Pages: [1] :: one page |
|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |
SeaShadow
|
Posted - 2011.03.09 20:41:00 -
[1]
There has been growing interest in 3D printers, and I have seen more and more threads about using them for EVE related material. I thought I might as well start a general EVE modeling thread where we can show off our prints and productions. If you have a thread about your work posted elsewhere just let me know and I will add the URL to the directory.
|
SeaShadow
|
Posted - 2011.03.09 20:43:00 -
[2]
Directory of models
(Reserved for future use)
PS I will be posting one of my models in a few minutes.
|
SeaShadow
|
Posted - 2011.03.09 20:48:00 -
[3]
Edited by: SeaShadow on 09/03/2011 20:55:43 Edited by: SeaShadow on 09/03/2011 20:52:03 Last night I finished dialing in some new settings for my RepRap 3D printer. Before I went to bed I started a print job I had been wanting to print for some time. I awoke this morning to find this waiting for me.
*notice to dev* I am making thumbnails right now and will redo the images shortly
After breaking away the support material I was left with this.
Eventually I hope to get around to sanding and painting it for a nice finish. It has a wingspan of just under 6.5 in (16.51 cm). Additional images can be found here
|
mkmin
|
Posted - 2011.03.09 20:55:00 -
[4]
Pretty cool. A dev should be along shortly to turn those images into links though.
I've never used 3D printers so don't know the ins and outs, but with the surface texture of the model, it would be awesome to see it smoothed out/polished and painted.
|
Barakkus
|
Posted - 2011.03.09 21:03:00 -
[5]
Originally by: mkmin Pretty cool. A dev should be along shortly to turn those images into links though.
I've never used 3D printers so don't know the ins and outs, but with the surface texture of the model, it would be awesome to see it smoothed out/polished and painted.
This is basically how it works: http://www.youtube.com/watch?v=LBzyZSVK_Gs - - [SERVICE] Corp Standings For POS anchoring
|
mkmin
|
Posted - 2011.03.09 21:12:00 -
[6]
Originally by: Barakkus
Originally by: mkmin Pretty cool. A dev should be along shortly to turn those images into links though.
I've never used 3D printers so don't know the ins and outs, but with the surface texture of the model, it would be awesome to see it smoothed out/polished and painted.
This is basically how it works: http://www.youtube.com/watch?v=LBzyZSVK_Gs
I'm familiar with the process. I've been keeping an eye on it since early consumer prototypes several years ago. Just wasn't sure what kind of resolution you can get, or how easy it would be to smooth out the surface, maybe with sandpaper or a file.
|
SeaShadow
|
Posted - 2011.03.10 17:57:00 -
[7]
Originally by: mkmin I'm familiar with the process. I've been keeping an eye on it since early consumer prototypes several years ago. Just wasn't sure what kind of resolution you can get, or how easy it would be to smooth out the surface, maybe with sandpaper or a file.
It really depends on the type of rapid prototyping you use. Some systems claim a vertical resolution of a single digit microns. I use an extrusion based printer and so far I have successfully achieved a vertical layer resolution of .3mm; with a little tweaking I believe I could achieve a layer resolution of .25mm I have a friend who has achieved .08mm on his printer, but it takes so long to print anything that it really isn't worth the hassle.
As far as finish work goes, it really depends on your print material. I use PLA and ABS in my printer. PLA is great for rigid parts, but is a pain to try to sand or shape after its printed it just scuffs up for me. ABS on the other hand is easy to shape and sand. With a little work, you can create a relatively smooth finish.
In either case a little bondo will work wonders.
|
Lev Abaddon
|
Posted - 2011.03.14 16:17:00 -
[8]
I'm a student product design, and lately I've been given the task to figure out our new 3D printer. Basically i can go up to 0.10 mm in resolution and print 390.000 possible colours. A possible option is to infuse the models with a hardener, so it will be stronger, and the colours will pop out more.
Seeing as some people would commit crimes to acquire certain spaceship models, i could look into actually printing one. If it is possible to import the ships as a 3D model, it will be fairly certain i can acquire a full printed model within a few days. If i have to draw it, it's going to be quite a painfull task.
How many people would invest in such actions? I can get something going if there is enough interest.
Just tossing ideas here.
A quick example of the capabilities of our printer.
|
shady trader
|
Posted - 2011.03.14 16:23:00 -
[9]
Originally by: Lev Abaddon I'm a student product design, and lately I've been given the task to figure out our new 3D printer. Basically i can go up to 0.10 mm in resolution and print 390.000 possible colours. A possible option is to infuse the models with a hardener, so it will be stronger, and the colours will pop out more.
Seeing as some people would commit crimes to acquire certain spaceship models, i could look into actually printing one. If it is possible to import the ships as a 3D model, it will be fairly certain i can acquire a full printed model within a few days. If i have to draw it, it's going to be quite a painfull task.
How many people would invest in such actions? I can get something going if there is enough interest.
Just tossing ideas here.
A quick example of the capabilities of our printer.
Check the knowledge section of the forum, there should be instructions to export all the in game models.
But Be aware CCP owns the copy right and will only let you use them for personal us. Any exchange of money etc is forbidden.
If you search on eve-search for printer, there was a resent thread with a dev post confirming that you cannot exchange money (or other tokens that have monetary value including isk)for eve Ships or items. |
|
|
|
Pages: [1] :: one page |
First page | Previous page | Next page | Last page |