Pages: 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 .. 111 :: one page |
|
Author |
Thread Statistics | Show CCP posts - 9 post(s) |
tomato1
The Scope Gallente Federation
4
|
Posted - 2012.02.21 19:03:00 -
[2011] - Quote
okay well i live in 0.0 something i think would help is if the station told you number people docked instead counting i could quickly check how many in local to number docked and sort know how many active nothing major just counter tell me how many in station |
tomato1
The Scope Gallente Federation
4
|
Posted - 2012.02.21 19:17:00 -
[2012] - Quote
d scan another one in reality its one the hardest things to use in eve....effectively
something really simple okay if im scaning 60 degrees how about some lines or something to tell me what i am scaning not stare into space and judge what my scan is covering when your hunting time is kills
another d scan is distance mayb ewhen you have d scan open it doesnt just tell you how wide scan is but distance to high light whats scaned and whats not
look im not dumb i can do math but feels like i have to convert a lot its like me as a welder i have work with metric and imprial measurement systems...doesnt make sence....same as km contverting to au on the dscan
the angle changer bottton it self needs be biger...easier idk nicer to use |
tomato1
The Scope Gallente Federation
4
|
Posted - 2012.02.21 19:29:00 -
[2013] - Quote
drone interface
now if you flown carrier lanching and docking drones is pain as lease i have it to be so would be nice if could recall drones faster i dont know if you have played starcraft 2 but theres unit called blink stalkers basicly when it gets low on hp you blink it back out way its called microing your units now in eve its bloody hard to do that quickly when your going through right click menus and when you recall a drone it turns into a expanded list like say your drone being shot would be cool if there was bottons being numbered 1-5 (1-10 carriers) and flash when one is shot and you would press that call back that drone not the entire group this would be like a huge buff i would think to gal ships to be honest
my sujestion is something like organized (for you) in class like small, med, heavy, fighter. get rid of that right click menu use nice big bottons so you can acess what you want to happen in a faster manner |
tomato1
The Scope Gallente Federation
4
|
Posted - 2012.02.21 19:33:00 -
[2014] - Quote
hangers
so i have played eve long time i can find my items no prob cause i know the order eve puts them in when im looking at 500 diff items in hanger
so why not lines down the hanger window catagories guns shield armor drones ammo like that would clean it up
a lot these things are like you have think what its like for the new guy |
tomato1
The Scope Gallente Federation
4
|
Posted - 2012.02.21 19:52:00 -
[2015] - Quote
jump cloning
so when i want to jump clone....why why do i have to stop my training open up my training i get it maybe i have implants changes the time skill finishes well cant you pop it up for me so its easy idk maybe im high matance |
Rob Crowley
State War Academy
7
|
Posted - 2012.02.22 11:44:00 -
[2016] - Quote
Add the ability to add stuff to the market quickbar from existing market orders. Bonus points if doable by drag'n'drop. Super combo bonus points if you can drag'n'drop from existing orders into chat to link the item.
Remove the useless and misleading Inertia Modifier attribute from fitting screen and replace it with something that can actually be used to gauge agility, maybe the multiplication of mass with IM or something like that.
Let me drag'n'drop bookmarks from the Eve menu into chat.
Expand the functionality of the "Use Active Overview Setting" option at directional scanner to let me choose any of my saved settings not just the active one. |
Bloodpetal
Mimidae Risk Solutions
499
|
Posted - 2012.02.22 14:01:00 -
[2017] - Quote
Overview Filter "State" Settings is very obtuse as well as very very non-sensical from the standpoint of WHY would you want to filter like this.
The issue is simple :
For example, In order to see a CORP MATE to filter out ONLY FOR CORP MATES you can NOT DO IT. You are forced to show all "No Standings"/"Blue Standings", etc with your corpmates because :
You need to add has "Low" OR "Bad" security standings, so you see any corpmates with low sec standings You need to add NO STANDING filter, so you see corpmates you don't have set any standings. As of the last patch you know also need to add "HAS A BOUNTY", so you HAVE TO SEE people with bounties, if you have corpmates with bounties. Basically, it's IMPOSSIBLE TO say "I want to filter for "Pilot is in your corp". and ONLY see corpmates. You have to see, PIRATE, NEUTRALS, and BOUNTIES. Basically, you HAVE to show everyone anyways!! The check should show any and all people who match those criteria being checked, not only those who intersect at the selected criteria.
The reason is simple, the Overview Filter states works on INTERSECTION LOGIC rather than simply UNION logic of all who meet the criteria checked
ON top of it all, it bugs out when I change the pilots standings in the middle of changing overview settings.
This video demonstrates how filtering is crazy :
http://youtu.be/c1xegAGYV8U
Please, make this simple. Mimidae Risk Solutions Recruiting |
SabotNoob
Sabot Industries
42
|
Posted - 2012.02.22 15:53:00 -
[2018] - Quote
On the market quickbar: If you create a new folder, you can't drag items into it from the bottom of your quickbar list if those items are out of view. This happens when you have a list that is long enough to have a vertical scroll bar appear. When you use your scroll bar to view the last items on your list, your new folder is not viewable any more and trying to drag an item from the bottom up to the folder doesn't move the list at all. This needs fixing. |
tomato1
The Scope Gallente Federation
4
|
Posted - 2012.02.22 17:19:00 -
[2019] - Quote
i do incursions first thing tell you everybody has logi 5 but you really never know would be cool if there was a way to show that i know there certs but theres reason nobody cares about them cause they really dont tell anybody anything like i fly logi i have noway of letting people know i really am logi 5....yes link it who says its my ship fitting could be a saved fitting its that easy anyhow its all i have to say |
tomato1
The Scope Gallente Federation
4
|
Posted - 2012.02.22 18:49:00 -
[2020] - Quote
fleet broad cast bottons are tiny as hell |
|
tomato1
The Scope Gallente Federation
4
|
Posted - 2012.02.22 20:13:00 -
[2021] - Quote
how do you expect new discussion in the forums if the latest comment is last one...youtube does it recent comments are on top why cant ccp...right there little bit different |
tomato1
The Scope Gallente Federation
4
|
Posted - 2012.02.22 21:28:00 -
[2022] - Quote
when im saving my overview settings i have to always "save as" not just save...if i want to make changes to my overview would be nice if i could just save it an not make new file or overwrite it just makes it simpler |
Krios Ahzek
GoonWaffe Goonswarm Federation
721
|
Posted - 2012.02.22 22:35:00 -
[2023] - Quote
This game needs HUD icons for when you are jammed, warp disrupted, webbed and etc. It doesn't need to show by whom, but a great big ''You can't warp'' icon would be appreciated.
-áThough All Men Do Despise Us |
Jint Hikaru
OffWorld Exploration Inc
100
|
Posted - 2012.02.23 13:56:00 -
[2024] - Quote
This thread from the ideas forum
TLDR,
Brevator wrote:If you've set multiple destinations via waypoints, you can come across a system where in your overview you can have 2+ yellow highlighted stargates which causes a delay.
In order for you to figure out which stargate to jump to, you can do one of two things, either hit the auto pilot button and wait for it to align or you need to look at the name of the next system and then select the appropriate stargate in your overview provided you have the "Name" tab enabled and open wide enough to see enough of the name.
If the next jumpgate in your route stays the same highlighted colour (its bright yellow for me) on the overview, but other jumpgates that you have to pass through later on your journey could be changed to a different colour.
This would remove an annoyance from the game.
My thanks to Brevator, for proposing the idea.
Jint Hikaru - Miner / Salvager / Explorer / SpaceBum In the beginning the Universe was created. This has made a lot of people very angry and been widely regarded as a bad move. |
Merritoff
Zod's Minions
11
|
Posted - 2012.02.23 20:31:00 -
[2025] - Quote
To be able to launch the star map straight of the Agent Locator.
At the moment I need to;
1. set destination 2. right click final waypoint -> show info 3. show system info -> display on map
if there is a faster way
secondly; more likely not a "little thing". I like to able to see regular intel (statisics) types on the star map. How possible would it be to have a floating tool bar of favorites for the starmap. (rather than needing to have to mininalise the starmap control panel). |
Nephilius
Grey Legionaires
328
|
Posted - 2012.02.23 22:00:00 -
[2026] - Quote
Don't know if this has been mentioned yet (and i am not searching through 102 pages of posts) but warping in on acceleration gates. Sometimes it's okay, but other times it puts you so close that you continually bounce off an invisible wall after activating the gate. That is very aggravating, even if it only takes a minute or two to correct.
Make the minimum warp in point to any acceleration gate at about 1500 meters. This would alleviate the clipping issue.
Just my little pet peeve. To stand before a man at an inquisition, knowing that he will rejoice when we die, knowing that he will commit us to the stake and its horrors without a moment's hesitation or remorse if we do not satisfy him, is not an experience much less cruel because our inquisitor does not whip us or rack us or shout at us. |
Ibeau Renoir
Colonial Fleet Services Independent Faction
23
|
Posted - 2012.02.24 01:00:00 -
[2027] - Quote
tomato1 wrote:hangers
so i have played eve long time i can find my items no prob cause i know the order eve puts them in when im looking at 500 diff items in hanger
so why not lines down the hanger window catagories guns shield armor drones ammo like that would clean it up
a lot these things are like you have think what its like for the new guy Little thing for the forums: Reject posts containing no punctuation at all.
(I didn't read your posts because the lack of punctuation makes it too hard.) Ceci n'est pas un sig. |
Ibeau Renoir
Colonial Fleet Services Independent Faction
23
|
Posted - 2012.02.24 01:11:00 -
[2028] - Quote
When selecting "dock" or "jump" from outside dock/jump range, if you are cloaked, wait until the ship decloaks before trying it.
Alternatively, automatically turn off the cloak when within docking/jumping range before attempting to dock/jump.
Basically, warp-and-jump in particular is unreliable when you routinely cloak just after beginning to align for the warp to gate. It should not matter that you chose to cloak while warping.
edit: The case of docking was fixed in Crucible 1.1.1, but the case of jumping wasn't.
edit 2: Actually it wasn't! I just now clicked warp-and-dock and got "You cannot dock because you are cloaked." Ceci n'est pas un sig. |
Caldari Citizen20110707
Caldari Provisions Caldari State
7
|
Posted - 2012.02.24 13:46:00 -
[2029] - Quote
High sec incursions are safer & better. 0.0 incursions are conciderd a pain in the ash
https://forums.eveonline.com/default.aspx?g=posts&t=73610&find=unread |
E man Industries
SeaChell Productions
222
|
Posted - 2012.02.24 16:13:00 -
[2030] - Quote
tomato1 wrote:i do incursions first thing tell you everybody has logi 5 but you really never know would be cool if there was a way to show that i know there certs but theres reason nobody cares about them cause they really dont tell anybody anything like i fly logi i have noway of letting people know i really am logi 5....yes link it who says its my ship fitting could be a saved fitting its that easy anyhow its all i have to say More an issue for dps ships...Oh i'm faction fitted.. Other logi will know real fast if you are not logi 5.
Need more-ádecent content a casual player can access in a 1-2h play period that is actually fun and contributes to long term personal and corp goals. This applies to PvE and PvP. |
|
YuuKnow
151
|
Posted - 2012.02.24 23:42:00 -
[2031] - Quote
I wish there was a way to tone down the brightness of some of the engine flames. Some of the Amarrian engine glows (Providence, etc) are so bright that it actually gives me eye-aches unless I zoom out very far (and then you can't appreciate the nice skins). Perhaps a slider option for engine-glow-brightness in the options menus would be appropriate. |
Pierced Brosmen
Priory Of The Lemon
61
|
Posted - 2012.02.25 01:04:00 -
[2032] - Quote
Drone control:
When having drones set to be Passive, but set to assist a fleet member, the drones seems to completely forget their passive setting and starts aggressing targets randomly when the person they are assisting doesn't aggress anything.
The drones should stick with their passive setting when assisting (but not when guarding) |
malaire
249
|
Posted - 2012.02.25 17:26:00 -
[2033] - Quote
Please fix calculation of average price used in "modify order" window.
... [ 2012.02.25 08:38:19 ] (warning) The price you have chosen is 49947.89 % above regional average. Are you sure you want to enter this order? [ 2012.02.25 08:38:27 ] (warning) The price you have chosen is 51904.41 % above regional average. Are you sure you want to enter this order? [ 2012.02.25 08:39:01 ] (warning) The price you have chosen is 29904.88 % above regional average. Are you sure you want to enter this order? [ 2012.02.25 08:39:38 ] (warning) The price you have chosen is 11000679452 % above regional average. Are you sure you want to enter this order? [ 2012.02.25 09:01:40 ] (warning) The price you have chosen is 11000686058 % above regional average. Are you sure you want to enter this order? ...
I get these really often with low volume items when I *know* that there has been no really low orders fulfilled recently (because I had region wide order whole time.)
New to EVE? Don't forget to read: The Manual * The Wiki * The Career Options * and everything else |
Tsubutai
The Tuskers
74
|
Posted - 2012.02.25 20:19:00 -
[2034] - Quote
I would like there to be a way to toggle heat on and off while under gate cloak. At the moment, if you need to overload your propulsion/tackle/guns on jumping into a hostile group, you have to madly scramble to toggle heat on everything and then activate all modules. It would be much more straightforward and more user-friendly if you could toggle heat on modules before breaking cloak so that when you do decloak, you just have to hit one button/shortcut key per mod rather than modifier + hotkey followed by hotkey. |
Fire Stone
Celestial Horizon Corp. Flatline.
22
|
Posted - 2012.02.25 23:22:00 -
[2035] - Quote
Post here with a lot of manufacturing paper cuts :-)
https://forums.eveonline.com/default.aspx?g=posts&t=69591&find=unread
My biggest are below
* When putting in a manufacturing job automatically select the slot with the lowest queue/leave the ability to select a different queue thou. * Automatically deliver build jobs once complete vs having to click a button for each *** Change the cancel job button so only a director or above can cancel a build job *** |
tomato1
The Scope Gallente Federation
4
|
Posted - 2012.02.27 08:22:00 -
[2036] - Quote
Ibeau Renoir wrote:tomato1 wrote:hangers
so i have played eve long time i can find my items no prob cause i know the order eve puts them in when im looking at 500 diff items in hanger
so why not lines down the hanger window catagories guns shield armor drones ammo like that would clean it up
a lot these things are like you have think what its like for the new guy Little thing for the forums: Reject posts containing no punctuation at all. (I didn't read your posts because the lack of punctuation makes it too hard.)
you know;// i really'-!!!!?want!?!?to call you a "FAGgG"?":cause you are a faggg
no one cares its the content maybe your brain too broken and dumb to plug it in and know what your reading get over yourself |
RedLion
Oberon Incorporated RAZOR Alliance
11
|
Posted - 2012.02.27 23:54:00 -
[2037] - Quote
I know it's said before, and CCP have probably thought this through, but I beg you to consider this change.
- Reduce clone cost
This will make it easier to go pick small scale fights for bittervets. It will also help encourage carebears to try and participate in PvP.
Secondly:
- Remove attribute implants
This will make it easier for care bears to join in on PvP if they don't lose their +5s or have to clone jump. |
Andrea Griffin
179
|
Posted - 2012.02.28 02:40:00 -
[2038] - Quote
It should be easy to see what wars a corporation is in. Each corporation's information screen should have a list of all active wars somewhere. I shouldn't have to go to MY corporation screen, click the wars tab, select the "Other Wars" tab, and finally search for the alliance or corporation. CCP Sreegs is my favorite developer. |
Malkev
GRUMPS RESEARCH TEAM
39
|
Posted - 2012.02.28 17:38:00 -
[2039] - Quote
TIME + DATE THANKS |
Pierced Brosmen
Priory Of The Lemon
61
|
Posted - 2012.02.28 22:35:00 -
[2040] - Quote
Industry:
When an assembly array or lab is offline the slots should be marked as "Offline" and not "Now" in the "Next Free Time" collumn, when trying to chose a slot for a job or browsing the "Installations" tab of the "Science & industry" window.
Also if a corp member does not have roles to use the array, it should list as "Unavailable"
[Edit] Also, there should be a filtering option to toggle wether or not to show arrays that are offline or unavaliable. |
|
|
|
|
Pages: 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 .. 111 :: one page |
First page | Previous page | Next page | Last page |