query_vcvarsal l raise ValueError(str(list(result.keys()))) ValueError: [u'path']
|
mutuu
|
Posted - 2011.03.14 20:15:00 -
[274]
ive reinstalled python + pywin + reverence and get another problem now.
Could not determine EVE cache folder location. Traceback (most recent call last): File "C:\autodumper\main.py", line 186, in <module> app.quit() NameError: name 'app' is not defined
hope the problem can be solved
|
Circus Bob
|
Posted - 2011.03.14 21:08:00 -
[275]
Originally by: Eraggan Sadarr Glad you like it :)
I'm sorry i haven't been able to update for incursion data yet. I have been reeeeally busy IRL.
Hi Eraggan, I know you are busy with real life, but thought I'd post some suggestions for you anyways First, I love everything about the browser window. It is exactly like Eve and is simple and easy to use. The drop down menu could use some improvement though - right now it just lists everything, which can be extremily long if you have a lot of logs. Perhaps there could be 2 drop down menus: one lets you choose either "everything" or a specific category, and then second menu contains only the items in that category. Second, and this is a bug I think: I always turn off Security and Min. Volume everytime I use EMS. When I turn them off in the left buyer's side, the option to turn them off isn't there in the right buyer's side, or visa-versa. You have to turn on the option again in the right side, and then turn it off, to get it to go off. It's a small but annoying bug. A way to "save" your custom view settings would be awesome :). Lastly, the order "expire" time is wrong. My computer is on GMT -8 (Pacific) and sometimes I see very recent orders show up as 90H + in EMS, perhaps because it's set to Eve time? idk.
Also, what are your thoughts about a program that reads the price history market logs and displays them in a similar way? I already have an autodumper for them, it's just (very)cumbersome to read them in microsoft excel. I'd be interesting in doing something like that, as that's the only thing I see missing from EMS being a one-stop-shop type of program for market needs. Did you use visual basic for EMS?
Thanks and Cheers :)
|
Circus Bob
|
Posted - 2011.03.14 21:33:00 -
[276]
Also wanted to say that if people have problems with EMS loading corrupted files from auto-dumper, just go in your logs folder and delete all the "my orders...".txts and also any files that are 0kb.
Originally by: mutuu ive reinstalled python + pywin + reverence and get another problem now.
Could not determine EVE cache folder location. Traceback (most recent call last): File "C:\autodumper\main.py", line 186, in <module> app.quit() NameError: name 'app' is not defined
hope the problem can be solved
did you install reverence for 32-bit? also, maybe try putting both python and your market logs in the same partition as Eve (E: for you ?), idk.
|
Eraggan Sadarr
Phoenix Tribe
|
Posted - 2011.03.14 22:49:00 -
[277]
@mutuu: Well i just tried setting my eve path in main.py to a non-existing path and i get your exact error. So i'm pretty sure that you have not set a correct path for EVE.
@Circus Bob: I really appreciate the input, and i will incorporate as much as i can. I'm not sure what you mean on the Min. sec and quantity filters. They apply to both columns (regions) at the same time. Maybe i misunderstand, but do you want individual filters per region? The time zone problem is a bug as you reported. Should be fixed now. Didn't notice it because i live in GMT+1, so the difference was too small :)
For now you can check out the changelog for the upcoming release:
Quote: Changelog: v1.6.0 - Fixed: Time zone error in expiry date, reported by Circus Bob. Now strictly Eve time. - Conversion: Uses the .NET 4.0 framework now. Remember to upgrade. v1.5.9 - Fixed: Path monitoring not working when changing marketlogs path. - Update: Incursion 1.1.0 data incorporated.
|
mutuu
|
Posted - 2011.03.14 23:33:00 -
[278]
Thx for the info you were right i had the wrong directory i had the directory from the eve version of my brother not mine.
It works fine now.
THX for the EVE Market Scanner and the Help
|
Circus Bob
|
Posted - 2011.03.14 23:48:00 -
[279]
Edited by: Circus Bob on 14/03/2011 23:53:27 Edited by: Circus Bob on 14/03/2011 23:52:05 Edited by: Circus Bob on 14/03/2011 23:49:36 Awesome. Thanks for the upcoming fix!
For the filter thing, let me try to describe it better... For example, I open up EMS and don't do anything except click an item, and then make it display in two different regions. It is now displaying sellers and buyers of Region 1 in the left and Region 2 in the right. Now, I right-click to disable Security on Region 1 sellers, and it goes away only in Region 1. After this, I right-click to disable Security in Region 2 sellers, but then the checkmark by Security isn't there (because it's disabled in Region 1). But luckily you can get around this by re-checking Security in Region 2, and then disabling it in Region 2 again, and then it goes away like it should. I hope this makes sense lol.
This works the same for all the other filters, too, whether adding or disabling them, and seems to only happen when viewing 2 regions. It could be a problem with me if no one else is experience it? But it's a minor inconvience, though, no biggie.
edit: Should also say that I toyed with it a little, and if you disable Security or whatever filter you want disabled in Region 1 first, before opening up Region 2, then it seems to work correctly.
|
Eraggan Sadarr
Phoenix Tribe
|
Posted - 2011.03.15 00:48:00 -
[280]
Ah i get it now. Its the context menus(i.e. the columns in each grid). And true, they were sharing the same variable and was therefore set incorrectly. This is fixed.
I will see if i can make EMS save the state for each grid on exit. Not quite full profiles, but at least it will remember your preferences on the columns. |
|
Eraggan Sadarr
Phoenix Tribe
|
Posted - 2011.03.15 10:34:00 -
[281]
Just a little update for those using autodumper and reverence with EMS.
I noticed that a new version of reverence was uploaded a few days ago, so go grab the source and just install it again as described here
|
Circus Bob
|
Posted - 2011.03.17 09:26:00 -
[282]
Thanks. Any idea when 6.0 will be available for download?
|
Eraggan Sadarr
Phoenix Tribe
|
Posted - 2011.03.18 09:23:00 -
[283]
SoonÖ
Nah, really. I having a party for my youngest son this weekend, with around 100 guests. So i'm a bit tied up, but plan to release it after the weekend.
Hope you guys can wait
|
Eraggan Sadarr
Phoenix Tribe
|
Posted - 2011.03.22 23:23:00 -
[284]
New version up...
Quote: v1.6.0 - Fixed: Context menus (i.e. columns in grid) was incorrectly sharing the same variable. Reported by Circus Bob. - Fixed: Time zone error in expiry date, it was using local time, but is now strictly Eve time. Reported by Circus Bob. - Conversion: Based on the .NET 4.0 framework now. Remember to upgrade. v1.5.9 - Fixed: Path monitoring not working when changing marketlogs path. - Update: Incursion 1.1.0 data incorporated.
|
Tamara Striker
|
Posted - 2011.03.23 02:26:00 -
[285]
Edited by: Tamara Striker on 23/03/2011 02:26:34 Thank you for the update.
Also, I big thanks for your continuing efforts and work in this app.
Striker
|
Circus Bob
|
Posted - 2011.03.23 03:49:00 -
[286]
Originally by: Tamara Striker Edited by: Tamara Striker on 23/03/2011 02:26:34 Thank you for the update.
Also, I big thanks for your continuing efforts and work in this app.
Striker
Seconded, EMS rocks.
|
Eraggan Sadarr
Phoenix Tribe
|
Posted - 2011.03.23 21:21:00 -
[287]
I'm glad you like it.
...and ISK donations are always appreciated , but not a requirement. Just keeps me developing, instead of grinding isk for funding PVP.
|
Lin Jein
Gallente Iron Hawk Enterprises
|
Posted - 2011.04.23 10:24:00 -
[288]
Is there a way to make the program compare all regions you've exported at the same time?
|
Eraggan Sadarr
Phoenix Tribe
|
Posted - 2011.04.24 23:50:00 -
[289]
Not atm, no. But it is a feature i have wanted since i started writing this tool, so it might come soonÖ
Eve Market Scanner - Marketlog comparisons |
Therios3000
|
Posted - 2011.04.25 13:10:00 -
[290]
I'm interested in using this soft I can see a huge potencial here but I'm having a hard time understanding a few things.
What is and where is main.py ? A step by step for dumb people like me would be useful
|
|
Eraggan Sadarr
Phoenix Tribe
|
Posted - 2011.04.25 19:56:00 -
[291]
Originally by: Therios3000 I'm interested in using this soft I can see a huge potencial here but I'm having a hard time understanding a few things.
What is and where is main.py ? A step by step for dumb people like me would be useful
You need to download the zip fil provided by Mazen Alane here. In this you will find the *.py files. main.py being one of them. As i told in an earlier post you need to follow the instructions there. If it's too techy, i'm sorry. but i don't have time to write a full step by step. |
ice scr3am
|
Posted - 2011.04.28 22:09:00 -
[292]
Edited by: ice scr3am on 28/04/2011 22:15:33 Hi,
Thanks Eraggan Sadarr for this tool & Mazen Alane for the script.
I have installed as per 2.7 install
Edited my eve and output location and run the main.py
Am i correct in thinking that clicking on item categories in the market interface will drop marketlogs in the output directory or have i misunderstood the usage?
Any help much appreciated.
|
Eraggan Sadarr
Phoenix Tribe
|
Posted - 2011.05.02 12:30:00 -
[293]
Am i correct in thinking that clicking on item categories in the market interface will drop marketlogs in the output directory or have i misunderstood the usage?
Not categories, you still have to click a specific item in the market browser, say "Antimatter S" for example. Then the item data is exported to your selected output folder. And if you have set EMS to point to that folder too, then EMS will update also. |
Katsunari
|
Posted - 2011.05.13 06:30:00 -
[294]
Edited by: Katsunari on 13/05/2011 06:31:48 When I try to open main.py it just closes right away... any ideas? Iam running Vista 32bit Also, all of this is kind of complicated why not just integrate it with EMS?
I've got Python27 in C:\Python27 Then I ran the reverance installer autodumper is at C:\Python27\autodumper
and I edited main.py so it reads : self.eve = blue.EVE("C:\Program Files\CCP\EVE") self.out = "C:\Users\2kwik4u\Documents\EVE\logs\Marketlogs"
Have I missed anything?
|
Eraggan Sadarr
|
Posted - 2011.05.13 20:39:00 -
[295]
Your paths should look something like this:
self.eve = blue.EVE("E:\\Games\\EVE Secondary") self.out = "E:\\Temp\\Evelogs"
notice the double backslashes.
And integrating it into EMS is not that simple. otherwise i would have done it.
|
Eraggan Sadarr
|
Posted - 2011.06.08 14:15:00 -
[296]
I have made some major changes to the code in EMS, and would like to have some beta testers before final release of version 2.0.
Features include:
- Multiple columns, now its just up to the width of your screen
- Optimized code and UI
Would anyone be interested?
|
Even So
|
Posted - 2011.06.18 11:11:00 -
[297]
Ya, I would be interested, Your tool is really easy to use, and tends to be more accurate central once I manually export.
Thanks for the tool :)
|
ian forlorn
|
Posted - 2011.06.20 18:35:00 -
[298]
hello i just downloaded this and it looks great and works well however the exporting of files is a pain is it possible as a future development could you make it fetch data form a website like www.eve-central.com i like the program i just think that that could make it so much better
|
DAMIT NAMETOSHORT
|
Posted - 2011.06.22 12:28:00 -
[299]
Doesnt seem to work after incarna (?)
------ 22-06-2011 12:42:16 --------
OS : Microsoft Windows NT 6.1.7600.0 Platform: Win32NT
----------------------------------
System.OverflowException: Vµrdien var enten for stor eller for lille til en Int32. ved System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info) ved System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider) ved MarketScanner.DataHandler.AddMarketLogEntryDataRowToTable(String CSVLine, DataTable dt, SortedList`2& slStationNames) ved MarketScanner.DataHandler.PopulateDataTableFromMarketLogDataFile(Stream strm, String sDataTableName, SortedList`2& slStationNames) ved MarketScanner.MarketLog.ToDataTable() ved MarketScanner.MarketLog.get_MarketTable() ved MarketScanner.MarketLog.ToGridView(BgPaintedDataGridView& dgvSellers, BgPaintedDataGridView& dgvBuyers, ContextMenuStrip& cmsMainSellers, ContextMenuStrip& cmsMainBuyers) ved MarketScanner.Main.cbRegionsL_SelectedIndexChanged(Object sender, EventArgs e) ved System.EventHandler.Invoke(Object sender, EventArgs e) ved System.Windows.Forms.ComboBox.OnSelectedIndexChanged(EventArgs e) ved System.Windows.Forms.ComboBox.WmReflectCommand(Message& m) ved System.Windows.Forms.ComboBox.WndProc(Message& m) ved System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
----------------------------------
|
Rakio Oramara
Caldari Caldarische Nationale Bergbaugesellschaft
|
Posted - 2011.06.22 12:44:00 -
[300]
The autodumper/Reverence method also fails with Incarna. autodumper generates marketlogs with only headers but no data, but it doesn't report any parsing errors. Is this a problem in autodumper or Reverence?
|
|
|
|
|
Pages: 1 2 3 4 5 6 7 8 9 [10] 11 12 .. 12 :: one page |
First page | Previous page | Next page | Last page |