Pages: [1] :: one page |
|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |
kobrabanana
|
Posted - 2010.10.08 01:55:00 -
[1]
Ok... so I have scientific networking trained to 3. I have some blueprints in a POS lab in the lab's storage, and I'm currently sitting 2,683m from the lab, and I open up science and industry interface and check the corp blueprints tab, and I see the lab installation listed but it says "Out of range. Max access range is 2,500m".
WTF am I missing? Is this skill broken? Why can't I use my lab without being parked right beside it?
|
Arushia
Nova Labs New Eden Research.
|
Posted - 2010.10.08 02:22:00 -
[2]
In my experience, it only applies to BPs in stations.
New Eden Research, where your research gets done! |
Clown Pron
|
Posted - 2010.10.08 03:01:00 -
[3]
Move closer? You're 183m too far. It takes 1 second to click the approach button but 30 seconds to come onto the forum, login and make a post?
|
Dasola
Minmatar
|
Posted - 2010.10.08 04:48:00 -
[4]
Originally by: kobrabanana Ok... so I have scientific networking trained to 3. I have some blueprints in a POS lab in the lab's storage, and I'm currently sitting 2,683m from the lab, and I open up science and industry interface and check the corp blueprints tab, and I see the lab installation listed but it says "Out of range. Max access range is 2,500m".
WTF am I missing? Is this skill broken? Why can't I use my lab without being parked right beside it?
That skill dosent work as you think it does.
How it works is this: You have system X, where you have both POS and corporate office. Your BPO is in office hanger. This skill allows YOU to be Z number of jumps away from system X and still able to launch resrearch from corporate office remotely.
So it really dont work on pos labs directly.
You still need to be in same region as system X. Even if its just one jump away and different region, skill dosent work.
When your at POS, you actyally have to fly to lab and be close enough to lab to launch anything on site.
|
mochavay
Melt's in your Mouth Industries
|
Posted - 2010.10.08 05:54:00 -
[5]
For the scientific skill to work the bp's must be in a station not the pos and iirc it has to be a corp hangar not your personal one. Hope this helps
|
Sepi
Gamma Draconis Industries Eternus Imperium Alliance
|
Posted - 2010.10.08 07:51:00 -
[6]
Originally by: Clown Pron Move closer? You're 183m too far. It takes 1 second to click the approach button but 30 seconds to come onto the forum, login and make a post?
^^ This
the fact is your 182 too far away to open teh hanger.. nothing to do with scientific networking or any other skill ;) just simple game mechanics.
|
mochavay
Melt's in your Mouth Industries
|
Posted - 2010.10.08 09:03:00 -
[7]
Yes if he was trying to acsss the boo itself he would just have to closer. But using the science tab you just have to have the bps in a corp hangar and can do it remotely with the skill as he is asking
|
Haren Tal
|
Posted - 2010.10.08 12:02:00 -
[8]
Does this only work for BP research (time and material)? I.e., having the BPs in the corp hanger in the NPC station.
I was trying to do the same thing for production but I found I had to take the BP and materials directly to the POS. Is this the only way for production?
Thanks.
|
RaTTuS
BIG Majesta Empire
|
Posted - 2010.10.08 12:39:00 -
[9]
Originally by: Haren Tal Does this only work for BP research (time and material)? I.e., having the BPs in the corp hanger in the NPC station.
I was trying to do the same thing for production but I found I had to take the BP and materials directly to the POS. Is this the only way for production?
Thanks.
for pos production you need the materials in the POS the output will be in the POS the Blueprint can either be in the POS or in a corp hanger in a station in the same system
--
|
Quazal Atreides
Gallente Gamma Draconis Industries Eternus Imperium Alliance
|
Posted - 2010.10.08 14:25:00 -
[10]
this is true, but for building remotely you need "suppy chain management" skill
but same principle as biggus explained.. move the mats to the relevant corp hanger IN POS then the remote install can be done using a blueprint from teh corp hanger in station.
|
|
kobrabanana
|
Posted - 2010.10.08 19:23:00 -
[11]
Originally by: mochavay For the scientific skill to work the bp's must be in a station not the pos and iirc it has to be a corp hangar not your personal one. Hope this helps
This was it. It apparently just doesnt work if the prints are in the labs themselves, only of theyre in the station. Rented an office and dumped them in the station, and viola, can research remotely. Kind of dumb for it to work that way, imo, but whatever. Mission accomplished. Thanks for your replies.
|
Emporer Norton
|
Posted - 2010.10.09 01:42:00 -
[12]
Don't even need the skill just be in space and start job from a corp hanger in same sys
|
Breaker77
Gallente Reclamation Industries
|
Posted - 2010.10.09 02:23:00 -
[13]
Originally by: Emporer Norton Don't even need the skill just be in space and start job from a corp hanger in same sys
If the BPO is in a corp hangar in the same system and you are within 2500m of the lab you can start the research job without the skill. That is working as intended.
If this is working anywhere in the system then it is a bug and you should bug report it before you get banned for using exploits.
|
Haren Tal
|
Posted - 2010.10.09 08:14:00 -
[14]
Thanks for replies to my 'production' query. I have suppy chain management skill at L2 and confirm that BPs can be in corp hanger in NPC station or POS but doesn't work if BPs are in your personal hanger in NPC station. Materials have to be in POS.
|
kobrabanana
|
Posted - 2010.10.09 22:49:00 -
[15]
Originally by: Emporer Norton Don't even need the skill just be in space and start job from a corp hanger in same sys
Right, I understand that part of it, but I was trying to figure out why my scientific networking wasn't alowing me to see the prints and do the research from further away. Im not always in the same system as the pos and was trying to take advantage of the range skill, and thought if the BPs were just in the labs then we could save the cost of maintaining another corp office. Even with the skill it just doesn't see the prints at a distance unless theyre in the station though.
|
Mona X
Caldari C0VEN
|
Posted - 2010.10.09 23:22:00 -
[16]
Originally by: kobrabanana
of the range skill, and thought if the BPs were just in the labs then we could save the cost of maintaining another corp office.
They will save you cost until first wardec.
Join Eve-Online, meet interesting people, grief them. |
Breaker77
Gallente Reclamation Industries
|
Posted - 2010.10.10 00:46:00 -
[17]
Originally by: Haren Tal doesn't work if BPs are in your personal hanger in NPC station.
Thats because a POS is a corp asset, not a personal one.
|
|
|
|
Pages: [1] :: one page |
First page | Previous page | Next page | Last page |