|
Author |
Thread Statistics | Show CCP posts - 1 post(s) |
Ulmega
|
Posted - 2011.04.05 19:56:00 -
[1]
Edited by: Ulmega on 05/04/2011 19:57:46 Haven't changed any eve settings, even when i put them on low it stays the same.
all i've done is reset my Cmos to get my keyboard to work.
I run Crysis 2 perfectly.
|
Ulmega
|
Posted - 2011.04.05 20:03:00 -
[2]
Nope
|
Ulmega
|
Posted - 2011.04.05 20:20:00 -
[3]
Edited by: Ulmega on 05/04/2011 20:20:09 I'm using an ATI Sapphire 6850 GB GDDR5 PCI card
Every other game runs perfectly. Eve ran perfect a few hours ago.
|
Ulmega
|
Posted - 2011.04.05 20:33:00 -
[4]
50m to ever can fix it! lol
|
Ulmega
|
Posted - 2011.04.05 20:42:00 -
[5]
Things are fine in task manager and i haven't updated anything.
|
Ulmega
|
Posted - 2011.04.05 20:44:00 -
[6]
Originally by: The DRUDGE Have you ran diagnostics on ur hard drive? and maybe try listening to it for abnormal sounds? I had a corp member who's eve client would use alot of resources and it was tracked to a hard drive that was close to dying.
No abnormal noises comming from the HD
|
Ulmega
|
Posted - 2011.04.05 21:42:00 -
[7]
Im trying to re-install atm, if it doesnt fix the issue i'll try all the things you have suggested :)
|
Ulmega
|
Posted - 2011.04.05 21:58:00 -
[8]
Thanks for the great response guys. It's nice to see the EVE community helping 1 and other! :D
Nearly done installing.
|
Ulmega
|
Posted - 2011.04.05 22:12:00 -
[9]
Originally by: Grey Stormshadow Edited by: Grey Stormshadow on 05/04/2011 22:05:56 As you reseted your bios, would check the power saving profiles from there, all settings related to pci express speed and that plug and pray os setting is enabled... and pretty much everything else what can be even remotelly related...
...and as you needed to open your box to reset bios, it is prolly good idea to recheck that you didn't accidently kill the gfx adapters fan... if it doesnt spin, fps obviously drops because card overheats and goes to "safe mode".
The GPU is fine, Fan works and it doesnt go over 50 C.
I had alook at the bios i couldn't see anything concerning the power output to the GPU but ill have another look.
btw still go the issue after a re-install
|
Ulmega
|
Posted - 2011.04.05 22:16:00 -
[10]
Id be open to anyone wanting to try Team viewer or some other Remote controlling software.
|
|
|
|
|