Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30 40 50 60 70 [80] 90 .. 96 :: one page |
|
Author |
Thread Statistics | Show CCP posts - 1 post(s) |
Open Graves
Rapid Withdrawal
12
|
Posted - 2015.12.09 02:40:19 -
[2371] - Quote
Is anyone else having trouble with "STATIONS" loading since the update today? |
Zifrian
Licentia Ex Vereor Phoebe Freeport Republic
1687
|
Posted - 2015.12.09 03:04:48 -
[2372] - Quote
Updated to the Frostline DB and Images. I tried to sneak this DB update in while I'm trying to work on some other stuff to the main program so let me know if something is fishy that hasn't been reported already. RL is too busy for me right now to get my changes done so I hope the data is good to go for now until I can get the update finished.
Note, the stations error should be fixed if you go it in a previous update. Also, some data was missing in the first DB update. Please re-run the updater to get the changes.
GÇ£Any fool can criticize, condemn, and complain - and most fools do. GÇ¥ - Dale Carnegie
Maximze your Industry Potential! - Download EVE Isk per Hour!
|
Open Graves
Rapid Withdrawal
12
|
Posted - 2015.12.09 03:17:23 -
[2373] - Quote
Re-ran updates, still getting "Stations" error. Could you give me some simple instructions to work around it? |
Zifrian
Licentia Ex Vereor Phoebe Freeport Republic
1687
|
Posted - 2015.12.09 03:39:48 -
[2374] - Quote
Open Graves wrote:Re-ran updates, still getting "Stations" error. Could you give me some simple instructions to work around it? Hmm should work. You might not have the newest updater. Try deleting the LatestVersion.xml file in your install folder and restart. That should download the latest of everything.
GÇ£Any fool can criticize, condemn, and complain - and most fools do. GÇ¥ - Dale Carnegie
Maximze your Industry Potential! - Download EVE Isk per Hour!
|
Open Graves
Rapid Withdrawal
12
|
Posted - 2015.12.09 03:53:22 -
[2375] - Quote
Same error. I will try clean install. |
Zifrian
Licentia Ex Vereor Phoebe Freeport Republic
1687
|
Posted - 2015.12.09 03:56:01 -
[2376] - Quote
Open Graves wrote:Same error. I will try clean install. Nah, don't do that. Let me test something first.
GÇ£Any fool can criticize, condemn, and complain - and most fools do. GÇ¥ - Dale Carnegie
Maximze your Industry Potential! - Download EVE Isk per Hour!
|
Open Graves
Rapid Withdrawal
12
|
Posted - 2015.12.09 04:01:56 -
[2377] - Quote
I emailed it earlier. It's from the email address that starts jdh........
Source: EVE Isk per Hour Message: An error occurred creating the form. See Exception.InnerException for details. The error is: SQLite error table STATIONS has 8 columns but 6 values were supplied |
Zifrian
Licentia Ex Vereor Phoebe Freeport Republic
1687
|
Posted - 2015.12.09 04:04:28 -
[2378] - Quote
Open Graves wrote:I emailed it earlier. It's from the email address that starts jdh........
Source: EVE Isk per Hour Message: An error occurred creating the form. See Exception.InnerException for details. The error is: SQLite error table STATIONS has 8 columns but 6 values were supplied Yeah I got it to error. It's something I missed. I'll get it fixed here shortly. Thanks
GÇ£Any fool can criticize, condemn, and complain - and most fools do. GÇ¥ - Dale Carnegie
Maximze your Industry Potential! - Download EVE Isk per Hour!
|
H3llHound
Koshaku Tactical Narcotics Team
55
|
Posted - 2015.12.09 12:06:41 -
[2379] - Quote
I keep having problems updating IPH. It always throws an error at the end of the update cycle when it wants to write the images. It occurs when i run it normal or as admin. I am on Win10.
Is there a workaround maybe?
edit: Found a workaround. Running the updater as admin solved the problem |
Open Graves
Rapid Withdrawal
12
|
Posted - 2015.12.09 12:55:15 -
[2380] - Quote
Thanks for your work last night. Updated this morning and all is working great. |
|
Eric de'Locke
Rapid Withdrawal
15
|
Posted - 2015.12.09 13:08:54 -
[2381] - Quote
Hi
Is there an alternate way to download the updates as the updater keeps disconnecting my stick when downloading?
Thanks Eric |
Open Graves
Rapid Withdrawal
12
|
Posted - 2015.12.09 14:09:13 -
[2382] - Quote
I may have spoken to soon. Anyone having issues importing prices from eve-central?
I am getting this message: EVE Central Server is Unavailable The remote server returned and error: (502) Bad Gateway. Please try again later.
This is when I hit the "Import Prices" button on the "Update Prices" tab. |
Gisele Serebriakova
Norman's Meat Market
0
|
Posted - 2015.12.09 15:11:02 -
[2383] - Quote
Open Graves wrote:I may have spoken to soon. Anyone having issues importing prices from eve-central?
I am getting this message: EVE Central Server is Unavailable The remote server returned and error: (502) Bad Gateway. Please try again later.
This is when I hit the "Import Prices" button on the "Update Prices" tab.
I'm having the same problem.
I'm being informed that the eve central servers are down and it's not the program; you can check the import times on the eve central site, they're all from 9+ hours ago.
|
Open Graves
Rapid Withdrawal
12
|
Posted - 2015.12.10 15:16:30 -
[2384] - Quote
Yep, working today. |
Harukae
Pro Spectre
8
|
Posted - 2015.12.12 02:45:11 -
[2385] - Quote
Is there a way that you can add a feature to the program so that it will see what materials I already have and factor that into the cost of producing an item? |
Captain Tardbar
Deep Core Mining Inc. Caldari State
1129
|
Posted - 2015.12.12 04:10:10 -
[2386] - Quote
Is there a way to search all existing blue prints for isk per AND materials I have or materials I specfically pick?
"Entitlement" is a euphemism for "I hate the way you play and it makes me cry like a baby".
If you fantasize about being immoral it means you enjoy being immoral deep down.
Captain Tardbar: The official grumpy cat of General Discussion.
|
Andraea Sarstae
Circle of Steel Inc. Care Factor
23
|
Posted - 2015.12.12 11:01:14 -
[2387] - Quote
I'm having an issue with invention costs not being accurate for T3 destroyers.
I'm using a Small Intact Hull Section with a Process Decryptor, which, with my skills (3, 3, 5), gives me a 57.56% chance to invent.
Small Intact Hull: 67,999,999.00 Plasma Physics Datacore: 113,299.8 Mech. Engineering Datacore: 63,457.00 Process Decryptor: 482,003.03
Using the current prices loaded, I end up with this cost formula: (67,999,999.00 + (3*113,299.85) + (3*63,457.00) + 482,003.03) / .5756
= 119,896,234.50 ISK cost to invent a 20 run BPC
However, when I set everything like so for 20 runs, I get a much larger cost to invent. I'm not sure why.
https://i.imgur.com/v2wVPbr.png |
Zifrian
Licentia Ex Vereor Phoebe Freeport Republic
1687
|
Posted - 2015.12.12 13:52:44 -
[2388] - Quote
Harukae wrote:Is there a way that you can add a feature to the program so that it will see what materials I already have and factor that into the cost of producing an item? This would be difficult but I think you are asking to see when you select an item to see what you have already. You can do that now if you add it to the shopping list then update from your assets.
Captain Tardbar wrote:Is there a way to search all existing blue prints for isk per AND materials I have or materials I specifically pick?
Actually I found out how to do all materials I own it seems, but I'd rather have select few minerals because I have resources all over the galaxy and need to mine a select few minerals. If I understand your question, there is probably a way but there are so many possibilities to consider that it's not something you could do on a personal computer in a realistic amount of time.
Andraea Sarstae wrote:I'm having an issue with invention costs not being accurate for T3 destroyers. I'm using a Small Intact Hull Section with a Process Decryptor, which, with my skills (3, 3, 5), gives me a 57.56% chance to invent. Small Intact Hull: 67,999,999.00 Plasma Physics Datacore: 113,299.8 Mech. Engineering Datacore: 63,457.00 Process Decryptor: 482,003.03 Using the current prices loaded, I end up with this cost formula: (67,999,999.00 + (3*113,299.85) + (3*63,457.00) + 482,003.03) / .5756 = 119,896,234.50 ISK cost to invent a 20 run BPC However, when I set everything like so for 20 runs, I get a much larger cost to invent. I'm not sure why. https://i.imgur.com/v2wVPbr.png Thanks I'll look at it but not sure when I'll get time this weekend.
GÇ£Any fool can criticize, condemn, and complain - and most fools do. GÇ¥ - Dale Carnegie
Maximze your Industry Potential! - Download EVE Isk per Hour!
|
Mineur I
Alabel Cie
0
|
Posted - 2015.12.12 14:35:50 -
[2389] - Quote
In the blueprints tab, "Providence" doesn't appears in the drop down menu for location. Any particular reason???
|
Zifrian
Licentia Ex Vereor Phoebe Freeport Republic
1687
|
Posted - 2015.12.12 16:53:03 -
[2390] - Quote
Mineur I wrote:In the blueprints tab, "Providence" doesn't appears in the drop down menu for location. Any particular reason???
Change from Station to Outpost or POS. There are no NPC stations in Providence and there is a difference between the two in terms of production, hence the distinction in the program.
GÇ£Any fool can criticize, condemn, and complain - and most fools do. GÇ¥ - Dale Carnegie
Maximze your Industry Potential! - Download EVE Isk per Hour!
|
|
Andraea Sarstae
Circle of Steel Inc. Care Factor
23
|
Posted - 2015.12.12 22:43:33 -
[2391] - Quote
Mineur I wrote:In the blueprints tab, "Providence" doesn't appears in the drop down menu for location. Any particular reason???
I also had an issue where my data was corrupted somehow, and only one region was showing up in the drop down, with no outposts.
I did a clean reinstall, and everything is working again. |
Andraea Sarstae
Circle of Steel Inc. Care Factor
23
|
Posted - 2015.12.13 01:54:24 -
[2392] - Quote
I found and fixed the issue with T3 invention costs.
The SQL query that was intended to only get datacores was also grabbing the T3 hull sections. And then further on, there was another SQL query that added the hull section again to the materials list.
My only worry here is that there were other materials being included that are actually correct, but are now being excluded. However, they should be added explicitly outside of the datacore section.
I have never used github before, but you should have a pull request waiting for you... sorry if I broke any kind of etiquette or standards for doing this sort of thing.
Thanks for the excuse to spend the afternoon learning new things :-) |
Zifrian
Licentia Ex Vereor Phoebe Freeport Republic
1687
|
Posted - 2015.12.13 04:23:01 -
[2393] - Quote
Andraea Sarstae wrote:I found and fixed the issue with T3 invention costs.
The SQL query that was intended to only get datacores was also grabbing the T3 hull sections. And then further on, there was another SQL query that added the hull section again to the materials list.
My only worry here is that there were other materials being included that are actually correct, but are now being excluded. However, they should be added explicitly outside of the datacore section.
I have never used github before, but you should have a pull request waiting for you... sorry if I broke any kind of etiquette or standards for doing this sort of thing.
Thanks for the excuse to spend the afternoon learning new things :-) If you broke any etiquette, you already paid for it by having to read through my horrible code. No worries, thanks for looking at it. I appreciate it and will download the change when I get time.
GÇ£Any fool can criticize, condemn, and complain - and most fools do. GÇ¥ - Dale Carnegie
Maximze your Industry Potential! - Download EVE Isk per Hour!
|
Captain Tardbar
Deep Core Mining Inc. Caldari State
1129
|
Posted - 2015.12.15 20:36:10 -
[2394] - Quote
I'm liking it so far.
One request feature that would help would be the ability to import contract prices and then compare bpc production costs to see how much isk per hour can be made on making blue print copies.
But that might be a bit overly complex to do.
Either way do I just send donations to your character?
"Entitlement" is a euphemism for "I hate the way you play and it makes me cry like a baby".
If you fantasize about being immoral it means you enjoy being immoral deep down.
|
Arden Bastilla
Defiance LLC
2
|
Posted - 2015.12.16 16:52:15 -
[2395] - Quote
First off I love the program and thank you for the hard work.
Is there documentation on the features and how to use them by chance so that I don't have to ask questions here?
The issue I'm running into is that I have a shopping list with everything I need, and I have assets loaded via API (is there a way to manually add these?) but when I click 'Update with Selected Assets' I get you do not have an asset location selected. I can't for the life of me seem to find where I select the asset location....
Help is appreciated. |
Zifrian
Licentia Ex Vereor Phoebe Freeport Republic
1687
|
Posted - 2015.12.16 18:30:44 -
[2396] - Quote
Arden Bastilla wrote:First off I love the program and thank you for the hard work.
Is there documentation on the features and how to use them by chance so that I don't have to ask questions here?
The issue I'm running into is that I have a shopping list with everything I need, and I have assets loaded via API (is there a way to manually add these?) but when I click 'Update with Selected Assets' I get you do not have an asset location selected. I can't for the life of me seem to find where I select the asset location....
Help is appreciated. Hit the safe button, check the location...hit save settings. Then update with selected assets.
GÇ£Any fool can criticize, condemn, and complain - and most fools do. GÇ¥ - Dale Carnegie
Maximze your Industry Potential! - Download EVE Isk per Hour!
|
Shardani Rinah
Viziam Amarr Empire
1
|
Posted - 2015.12.17 05:03:26 -
[2397] - Quote
I just started to use the program, but it seems like whenever I try to calculate data from the "Manufacturing List", it seems like the SVR column is empty, is there some step I am missing to get the SVR value? |
Hiircine
Signal Cartel EvE-Scout Enclave
0
|
Posted - 2015.12.17 10:49:40 -
[2398] - Quote
Shardani Rinah wrote:I just started to use the program, but it seems like whenever I try to calculate data from the "Manufacturing List", it seems like the SVR column is empty, is there some step I am missing to get the SVR value?
Since some days I have the same problem, when calculating the Manufacturing List I have the popup "Unable to update all Price volume data at this time" and SVR column is empty. |
Zifrian
Licentia Ex Vereor Phoebe Freeport Republic
1688
|
Posted - 2015.12.17 13:15:28 -
[2399] - Quote
EMD's server is down and that's where I get the eve information. Not sure if it will get fixed this time. You can disable the lookup in settings if you want.
GÇ£Any fool can criticize, condemn, and complain - and most fools do. GÇ¥ - Dale Carnegie
Maximze your Industry Potential! - Download EVE Isk per Hour!
|
Arden Bastilla
Defiance LLC
2
|
Posted - 2015.12.17 16:52:37 -
[2400] - Quote
Zifrian wrote:Hit the safe button, check the location...hit save settings. Then update with selected assets.
Gah... I don't know why I didn't realize that. Thank you for the response. That was driving me crazy... |
|
|
|
|
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30 40 50 60 70 [80] 90 .. 96 :: one page |
First page | Previous page | Next page | Last page |