EVE Search - Shield Tanking a Domi

Check My IP Information

All Channels

Ships and Modules

Shield Tanking a Domi

» Click here to find additional results for this topic using Google

Monitor this thread via RSS [?]

Pages: [1] :: one page

Author	Thread Statistics \| Show CCP posts - 0 post(s)
Naran Darkmood Gallente MC Cubed Inc	Posted - 2006.09.01 06:36:00 - [1] I'm looking into shield tanking my Domi. This would be mainly for missions against Angels and other rats doing explosive damage and even more so for the parts of those missions where you can't use drones. As I'm pretty new to shield tanking, I would appriciate some help. My guess would be something like: Highs: guns, lots of them med: 1 XL shield booster 1 shield boost amp 2 active hardeners 1 invul field lows: 3 reactor controls (those thinks boositng shield hp, shield recharge and cap recharge) 2 Damage mods 2 ? Also I read a lot of passive shield tanks are good on Gallente ships. How would I setup one of those? Any suggestions welcome. Please keep your response constructive! ----------------------------------------------- Warning: The above post may contain irony or sarcasm. If you are not fit to handle this, go the the beginning and start deleting the post from yopu
LUKEC Destructive Influence Band of Brothers	Posted - 2006.09.01 08:40:00 - [2] fit 250mm rails II since minmatar battleships have nasty habit of either keeping big distance(34-38km) or orbiting at 7km quite fast,med rails work on both ranges. Then i'd rather fit 2x t2 invul and 1 hardener and fill lows with pdus+cpu --------------------- Looking for frentix? Mail me.
Admiral IceBlock Caldari Northern Intelligence SMASH Alliance	Posted - 2006.09.01 09:14:00 - [3] Hmmm. What about 6 x 250mm 1 x XL Booster 2 x Shield Amps 2 x Invul Fields 6 x Cap Relays 1 x Damage Control ? :P
Pottsey Gallente Dissonance Corp Interstellar Starbase Syndicate	Posted - 2006.09.01 11:07:00 - [4] Edited by: Pottsey on 01/09/2006 11:08:10 For a passive tank get the 2 or 3 implants and fit 1 or 2 invul fields, 3 or 4. T2 shield extenders and if you want speed 1 afterburner. 1 or 2 PDS and the rest shield relays if you unsure on the tank fit a warp core stab. med: 1 invul field 1 invul field or shield extender 2 shield extender 1 shield extender or afterburner lows: 1-2 PDS or shield relays depending on your cap. 5 shield relays 1 shield relays or warp core stab (8 slots used so scarp 1 module based on what suits your play style) If your doing lvl 3 missions the above means your pretty much never going die. ô3 reactor controls (those thinks boositng shield hp, shield recharge and cap recharge)ö Reactor controls boost power grid. YouÆre thinking of PDS (power diagnostic systems) ThatÆs a good choice for an active shield tank. You should hit about 15 to 20ish passive which is nice on top of the active booster. Passive shield tanking guide, click here.
jamesw Omniscient Order	Posted - 2006.09.01 12:35:00 - [5] If you are fitting for shield tanking, 350mm rail II's fit nicely. You can even fit 425's with some squeezing. But with an armor tank, dual 250 II's allow for some mean resists. -- NEW Vid: Domi For the Win!
Stanis Gallente 4S Corporation Morsus Mihi	Posted - 2006.09.01 12:43:00 - [6] jamesw I want to fight your Domi :P.
Naran Darkmood Gallente MC Cubed Inc	Posted - 2006.09.01 12:54:00 - [7] Thanks for your tips, I'll have to try them out. Originally by: Pottsey Edited by: Pottsey on 01/09/2006 11:08:10 ô3 reactor controls (those thinks boositng shield hp, shield recharge and cap recharge)ö Reactor controls boost power grid. YouÆre thinking of PDS (power diagnostic systems) ThatÆs a good choice for an active shield tank. You should hit about 15 to 20ish passive which is nice on top of the active booster. That's actually what I meant, but I couldn't remember the correct name. ----------------------------------------------- Warning: The above post may contain irony or sarcasm. If you are not fit to handle this, go the the beginning and start deleting the post from yopu
Naran Darkmood Gallente MC Cubed Inc	Posted - 2006.09.01 12:57:00 - [8] Originally by: jamesw If you are fitting for shield tanking, 350mm rail II's fit nicely. You can even fit 425's with some squeezing. But with an armor tank, dual 250 II's allow for some mean resists. For my armour tank it's more the question of fitting 1 or 2 LARs that decide if I can use 350mms or of to be contend with dual 250mms ... ----------------------------------------------- Warning: The above post may contain irony or sarcasm. If you are not fit to handle this, go the the beginning and start deleting the post from yopu
Magnus Thermopyle Chosen Path Lotka Volterra	Posted - 2006.09.01 13:09:00 - [9] I have run lvl4 missions in a shield tanked domi for 6 months. It is a nice ship/setup for missions, but you need lots of skillpoints to run it effectively (drones, guns, tank, etc). My setup: - 6425 rails - gisti xlarge booster, 2hardener, shield boost amp, tracking computer - 2mag stab, 5PDU - sentry drones and medium/small drones For the toughest missions (WC, Enemy Abound, zazzmatazz) I replace the tracking computer with another shield boost amplifier. I also have some crystal implants (I boost 1600 every 4 secs for 160 in cap).
James Lyrus Lyrus Associates Interstellar Starbase Syndicate	Posted - 2006.09.01 13:31:00 - [10] CPRs are incompatible with tanking. Lesee, you have 5 mids? For general purpose, I'd go with: XL booster, booster amp, EM hardener, 2x invuln field. Lows, power diags. With 7 lows, I'd lean to 1x damage control, 2x damage mods, and 4x PDS. T2/named when and where you can, yadda yadda yadda. Of course, I can't actually fly domis, so have absolutely no clue how well that'll work or fit :)

Borasao	Posted - 2006.09.01 13:50:00 - [11] Edited by: Borasao on 01/09/2006 13:50:51 Check out Raven fittings to get ideas about shield tanks. A Raven has six mids, though, so you'll drop one fitting there, but a Domi has two more lows so you can add stuff there. Typical Raven shield tank: Raven MID: Shield Boost Amp, XL Shield booster, 4x active hardeners, depending on rats So, do the same thing minus one hardener (you can run a Raven with 3 hardeners just fine in missions) Raven LOW: 3xPDU, 2xBCU Well, the BCU don't mean anything for a Domi so replace them with the appropriate damage mod. That leaves 4 slots open. You can fit two WCS so you'll never have to worry about being scrambled, for example. Or you can fit another damage mod and PDU. You can probably spend some time playing around with those two to find a setup you like but starting out, go with two more PDU (or two WCS) just to be on the defensive side until you see how it behaves, then adjust. As always, fit the parts above to what you can affort or have on hand (named, tech2, etc)


Pages: [1] :: one page
First page \| Previous page \| Next page \| Last page

COPYRIGHT NOTICE
EVE Online, the EVE logo, EVE and all associated logos and designs are the intellectual property of CCP hf. All artwork, screenshots, characters, vehicles, storylines, world facts or other recognizable features of the intellectual property relating to these trademarks are likewise the intellectual property of CCP hf. EVE Online and the EVE logo are the registered trademarks of CCP hf. All rights are reserved worldwide. All other trademarks are the property of their respective owners. CCP hf. has granted permission to EVE-Search.com to use EVE Online and all associated logos and designs for promotional and information purposes on its website but does not endorse, and is not in any way affiliated with, EVE-Search.com. CCP is in no way responsible for the content on or functioning of this website, nor can it be liable for any damage arising from the use of this website.