Pages: [1] 2 3 :: one page |
|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Vehlin
Black Viper Nomads
|
Posted - 2010.12.21 11:05:00 -
[1]
Following the release of Incursion and the removing of the learning skills I am offering up the first Release Candidate for EVEMon 1.3.4. Please submit any bugs you find with the RC either in this thread or in the bug reports thread on BattleClinic.
1.3.4-RC1 Installer 1.3.4-RC1 Binaries
More details about the RC and the change notes can be found here.
The static data has been updated for Incursion 1.0.1, this data is incompatible with previous versions of EVEMon. As a result you will be prompted to download the old data by EVEMon, you may choose to do this if you wish, but you will not benefit from the additions made by CCP. This prompt will disappear following the official release of 1.3.4.
Thank you to BattleClinic for hosting EVEMon, and to all of the contributors and testers that have helped us out.
|
Kelby
Deep Core Mining Inc.
|
Posted - 2010.12.21 11:22:00 -
[2]
Edited by: Kelby on 21/12/2010 11:22:11 Thanks! Will give it a try.
|
Megatfx
|
Posted - 2010.12.21 11:39:00 -
[3]
Edited by: Megatfx on 21/12/2010 11:40:03 Thanks using it now.
I had one issue, when I installed the new EveMon over the old one, then restarted after installing .NET 4, EveMon would not work, kept crashing and when I tried to uninstall it said "Please close out Evemon before continuing" even though it was not running. Tried restarting, then uninstalling Evemon without attempting to launch it and got the same error.
Had to manually delete the Evemon folder, then re-install to get it to work.
|
Manipulator General
o.0
|
Posted - 2010.12.21 12:31:00 -
[4]
Previous to installing this Evemon would crash for me (which was fine, since I new an update was incoming).
Now it doesn't crash, however the Ore Indy skill isn't there. Is it there for anyone else? I didn't bother deleting the previous installation, but will if it's required.
Thanks for the update, man.
|
Desmont McCallock
|
Posted - 2010.12.21 12:33:00 -
[5]
Because EVEMon from now on (> 1.3.4) will require .NET Framework 4 to run, before you overwrite the files in the EVEMon installation folder or re-install it, you need to have .NET 4 installed first.
On behalf of The EVEMon Dev Team
|
Desmont McCallock
|
Posted - 2010.12.21 12:36:00 -
[6]
If you overwrite the EVEMon files in your EVEMon installation folder, in order to make the new data files to kick in, you have to delete the previous ones (located in %APPDATA%\EVEMon folder). Beware, ones you do that you will not be able to use a previous version of EVEMon.
On behalf of The EVEMon Dev Team
|
Kithran
|
Posted - 2010.12.21 12:38:00 -
[7]
Few quick notes/issues (don't have a login for battleclinc so posting here rather than in evemon forums)
The message box displayed during install saying you need to install .net4 has \n on second and subsequent lines.
The ORE Industrial Skill isn't displayed on character sheet
Count of known skills is incorrect on character sheet (1 short, presumeably due to ORE industrial)
The ORE Industrial Skill isn't displayed in the skill browser
The Noctis isn't displayed in the ship browser
The Noctis BPO isn't displayed in the item browser
The Noctis BPO isn't displayed in the item browser
I received no message prompting me to download old data. I tried reinstalling the release candiate again and this fixed none of the above issues (except I didn't get the .net message as it had been installed during the first install).
Cheers
Kithran
|
Desmont McCallock
|
Posted - 2010.12.21 12:43:00 -
[8]
See the above post.
|
Vehlin
Black Viper Nomads
|
Posted - 2010.12.21 12:54:00 -
[9]
In your EVEMon folder in Program Files (or Program Files(x86)) you will find a Resources folder. In that folder are a number of xml.gz files, these represent the EVE static data.
For Vista/W7 copy these files to "c:\users\<username>\App Data\Roaming\EVEMon\"
As pointed out you can also find this folder using "%AppData%\EVEMon"
After that you will start seeing the message about updating your files. Apologies for having to do the data update this way, but we can't publish using our usual method because the new static data will break the current release of EVEMon.
|
Manipulator General
o.0
|
Posted - 2010.12.21 13:30:00 -
[10]
Ok, a little update for those having issues. I got mine running by doing the above.
1. Uninstall 2. Delete any remaining files in Evemon folder. 3. Delete everything in %appdata%Evemon folder. 4. Install new version.
Voila, it works. Ore skill in place.
When I installed it, it suggested updating some files, but I chose "remind me later". It seems to work fine without them. The files were dated from July, so I was hesitant. If I have issues, maybe I'll do that.
Thanks again.
|
|
Desmont McCallock
|
Posted - 2010.12.21 13:40:00 -
[11]
Originally by: Manipulator General Ok, a little update for those having issues. I got mine running by doing the above.
1. Uninstall 2. Delete any remaining files in Evemon folder. 3. Delete everything in %appdata%Evemon folder. 4. Install new version.
Voila, it works. Ore skill in place.
When I installed it, it suggested updating some files, but I chose "remind me later". It seems to work fine without them. The files were dated from July, so I was hesitant. If I have issues, maybe I'll do that.
Thanks again.
You where prompt to dl the Tyrannis data files as those are still EVEMon's official data files. While running EVEMon 1.3.4-RC1 those data files are not needed and therefore need to be ignored.
On behalf of The EVEMon Dev Team
|
Rosalina Sarinna
Royal Guardsmen
|
Posted - 2010.12.21 14:39:00 -
[12]
Originally by: Vehlin In your EVEMon folder in Program Files (or Program Files(x86)) you will find a Resources folder. In that folder are a number of xml.gz files, these represent the EVE static data.
For Vista/W7 copy these files to "c:\users\<username>\App Data\Roaming\EVEMon\"
As pointed out you can also find this folder using "%AppData%\EVEMon"
After that you will start seeing the message about updating your files. Apologies for having to do the data update this way, but we can't publish using our usual method because the new static data will break the current release of EVEMon.
Thankyou for this clarification, the program now shows up ORE Industrial, and ofc the attrib changes without any problem that I can see. Nice work guys; you're all awesome
|
Daphne Eveningstar
|
Posted - 2010.12.21 21:00:00 -
[13]
.NET framework 4 download
|
Conor Todaki
ASTER MINER
|
Posted - 2010.12.21 21:17:00 -
[14]
My training timer says 3280 days when it's a level 3 skill. I've cleared all settings and re-entered my API and it's still like that.
|
Vehlin
Black Viper Nomads
|
Posted - 2010.12.21 23:54:00 -
[15]
Originally by: Conor Todaki My training timer says 3280 days when it's a level 3 skill. I've cleared all settings and re-entered my API and it's still like that.
Give it an hour or so (which you probably have by now) to ensure that it's not an API Caching issue. If it's still causing problems then post again and we'll look into what could be causing the issue.
|
Conor Todaki
ASTER MINER
|
Posted - 2010.12.22 12:34:00 -
[16]
Originally by: Vehlin
Originally by: Conor Todaki My training timer says 3280 days when it's a level 3 skill. I've cleared all settings and re-entered my API and it's still like that.
Give it an hour or so (which you probably have by now) to ensure that it's not an API Caching issue. If it's still causing problems then post again and we'll look into what could be causing the issue.
Ok that level 3 skill finished and now it's on a level 4. It still says 3280 days which i assume now is your client's limit or something. Also the little bar that says how much percentage is done stays on 0% done for some reason.
Pic: http://i51.tinypic.com/21o0wuh.png Sorry so much is blacked out. I just needed to show you the 0% done bit aswell.
|
Desmont McCallock
|
Posted - 2010.12.22 15:47:00 -
[17]
Edited by: Desmont McCallock on 22/12/2010 15:47:50 Which version are you using? If you are using RC1, which way did you installed it. Installer or binaries? Did you previously un-installed the old EVEMon or just overwrote the files in the installation folder? Did you cleared (deleted) the data files from your %APPDATA%\EVEMon folder?
On behalf of The EVEMon Dev Team
|
Deep Trip
|
Posted - 2010.12.22 17:48:00 -
[18]
I can't seem to find a folder named '%APPDATA%\EVEMon' I tried the search function but it only turns up the evemon folder.
|
Conor Todaki
ASTER MINER
|
Posted - 2010.12.22 18:23:00 -
[19]
Originally by: Desmont McCallock Edited by: Desmont McCallock on 22/12/2010 15:47:50 Which version are you using? If you are using RC1, which way did you installed it. Installer or binaries? Did you previously un-installed the old EVEMon or just overwrote the files in the installation folder? Did you cleared (deleted) the data files from your %APPDATA%\EVEMon folder?
On behalf of The EVEMon Dev Team
Yep after the update I un-installed and then re-installed the client using the installer link in the OP(Not the binaries). I've just cleared the data from the appdata folder and restarted and updated everything and it's still not working.
|
Desmont McCallock
|
Posted - 2010.12.22 18:40:00 -
[20]
Edited by: Desmont McCallock on 22/12/2010 18:41:55 If it's not much to ask, can you backup your settings file, reset the settings file and re-add that character alone on a fresh setting. Just curious to see if it's something in your settings file or the data that CCP is sending.
Originally by: Deep Trip I can't seem to find a folder named '%APPDATA%\EVEMon' I tried the search function but it only turns up the evemon folder.
If you type it, in the address bar in any window explorer, it will get automatically there.
On behalf of The EVEMon Dev Team
|
|
Fredou
Gallente Hidden Agenda Deep Space Engineering
|
Posted - 2010.12.22 22:22:00 -
[21]
I would ask, if it's possible, to remove the need of framework 4
main reason is that under linux, wine doesn't like / work with that framework
---
I need escrow back. |
Deep Trip
|
Posted - 2010.12.22 23:56:00 -
[22]
Originally by: Desmont McCallock Edited by: Desmont McCallock on 22/12/2010 18:41:55 If it's not much to ask, can you backup your settings file, reset the settings file and re-add that character alone on a fresh setting. Just curious to see if it's something in your settings file or the data that CCP is sending.
Originally by: Deep Trip I can't seem to find a folder named '%APPDATA%\EVEMon' I tried the search function but it only turns up the evemon folder.
If you type it, in the address bar in any window explorer, it will get automatically there.
On behalf of The EVEMon Dev Team
I have deleted that folder before, did it again and reentered the api keys and still missing the ore skill.
|
Chesty McJubblies
Gallente Center for Advanced Studies
|
Posted - 2010.12.23 00:46:00 -
[23]
Originally by: Conor Todaki My training timer says 3280 days when it's a level 3 skill.
Maybe your attributes are really bad.
|
Desmont McCallock
|
Posted - 2010.12.23 06:11:00 -
[24]
Edited by: Desmont McCallock on 23/12/2010 06:13:30
Originally by: Deep Trip
Originally by: Desmont McCallock Edited by: Desmont McCallock on 22/12/2010 18:41:55 If it's not much to ask, can you backup your settings file, reset the settings file and re-add that character alone on a fresh setting. Just curious to see if it's something in your settings file or the data that CCP is sending.
Originally by: Deep Trip I can't seem to find a folder named '%APPDATA%\EVEMon' I tried the search function but it only turns up the evemon folder.
If you type it, in the address bar in any window explorer, it will get automatically there.
On behalf of The EVEMon Dev Team
I have deleted that folder before, did it again and reentered the api keys and still missing the ore skill.
Then you are not using the RC1 version.
Edit: I don't want you to delete the installation folder but the folder where the data files are (and they are not in the same folder).
On behalf of The EVEMon Dev Team
|
Desmont McCallock
|
Posted - 2010.12.23 07:46:00 -
[25]
Originally by: Conor Todaki
Originally by: Desmont McCallock Edited by: Desmont McCallock on 22/12/2010 15:47:50 Which version are you using? If you are using RC1, which way did you installed it. Installer or binaries? Did you previously un-installed the old EVEMon or just overwrote the files in the installation folder? Did you cleared (deleted) the data files from your %APPDATA%\EVEMon folder?
On behalf of The EVEMon Dev Team
Yep after the update I un-installed and then re-installed the client using the installer link in the OP(Not the binaries). I've just cleared the data from the appdata folder and restarted and updated everything and it's still not working.
I was looking into your issue, checking and re-checking the code. There is nothing wrong with EVEMon as far as I can tell. After all if it was a bug it would have been reported by other users too. Two things come in mind that can cause what you are experiencing. 1. Your system clock. 2. You are training a non-public skill.
Your screenshot doesn't give me much to work on. Contact me via EVEMail, if you are willing to send me your settings file, so I can investigate it first hand.
On behalf of The EVEMon Dev Team
|
Chesty McJubblies
Gallente Center for Advanced Studies
|
Posted - 2010.12.23 13:28:00 -
[26]
Hey,
I keep getting the Tyrannis update window popping up. Is there a way to stop this? Or is it safe to let it update?
Thanks.
|
Desmont McCallock
|
Posted - 2010.12.23 14:06:00 -
[27]
Originally by: Chesty McJubblies Hey,
I keep getting the Tyrannis update window popping up. Is there a way to stop this? Or is it safe to let it update?
Thanks.
DO NOT let it update or you will loose the Incursion changes (changes to ships, modules, plus you get an empty skill group of learning skills).
You can disable it from Tools>Options>Updates by unchecking the auto-update. Be sure to remember to check it again ones the official 1.3.4 is released.
On behalf of The EVEMon Dev Team
|
Chesty McJubblies
Gallente Center for Advanced Studies
|
Posted - 2010.12.23 14:25:00 -
[28]
Sweet, thanks.
|
Deep Trip
|
Posted - 2010.12.23 18:40:00 -
[29]
Ah hell, it was the tyrannis update that was messing things up on me, thanks for pointing that out.
|
Miranda Chambers
Hedion University
|
Posted - 2010.12.23 22:09:00 -
[30]
Seems i cant use this one then, Net framework 4 takes 4 gbs too install, and my Windows Disk has only 1.7g free, Hooray for bad Hardrives >_>
|
|
|
|
|
Pages: [1] 2 3 :: one page |
First page | Previous page | Next page | Last page |