|
Author |
Thread Statistics | Show CCP posts - 1 post(s) |
Sonny Mogwai
Dreaming Tree
0
|
Posted - 2014.10.01 22:50:00 -
[1] - Quote
There seems to be a mistake in Cheetah powergrid. Pyfa shows 21.1MW but it is actually 20.1 in game. Unfortunately this cost me unnecessary purchases of implants etc, but now I have either offline one mode or to replace the implant. |
Sonny Mogwai
Dreaming Tree
0
|
Posted - 2014.10.02 13:06:00 -
[2] - Quote
Sable Blitzmann wrote:Sonny Mogwai wrote:There seems to be a mistake in Cheetah powergrid. Pyfa shows 21.1MW but it is actually 20.1 in game. Unfortunately this cost me unnecessary purchases of implants etc, but now I have either offline one mode or to replace the implant. Cheetah actually has 15 powergrid, and it's being correctly shown in Pyfa. Double check your fit and your character.
Hmm, I run out of ideas.
Pyfa screenshot: http://i.imgur.com/t8JZDdU.png
In-game fitting, same character: http://i.imgur.com/C9Vt4Sj.png
I am not saying I am right, I am simply struggling to resolve it. |
Sonny Mogwai
Dreaming Tree
0
|
Posted - 2014.10.02 13:36:00 -
[3] - Quote
Sonny Mogwai wrote:Sable Blitzmann wrote:Sonny Mogwai wrote:There seems to be a mistake in Cheetah powergrid. Pyfa shows 21.1MW but it is actually 20.1 in game. Unfortunately this cost me unnecessary purchases of implants etc, but now I have either offline one mode or to replace the implant. Cheetah actually has 15 powergrid, and it's being correctly shown in Pyfa. Double check your fit and your character. Hmm, I run out of ideas. Pyfa screenshot: http://i.imgur.com/t8JZDdU.pngIn-game fitting, same character: http://i.imgur.com/C9Vt4Sj.pngI am not saying I am right, I am simply struggling to resolve it.
I think I found the problem. Beta Reactor Control: Reaction Control (10% PG bonus) is no longer available. It was replaced by : Beta Reactor Control: Diagnostic System I (5% PG bonus).
Should it not be removed from pyfa to avoid confusion then? I thought it was simple 1 to 1 name change. |
Sonny Mogwai
Dreaming Tree
0
|
Posted - 2014.10.02 17:22:00 -
[4] - Quote
Sable Blitzmann wrote:Sonny Mogwai wrote:Sonny Mogwai wrote:Sable Blitzmann wrote:Sonny Mogwai wrote:There seems to be a mistake in Cheetah powergrid. Pyfa shows 21.1MW but it is actually 20.1 in game. Unfortunately this cost me unnecessary purchases of implants etc, but now I have either offline one mode or to replace the implant. Cheetah actually has 15 powergrid, and it's being correctly shown in Pyfa. Double check your fit and your character. Hmm, I run out of ideas. Pyfa screenshot: http://i.imgur.com/t8JZDdU.pngIn-game fitting, same character: http://i.imgur.com/C9Vt4Sj.pngI am not saying I am right, I am simply struggling to resolve it. I think I found the problem. Beta Reactor Control: Reaction Control (10% PG bonus) is no longer available. It was replaced by : Beta Reactor Control: Diagnostic System I (5% PG bonus). Should it not be removed from pyfa to avoid confusion then? I thought it was simple 1 to 1 name change. Ah, you didn't tell me what module you were using on cheetah, so I thought you were discussing base stats. Beta Reactor Control: Reaction Control I should have been converted to Compact Reactor Control Unit as per Oceanus module tiericide, and it is no longer available in pyfa. The problem is you are not using an up to date pyfa version. You are at least many releases out of date (no mining stats button, cargo support, and it seems no rack separation). Since you're many releases behind, I recommend backing up your fits with File -> Backup All Fittings, just in case. Then please download and install latest pyfa version (v1.5.1): https://github.com/DarkFenX/Pyfa/releases
I kept my pyfa up to date (or at least I thought so), but at some point installer could not recognize correct path and installed a new version into: D:/Program Files/pyfa/pyfa rather than D:/Program Files/pyfa so I had multiple versions installed.
Now reinstalled into correct folder pyfa wouldn't launch at all. Which exe file should I run? pyfa.exe? Seems like there is a lot of rubbish in that folder now. There is pyfa-1.1.20-rubicon-1.1-win there but not oceanus related file. |
Sonny Mogwai
Dreaming Tree
0
|
Posted - 2014.10.03 02:01:00 -
[5] - Quote
Sable Blitzmann wrote:Sounds like you have some cleanup to do. Delete D:/Program Files/pyfa/ and start over, don't keep old versions. Oceanus release is at the top of the page I linked. Here's a direct link to the latest release: https://github.com/DarkFenX/Pyfa/releases/tag/v1.5.1 Download buttons are on the bottom. I don't know where you are getting pyfa-1.1.20-rubicon-1.1-win but that release is 10 months old. Windows has two versions: simple zip file, and an installer. Installer is easier and will install over older installed versions. The file you should run is pyfa.exe. Yes, the root folder is messy, but it's been that way for years. Make sure you are running the correct version by going to Help -> About. It should list v1.5.1 as the version. Here's a direct link to the latest installer: https://github.com/DarkFenX/Pyfa/releases/download/v1.5.1/pyfa-1.5.1-oceanus-1.0-win.exeHope that helps.
Thanks. I have had correct installer downloaded already. Before I delete anything.... Where are all fits kept in? Wouldn't like to lose hundreds of my fittings.
|
Sonny Mogwai
Dreaming Tree
0
|
Posted - 2014.10.03 12:49:00 -
[6] - Quote
Sable Blitzmann wrote:Sonny Mogwai wrote:
Thanks. I have had correct installer downloaded already. Before I delete anything.... Where are all fits kept in? Wouldn't like to lose hundreds of my fittings.
By default (unless you've messed with the config file), fits are stored in a file called saveddata.db in %USERPROFILE%\.pyfa.
I haven't messed with anything at all. Frankly quite opposite.
Uninstalled pyfa, deleted the folder, installed it back, run pyfa.exe and... nothing happens. No error message, nothing. Simply wouldn't start.
This is my error_log.txt content:
https://justpaste.it/hfaf Couldn't post it here, thats why external link. |
Sonny Mogwai
Dreaming Tree
0
|
Posted - 2014.10.03 13:04:00 -
[7] - Quote
Sonny Mogwai wrote:Sable Blitzmann wrote:Sonny Mogwai wrote:
Thanks. I have had correct installer downloaded already. Before I delete anything.... Where are all fits kept in? Wouldn't like to lose hundreds of my fittings.
By default (unless you've messed with the config file), fits are stored in a file called saveddata.db in %USERPROFILE%\.pyfa. I haven't messed with anything at all. Frankly quite opposite. Uninstalled pyfa, deleted the folder, installed it back, run pyfa.exe and... nothing happens. No error message, nothing. Simply wouldn't start. This is my error_log.txt content: https://justpaste.it/hfafCouldn't post it here, thats why external link.
OK, I got it working again. For folks who may experience similar problems here is what I did: - Uninstall everything - Backup .pyfa folder and delete it from %USERPROFILE% - Install fresh pyfa - copy saved earlier saveddata.db to .pyfa folder
Thanks for your help.
|
Sonny Mogwai
Dreaming Tree
0
|
Posted - 2014.10.03 18:40:00 -
[8] - Quote
Sable Blitzmann wrote:That error happens on 1.5.0. It seems you did not download the version I suggested at first. But at least it's working now. Please double check your version from Help > About. I don't want you to work with outdated data. =)
All is good now. Thanks again. |
Sonny Mogwai
Dreaming Tree
0
|
Posted - 2014.11.12 08:57:14 -
[9] - Quote
Problem signature: Problem Event Name:APPCRASH Application Name:pyfa.exe Application Version:0.0.0.0 Application Timestamp:49180193 Fault Module Name:sqlalchemy.cresultproxy.pyd Fault Module Version:0.0.0.0 Fault Module Timestamp:4e9b307d Exception Code:c0000005 Exception Offset:000012aa OS Version:6.1.7601.2.1.0.768.3 Locale ID:2057 Additional Information 1:0a9e Additional Information 2:0a9e372d3b4ad19135b953a78882e789 Additional Information 3:0a9e Additional Information 4:0a9e372d3b4ad19135b953a78882e789
Pyfa doesn't start after recent update. I am getting above error message. System Win8 |
Sonny Mogwai
Dreaming Tree
0
|
Posted - 2014.12.11 13:50:45 -
[10] - Quote
It's became a tradition to post here after every pyfa update :P.
This time the problem is:
Problem signature: Problem Event Name:APPCRASH Application Name:pyfa.exe Application Version:0.0.0.0 Application Timestamp:49180193 Fault Module Name:sqlalchemy.cresultproxy.pyd Fault Module Version:0.0.0.0 Fault Module Timestamp:4e9b307d Exception Code:c0000005 Exception Offset:000012aa OS Version:6.1.7601.2.1.0.768.3 Locale ID:2057 Additional Information 1:0a9e Additional Information 2:0a9e372d3b4ad19135b953a78882e789 Additional Information 3:0a9e Additional Information 4:0a9e372d3b4ad19135b953a78882e789
TIA |
|
|
|
|