Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 [14] 15 16 17 18 19 20 .. 21 :: one page |
|
Author |
Thread Statistics | Show CCP posts - 1 post(s) |
Nutbolt
Avalon Project Shadow Rock Alliance
78
|
Posted - 2013.02.21 17:23:00 -
[391] - Quote
Ok I have been doing some edge case testing on the rules and stuff and came across an issue.
I have a user, who was registered, had a working API key, all lovely. Then he decides to delete the API key on the EVE API Support page (not the forums), or change the verification code, so that it is not valid on the forums any longer. He is removed from the groups etc.... (so losses forum and jabber access), however I have a Main Group Rule which states he should then be put into a SMF Primary group (this is for a wiki bridge im testing).
I have 3 main group rules:
1.) Are they in corp, if so put in corp member group 2.) Are they out of the corp, if so put in Out of corp group 3.) Is their API key invalid, if so put in Out of corp group.
I then have some additional group rules as well.
My issue is that the person with the invalid key is not being put into the Out of corp group as their main/primary group. I have a user who is out of the corp, and they have been put into this group in line with the rules, but the person with the invalid key has not.
When I run the full check, it says No API. Is this simply a bug where an invalid API key isnt being seen by the rules as an invalid key, and is being seen as No API key, so none of the rules apply?
Thanks!
|
Nutbolt
Avalon Project Shadow Rock Alliance
78
|
Posted - 2013.02.22 11:47:00 -
[392] - Quote
The API server is down while they attempt to fix it (they took it down this morning), however this has resulted in everyone losing access to the forums and Jabber. Is it easy/possible to add something so that if the server is down it doesn't run any of the rule checks until the server is back up?
|
Shin Chogan
Blueprint Haus Get Off My Lawn
12
|
Posted - 2013.02.22 17:44:00 -
[393] - Quote
Nutbolt wrote:The API server is down while they attempt to fix it (they took it down this morning), however this has resulted in everyone losing access to the forums and Jabber. Is it easy/possible to add something so that if the server is down it doesn't run any of the rule checks until the server is back up?
I've already tried ... it is supposed to skip but I guess I've missed something. |
Nutbolt
Avalon Project Shadow Rock Alliance
78
|
Posted - 2013.02.22 19:26:00 -
[394] - Quote
Yup, once the API server came back everyone got access to Jabber and the forums again, and our wiki (access based on SMF groups).
Any ideas on my previous post about users who change their verification code, or delete it on CCPs side not being added to a primary group?
|
Nutbolt
Avalon Project Shadow Rock Alliance
78
|
Posted - 2013.02.24 08:03:00 -
[395] - Quote
Our forums have finally gone live, with this mod managing our users for the forums, Jabber and our Wiki. I have made a couple of how to videos on how to register on the forums, and how to get Jabber going using Pidgin. Obviously these videos have Avalon Project written all over them, but you are welcome to link to them if you want.
Register on the forums: http://www.avalonproject.co.uk/?page_id=474
Register/Setup Jabber: http://www.avalonproject.co.uk/?page_id=485
|
ShadowandLight
Dread Phoenix Society Black Core Alliance
68
|
Posted - 2013.02.24 19:07:00 -
[396] - Quote
I am running into this error when trying to run the "reset names" command
==
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'Brien' WHERE ID_MEMBER = 30' at line 1 File: /public_html/smf/Sources/TEA.php Line: 2645
Note: It appears that your database may require an upgrade. Your forum's files are currently at version SMF 2.0.4, while your database is at version 2.0.3. The above error might possibly go away if you execute the latest version of upgrade.php.
==
SMF searches mostly say such errors are bugs, not verison errors.
Also i ran a repair on the SMF database that showed everything was ok. |
Shin Chogan
Blueprint Haus Get Off My Lawn
12
|
Posted - 2013.02.26 00:15:00 -
[397] - Quote
ShadowandLight wrote:I am running into this error when trying to run the "reset names" command
==
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'Brien' WHERE ID_MEMBER = 30' at line 1 File: /public_html/smf/Sources/TEA.php Line: 2645
Note: It appears that your database may require an upgrade. Your forum's files are currently at version SMF 2.0.4, while your database is at version 2.0.3. The above error might possibly go away if you execute the latest version of upgrade.php.
==
SMF searches mostly say such errors are bugs, not verison errors.
Also i ran a repair on the SMF database that showed everything was ok.
I've never tried this before ... ran it on my test board and it appeared to work - certainly didn't get that error. One thing I note from the line number you quite is that it would indicate you are not running the same version of TEA as I am, so what are you running ? |
Jognu
French Kiss Singularity Astromechanica Federatis
29
|
Posted - 2013.03.23 18:50:00 -
[398] - Quote
Shin Chogan wrote:Jognu wrote:I switched from postgresql to MySQL, it works great !
I have a request : could you add the ability to register an account without the need of fill the API ? I didn't tick the "Is a Valid Api required to Register?", but when I try to register I have the error : "The API needs to show All characters on the account" (the ID and the verification code are blank and I didn't click the "Get Characters" button).
Thanks ! I'll look at that soonish ... I added the check for an account type key to try prevent people having toons in red corps on the same account ... no need to make it easy for them :) I didn't even think that people would want to allow registration without an api. Hi Shin,
Any changes for this ? If it's easy to change you can just give the line to modify and I do the trick ;) EveAI developper: https://forums.eveonline.com/default.aspx?g=posts&t=21803 YamlToSQL developper: https://forums.eveonline.com/default.aspx?g=posts&t=178572 |
Erwin Krym'L
Nippon Banzai Club
0
|
Posted - 2013.03.26 10:30:00 -
[399] - Quote
I just installed the latest rev (174), but feel utterly dumb atm. When setting up the TEA Mod, i enter the api key, which has full access on the char, but all I get as response is "A Full API Key is Required for Standings"...
Any ideas on that one?!??
(key has full access, is valid, no expiry, server to get data from is setup with https protocoll)
btw. I get that message even when I enter a totally messed up serveraddress to fetch the api data from?!?? |
Troy Aihaken
MARS. Consortium Brothers of Tangra
29
|
Posted - 2013.03.26 10:37:00 -
[400] - Quote
Just some quick questions: 1. Is that API only for the forums and not being pulled for anything else. 2. What SMF version are you using? 3. Have your tried reinstalling the mod or using a fresh install of SMF then installing it again?
Just some questions that could help :) I like helping people with I.T in eve technology hit me up in game. You need a killboard, CMS or forums + plus other cool apps made by eve developers let me know we can work something out :) |
|
Erwin Krym'L
Nippon Banzai Club
0
|
Posted - 2013.03.26 10:52:00 -
[401] - Quote
Thanks so far.
1. API Key is only used for that particular forum. 2.+3. SMF 2.0.4 -- blank new install.
Turns out, i can register with another account's char without problem (avatar, name etc. loaded without issues). It's just the TEA config that somehow behaves strange and thus me not being able to bind that key to my eve char/account ... |
Shin Chogan
Blueprint Haus Get Off My Lawn
12
|
Posted - 2013.03.26 11:02:00 -
[402] - Quote
Jognu wrote:Shin Chogan wrote:Jognu wrote:I switched from postgresql to MySQL, it works great !
I have a request : could you add the ability to register an account without the need of fill the API ? I didn't tick the "Is a Valid Api required to Register?", but when I try to register I have the error : "The API needs to show All characters on the account" (the ID and the verification code are blank and I didn't click the "Get Characters" button).
Thanks ! I'll look at that soonish ... I added the check for an account type key to try prevent people having toons in red corps on the same account ... no need to make it easy for them :) I didn't even think that people would want to allow registration without an api. Hi Shin, Any changes for this ? If it's easy to change you can just give the line to modify and I do the trick ;)
There is an option on the tea settings page to choose if api keys are required for registration - it was already there ... clear this :)
Unfortunately there is also a bug with that option but I've fixed that
Version 175
This version also includes a new script to run that cleans up orphaned api keys and characters - it is in the TEA subdirectory called db_clean_up.php.
You can run this as and when you feel like it :) |
Shin Chogan
Blueprint Haus Get Off My Lawn
12
|
Posted - 2013.03.26 11:07:00 -
[403] - Quote
Erwin Krym'L wrote:I just installed the latest rev (174), but feel utterly dumb atm. When setting up the TEA Mod, i enter the api key, which has full access on the char, but all I get as response is "A Full API Key is Required for Standings"...
Any ideas on that one?!??
(key has full access, is valid, no expiry, server to get data from is setup with https protocoll)
btw. I get that message even when I enter a totally messed up serveraddress to fetch the api data from?!??
is it the bit that says all in black ? :
The API info needed here is to get Standings A Full API Key is Required for Standings
If so then the second part isn't an error just information :) |
Erwin Krym'L
Nippon Banzai Club
0
|
Posted - 2013.03.26 11:33:00 -
[404] - Quote
Exactly that message. Ok, then i misinterpreted it Thanks so far ...
Still.... i'm not able to link my admin's forum account to my eve toon.
When I enter the same API key on the profile's eve api config, I get "[ERROR] Api must be of Type Character and show ALL toons :)"
When I enter another API key, i receive: "[ERROR] Character already listed with a different api key" |
Shin Chogan
Blueprint Haus Get Off My Lawn
12
|
Posted - 2013.03.26 12:37:00 -
[405] - Quote
Erwin Krym'L wrote:Exactly that message. Ok, then i misinterpreted it Thanks so far ... Still.... i'm not able to link my admin's forum account to my eve toon. When I enter the same API key on the profile's eve api config, I get "[ERROR] Api must be of Type Character and show ALL toons :)" When I enter another API key, i receive: "[ERROR] Character already listed with a different api key" (btw. I upgraded to rev 175) --- PROBLEM SOLVED. Although i dont have the slightest idea what may have changed -- it now works.
Glad you got it working.
I've just looked at the code for all this ... looks like the switch to CAK keys wasn't quite complete for this section and then I added in the checks for duplicate chars which could be confilicting too. I can't replicate your issues on my boards BUT there are more underlying broken things here that need fixing in the longer term :( |
Erwin Krym'L
Nippon Banzai Club
0
|
Posted - 2013.03.26 17:41:00 -
[406] - Quote
I'll try again anytime soon on a "non productive environment" and report back if I'm able to reproduce it. |
Jognu
French Kiss Singularity Astromechanica Federatis
30
|
Posted - 2013.03.27 20:29:00 -
[407] - Quote
Shin Chogan wrote:Jognu wrote:Shin Chogan wrote:Jognu wrote:I switched from postgresql to MySQL, it works great !
I have a request : could you add the ability to register an account without the need of fill the API ? I didn't tick the "Is a Valid Api required to Register?", but when I try to register I have the error : "The API needs to show All characters on the account" (the ID and the verification code are blank and I didn't click the "Get Characters" button).
Thanks ! I'll look at that soonish ... I added the check for an account type key to try prevent people having toons in red corps on the same account ... no need to make it easy for them :) I didn't even think that people would want to allow registration without an api. Hi Shin, Any changes for this ? If it's easy to change you can just give the line to modify and I do the trick ;) There is an option on the tea settings page to choose if api keys are required for registration - it was already there ... clear this :) Unfortunately there is also a bug with that option but I've fixed that Version 175This version also includes a new script to run that cleans up orphaned api keys and characters - it is in the TEA subdirectory called db_clean_up.php. You can run this as and when you feel like it :) Works great, thanks ! EveAI developper: https://forums.eveonline.com/default.aspx?g=posts&t=21803 YamlToSQL developper: https://forums.eveonline.com/default.aspx?g=posts&t=178572 |
Demitrios
Di-Tron Heavy Industries Test Alliance Please Ignore
12
|
Posted - 2013.04.10 16:38:00 -
[408] - Quote
Just tried to run the DB clear up, and PHP says...
Quote:PHP Notice: Undefined variable: userid in /***/public_html/test/TEA/db_clean_up.php on line 26 PHP Notice: Undefined variable: userid in /***/public_html/test/TEA/db_clean_up.php on line 27
It also tries to kick out a webpage in a shell saying "The database value you're trying to insert does not exist: userid", which is obviously related to the PHP notice.
Any ideas?
Thanks,
Demi |
Shin Chogan
Blueprint Haus Get Off My Lawn
12
|
Posted - 2013.04.11 22:25:00 -
[409] - Quote
Demitrios wrote:Just tried to run the DB clear up, and PHP says... Quote:PHP Notice: Undefined variable: userid in /***/public_html/test/TEA/db_clean_up.php on line 26 PHP Notice: Undefined variable: userid in /***/public_html/test/TEA/db_clean_up.php on line 27
It also tries to kick out a webpage in a shell saying "The database value you're trying to insert does not exist: userid", which is obviously related to the PHP notice. Any ideas? Thanks, Demi
Hmmm ... that script shouldn't be trying to insert anything :)
when you say you tried to run it how exactly are you running it ? |
epsilonion
Epidemic. Space Immigration
19
|
Posted - 2013.04.14 16:04:00 -
[410] - Quote
Fresh install of TEA r 175.
Having a problem when trying to register a user, when entering a vailid API and clickin get characters I get the error:
Error 516 (failed gettng user information).
CEO full api was used in the settings, the old problem of https:// is correctly entered into the files.
any idea guys?
Boom you went BOOM!!
|
|
Jognu
French Kiss Singularity Astromechanica Federatis
30
|
Posted - 2013.04.15 06:50:00 -
[411] - Quote
Did you try to remove the API key and add it again ? I had a similar problem for one of my users. EveAI developper: https://forums.eveonline.com/default.aspx?g=posts&t=21803 YamlToSQL developper: https://forums.eveonline.com/default.aspx?g=posts&t=178572 |
epsilonion
Epidemic. Space Immigration
19
|
Posted - 2013.04.15 09:40:00 -
[412] - Quote
Jognu wrote:Did you try to remove the API key and add it again ? I had a similar problem for one of my users.
Tried that, when I tried to login with an alt it did it then after a while it gave me the char names..
Ha figured it out. you have to refresh the page.. bloody stupid t
Boom you went BOOM!!
|
Tahnil
Sirius Fleet
17
|
Posted - 2013.04.19 11:08:00 -
[413] - Quote
rootimus maximus wrote:Issue 1: forum profile > personalised picture > I want to use my Eve avatar. The image displays correctly, but when I save my settings it goes back to "no avatar" and doesn't disply one.
Issue 2: I can't see any Jabber options at all in the admin menu, although users can see a tab (with no options) on their profile.
TEA Version: 1.3.0 r168 SMF version: 2.0.1
Anyone able to help?
I've got a similar problem in Version: 1.3.0 r171
The thing is, while most avatars in my forum are displayed correctly (image url is CCP imageserver) some avatars are not shown at all (image url points to avatar sub-folder of my SMF installation).
Any ideas? |
epsilonion
Epidemic. Space Immigration
19
|
Posted - 2013.04.20 11:19:00 -
[414] - Quote
Tahnil wrote:rootimus maximus wrote:Issue 1: forum profile > personalised picture > I want to use my Eve avatar. The image displays correctly, but when I save my settings it goes back to "no avatar" and doesn't disply one.
Issue 2: I can't see any Jabber options at all in the admin menu, although users can see a tab (with no options) on their profile.
TEA Version: 1.3.0 r168 SMF version: 2.0.1
Anyone able to help? I've got a similar problem in Version: 1.3.0 r171 The thing is, while most avatars in my forum are displayed correctly (image url is CCP imageserver) some avatars are not shown at all (image url points to avatar sub-folder of my SMF installation). Any ideas?
I have just installed r175 with no problems Boom you went BOOM!!
|
Shin Chogan
Blueprint Haus Get Off My Lawn
12
|
Posted - 2013.04.20 13:07:00 -
[415] - Quote
epsilonion wrote:Jognu wrote:Did you try to remove the API key and add it again ? I had a similar problem for one of my users. Tried that, when I tried to login with an alt it did it then after a while it gave me the char names.. Ha figured it out. you have to refresh the page.. bloody stupid thing when you put the api info in it does not refresh and get the char names you have to press register then reenter the details, then click get chars, now it works and you can register. Any ideas as I know a few people are having this problem?
Having registered lots of accounts during various bits of testing I can honestly say I've never seen this and the only thing I've had to do is wait a bit on the api fetch to complete :). |
Shin Chogan
Blueprint Haus Get Off My Lawn
12
|
Posted - 2013.04.20 13:09:00 -
[416] - Quote
Tahnil wrote:rootimus maximus wrote:Issue 1: forum profile > personalised picture > I want to use my Eve avatar. The image displays correctly, but when I save my settings it goes back to "no avatar" and doesn't disply one.
Issue 2: I can't see any Jabber options at all in the admin menu, although users can see a tab (with no options) on their profile.
TEA Version: 1.3.0 r168 SMF version: 2.0.1
Anyone able to help? I've got a similar problem in Version: 1.3.0 r171 The thing is, while most avatars in my forum are displayed correctly (image url is CCP imageserver) some avatars are not shown at all (image url points to avatar sub-folder of my SMF installation). Any ideas?
So the Eve avatar option works but images from the avatar subfolder don't work ? Sounds like a permissions problem on that avatar folder. Check your webserver logs.
|
Tahnil
Sirius Fleet
17
|
Posted - 2013.04.23 17:48:00 -
[417] - Quote
Will do.
New problem: Several Users have been locked out. Error Log says: GÇPToons existGÇ£. A user reported the following error message: GÇP[ERROR] Character already listed with a different api keyGÇ£
Does anybody have an idea of what went wrong? |
Tahnil
Sirius Fleet
17
|
Posted - 2013.04.23 22:00:00 -
[418] - Quote
Some more information. In the error log I can find the following entry:
http://xxxxxxxxx/forum/index.php?action=profile;area=tea;sa=api;u=34 2: Invalid argument supplied for foreach() File: /var/www/eve-community/forum/Sources/TEA.php Line: 3257 |
Tahnil
Sirius Fleet
17
|
Posted - 2013.04.24 15:20:00 -
[419] - Quote
Tahnil wrote:Will do.
New problem: Several Users have been locked out. Error Log says: GÇPToons existGÇ£. A user reported the following error message: GÇP[ERROR] Character already listed with a different api keyGÇ£
Does anybody have an idea of what went wrong?
I "solved" the problem by basically emptying the characters table and running the checks again. |
Tahnil
Sirius Fleet
17
|
Posted - 2013.04.24 19:13:00 -
[420] - Quote
Dammit. I thought I solved the problem, but now, after nearly 24 hours, all (!) users have been locked out. But with a different error message:
Status:API Error (no error message) Main Matched Rule:NO API
The characters table is empty now, mysql table "smf_tea_api" shows the error message "errorid=0" "no error message". |
|
|
|
|
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 [14] 15 16 17 18 19 20 .. 21 :: one page |
First page | Previous page | Next page | Last page |