EVE Search - How to use an Industrial Core

Check My IP Information

All Channels

Science and Industry

How to use an Industrial Core

» Click here to find additional results for this topic using Google

Monitor this thread via RSS [?]

Pages: [1] 2 :: one page

Author	Thread Statistics \| Show CCP posts - 0 post(s)
Togae Alus	Posted - 2008.08.21 07:34:00 - [1] Well i have all the skills to use it but when i try to select a production line nothing comes up, what should i select

Chribba Otherworld Enterprises Otherworld Empire	Posted - 2008.08.21 10:15:00 - [2] 1) Fit IC to Rorqual 2) Load fuel and Compression BPOs into Rorqual 3) Undock and activate IC 4) Wait for cool Transformator-look-a-like sequence to complete 5) Right-click your BPO and chose manufacture (iirc) select your own assembly lines etc 6) ... 7) Profit or die because you got attacked while sieged.

Togae Alus	Posted - 2008.08.21 17:35:00 - [3] well i have done all that but it does not let me pick a line as it shows that none are available, can someone tell me what options should be selected and if the ore/bpo needs to be in the hangar or cargo bay
Alex Sheigh	Posted - 2008.08.21 18:40:00 - [4] Edited by: Alex Sheigh on 21/08/2008 18:42:28 Edited by: Alex Sheigh on 21/08/2008 18:40:07 Originally by: Chribba 1) Fit IC to Rorqual 2) Load fuel and Compression BPOs into Rorqual 3) Undock and activate IC 4) Wait for cool Transformator-look-a-like sequence to complete 5) Right-click your BPO and chose manufacture (iirc) select your own assembly lines etc 6) ... 7) Profit or die because you got attacked while sieged. He has done all of that but it does not work. I mean, its a pretty simple problem with seemingly no answer to be found. He cannot select and assembly line, as none are shown to be available and if he tries just clicking next he is given the "Cannot proceed as no assembly line was selected" message. Furthermore, he has filed a petition on this, asked for help repeatedly in the help channel (in-game), posted this thread, and both he and I have searched the web (mining guides and all) for hours trying to find an answer to this problem, but to no avail. No matter where you look, there does not seem to be a single person with an answer to this problem. So how about next time you decide to offer your oh-so-unhelpful advice, you at least read what his problem is first, k? Oh and yeah, we REALLY don't have to be worried about it being attacked, so the flippant remarks aren't necessary either... mumblesFreaking unhelpful forum n00bsmumbles

Chribba Otherworld Enterprises Otherworld Empire	Posted - 2008.08.21 18:50:00 - [5] Well I haven't had any problems using my IC/Rorqual to compress. iirc I had to select "location" to "my ship" or something like that, but like I said never been a problem. Maybe it a recent bug then as it's been months since I used it last time. And if so simply disregard my previous post will do. Secure 3rd party service ■ Veldspar

SurrenderMonkey	Posted - 2008.08.21 18:50:00 - [6] Originally by: Alex Sheigh Edited by: Alex Sheigh on 21/08/2008 18:42:28 Edited by: Alex Sheigh on 21/08/2008 18:40:07 Originally by: Chribba 1) Fit IC to Rorqual 2) Load fuel and Compression BPOs into Rorqual 3) Undock and activate IC 4) Wait for cool Transformator-look-a-like sequence to complete 5) Right-click your BPO and chose manufacture (iirc) select your own assembly lines etc 6) ... 7) Profit or die because you got attacked while sieged. He has done all of that but it does not work. I mean, its a pretty simple problem with seemingly no answer to be found. He cannot select and assembly line, as none are shown to be available and if he tries just clicking next he is given the "Cannot proceed as no assembly line was selected" message. Furthermore, he has filed a petition on this, asked for help repeatedly in the help channel (in-game), posted this thread, and both he and I have searched the web (mining guides and all) for hours trying to find an answer to this problem, but to no avail. No matter where you look, there does not seem to be a single person with an answer to this problem. So how about next time you decide to offer your oh-so-unhelpful advice, you at least read what his problem is first, k? Oh and yeah, we REALLY don't have to be worried about it being attacked, so the flippant remarks aren't necessary either... mumblesFreaking unhelpful forum n00bsmumbles Never used a Rorq, but there are other systems in the game where a similar sounding list is available and, sometimes, the objects don't show. In these cases, clicking one of the column head/sort tabs usually fixes it. No idea if this is such a list, but the description of the problem reminded me of it so I figured I'd throw it out there. --------------- Faction-Militia:Player-Alliance::Newbie-corp:Player-corp
Moon Dogg Gallente The Arrow Project Morsus Mihi	Posted - 2008.08.21 18:55:00 - [7] Originally by: Alex Sheigh mumblesFreaking unhelpful forum n00bsmumbles Hmmm, Chribba in the role of "unhelpful forum n00b". Not sure I've seen that one before. Tell you what, next time you and/or yours wants some help here in the forums, why don't you just forget about it. Chribba's "profit or die" comment did not warrant disrespect from you. Next.... *********************************** "Burn the land, boil the sea, you can't take the sky from me..."
Togae Alus	Posted - 2008.08.21 19:34:00 - [8] Well what my friend was trying to say is that after almost 18 hours of asking and searching for help no one has been able to suggest anything more advanced that what Cribba Said. what i need is a how to, with roles that i migth need, tabs setup and all that stuff
Xonox Galatorg Gallente Pulsar Combat Supplies Alternative Realities	Posted - 2008.08.21 19:50:00 - [9] Are you sure you have the filters set correctly? I can't look ingame right now (at work), but the main one that has to be changed is the one where it is looking for the type of installation, i.e. public, corporation. You want that one to be personal I believe (something similar was said by chribba). I've seen other people have this problem a couple times and this was their problem. -Xonox Pulsar Combat Supplies, Director of Production and POS
Xonox Galatorg Gallente Pulsar Combat Supplies Alternative Realities	Posted - 2008.08.21 19:51:00 - [10] Edited by: Xonox Galatorg on 21/08/2008 19:51:21 double post, oops -Xonox Pulsar Combat Supplies, Director of Production and POS

Togae Alus	Posted - 2008.08.21 19:52:00 - [11] tried that and no i cannot see any lines if i pick public, corporate or personal
Luc Ferros Rim Collection RC Kraftwerk.	Posted - 2008.08.21 20:14:00 - [12] Edited by: Luc Ferros on 21/08/2008 20:16:42 In there area with the selection of public/corporation and so forth, you have to scroll down to "My Ship" then it will work. and you have to have the industrial core active while doing it. You will then see 4 lines pop up for manufacturing.
Togae Alus	Posted - 2008.08.21 20:26:00 - [13] Did that too
Etho Demerzel Gallente Holy Clan of the Cone	Posted - 2008.08.21 23:04:00 - [14] Edited by: Etho Demerzel on 21/08/2008 23:04:36 Your inability to find a solution comes from the fact you have a problem nobody else has. That may be because: 1) It is a very rare bug only you were unfortunate to find 2) You are doing somethign wrong Your posture and the way you disregard the data given by people trying to help, calling then noobs even (including Chribba ) shows quite well your intelectual level. Given that, I am inclined to believe in the later over the former. Anyway good luck on your search and I hope you can find your "expert" solution before 2010. ===== "If a member of the EVE community finds he or she cannot accept our current level of transparency, we bid you good luck in finding a company that meets your needs." - CCP kieron...
Togae Alus	Posted - 2008.08.21 23:31:00 - [15] Edited by: Togae Alus on 21/08/2008 23:32:33 Originally by: Etho Demerzel Edited by: Etho Demerzel on 21/08/2008 23:04:36 Your inability to find a solution comes from the fact you have a problem nobody else has. That may be because: 1) It is a very rare bug only you were unfortunate to find 2) You are doing somethign wrong Your posture and the way you disregard the data given by people trying to help, calling then noobs even (including Chribba ) shows quite well your intelectual level. Given that, I am inclined to believe in the later over the former. Anyway good luck on your search and I hope you can find your "expert" solution before 2010. I am sorry if someone has felt insulted by my responses but the fact is that i have tried everything tried here, i even talked to someone that was in his roqual atm and it worked for him but not for me. i petitioned this but i havent got an answer form the GMs
Alex Sheigh	Posted - 2008.08.22 07:29:00 - [16] Originally by: Etho Demerzel Edited by: Etho Demerzel on 21/08/2008 23:04:36 Your inability to find a solution comes from the fact you have a problem nobody else has. That may be because: 1) It is a very rare bug only you were unfortunate to find 2) You are doing somethign wrong Your posture and the way you disregard the data given by people trying to help, calling then noobs even (including Chribba ) shows quite well your intelectual level. Given that, I am inclined to believe in the later over the former. Anyway good luck on your search and I hope you can find your "expert" solution before 2010. Two seperate people here...I am a friend of his and was getting kinda ****ed off how people weren't actually providing advice and telling him the same junk over and over again without helping him diagnose the problem. Hell, I even spent almost 2 hours of my own time trying to help him and I don't OWN or FLY a Rorqual... >.> ...As for the comment about a forum n00b, based on my experience I would say that Chribba did not fully read the first post (a breach of proper forum etiquette) - and as for my experience, I have over 10k posts on several different forums over the last 4 or so years...more if you count back further...Oh and the rest of your post after #2 really isn't needed...Thanks. Moving along - back to anyone wishing to provide Togae with help.

Chribba Otherworld Enterprises Otherworld Empire	Posted - 2008.08.22 07:57:00 - [17] I hope you find the solution to your problem. I will take my own 5500+ posts on this forum and move away from this thread now. Best of luck with all tasks you take on. /c Secure 3rd party service ■ Veldspar

Tillyn Gallente ShadowLight Production	Posted - 2008.08.22 08:00:00 - [18] being a long time rorq pilot the advice chribba gave on the 2nd post is correct the same process i use. i have been flying a rorq a long time allmost day 1 from when it was introduced and 1st built. you deffo have to be sure on what filter you use to find the manu slots i some times forget and theink WTF. well the advice given here is sound and can agree also jfyi you dont have to wait for the transformation you can run the compressions as soson as the module is activated :P "Rather Death than Disgrace"
Anti Protagonist Hiro Trade and Logistics	Posted - 2008.08.22 08:43:00 - [19] Your solution: 1) Take a screenshot 2) Post it on EVE-Files (I enjoy irony) 3) Post link here 4) People will see you can't follow instructions or you will have proof you/your friend are not a complete idiots I need a sig....
Karanth Gallente Eve's Brothers of Destiny FOUNDATI0N	Posted - 2008.08.22 11:10:00 - [20] Originally by: Anti Protagonist Your solution: 1) Take a screenshot 2) Post it on EVE-Files (I enjoy irony) 3) Post link here 4) People will see you can't follow instructions or you will have proof you/your friend are not a complete idiots This. Either petition it, or get a pile of screenies to show us. Make me pretty! ...Please?

Ichuki	Posted - 2008.08.22 13:50:00 - [21] Have you checked the filters for standing, alliance, corp, etc? Untick them all, then tick each one until the lines show up. That's how I sorted out not being able to see factory lines at a POS assembly array.
Doddy Omega Fleet Enterprises Executive Outcomes	Posted - 2008.08.22 15:00:00 - [22] Originally by: Alex Sheigh Originally by: Etho Demerzel Edited by: Etho Demerzel on 21/08/2008 23:04:36 Your inability to find a solution comes from the fact you have a problem nobody else has. That may be because: 1) It is a very rare bug only you were unfortunate to find 2) You are doing somethign wrong Your posture and the way you disregard the data given by people trying to help, calling then noobs even (including Chribba ) shows quite well your intelectual level. Given that, I am inclined to believe in the later over the former. Anyway good luck on your search and I hope you can find your "expert" solution before 2010. Two seperate people here...I am a friend of his and was getting kinda ****ed off how people weren't actually providing advice and telling him the same junk over and over again without helping him diagnose the problem. Hell, I even spent almost 2 hours of my own time trying to help him and I don't OWN or FLY a Rorqual... >.> ...As for the comment about a forum n00b, based on my experience I would say that Chribba did not fully read the first post (a breach of proper forum etiquette) - and as for my experience, I have over 10k posts on several different forums over the last 4 or so years...more if you count back further...Oh and the rest of your post after #2 really isn't needed...Thanks. Moving along - back to anyone wishing to provide Togae with help. Your freinds post was terrible and chribba answered as pretty much anyone would when the problem was not properly defined. Your post was far worse and you haven't done your freind any favours as people who might have helped are clearly not going to do so now. So really you should have read your freinds post before posting. Just because advice doesn't work doesn't mean it isn't advice.
Aluka 7th Amarr	Posted - 2008.08.22 17:38:00 - [23] Ok my buddy had same problem. Two solutions: 1) If no rigs - repack and assemble ship. 2) Report bug. My buddy had to report bug, and GM's repacked ships and gave him new rigs. Also they said it was the first rorq with that problem.. no assembly lines anywhere to be found...
Connner JUDGE DREAD Inc.	Posted - 2008.08.22 18:58:00 - [24] Awesome, I never thought I'd see a thread with someone calling Chribba a forum n00b. I lol'd. Seriously though, its either a bug or you missed a step or filter. If its a bug repack/unpack (if no rigs) or petition.
kid swizz	Posted - 2008.08.22 22:57:00 - [25] Originally by: Chribba I hope you find the solution to your problem. I will take my own 5500+ posts on this forum and move away from this thread now. Best of luck with all tasks you take on. /c 5500 unhelpful noob posts mirite guys?
Togae Alus	Posted - 2008.08.23 01:22:00 - [26] Originally by: Aluka 7th Ok my buddy had same problem. Two solutions: 1) If no rigs - repack and assemble ship. 2) Report bug. My buddy had to report bug, and GM's repacked ships and gave him new rigs. Also they said it was the first rorq with that problem.. no assembly lines anywhere to be found... hey can you tell your friend to evemail me
Aluka 7th Amarr	Posted - 2008.08.23 21:19:00 - [27] Edited by: Aluka 7th on 23/08/2008 21:20:12 His name is MECHcraft. Contact him... This is the solution to same problem as described above : "Gents , i can anounce with pleasure that the problems are over , 2 GMs fixed the problem , i took over 4 hours , and it was a bugged rorqual ! Rumours says that this rorqual is one of the first to have been builded , without assembly lines Razz Thx to everyone for helping !"
Togae Alus	Posted - 2008.08.25 06:03:00 - [28] well i have tried every combination of filters now, i have spent 30 k heavy water and this thing does not work the GMs do not pay attention to my petition so now i have a roqual that does nothing but haul It is very frustrating that after spending so much isk i have an overgrown hauler
Gunnar Jochen	Posted - 2008.08.25 15:50:00 - [29] I remember reading this problem a few months back. The problem then was to do with owning the Rorqual but not actually using it before the new expansion, then after the expansion, setting up the Rorqual showed up a bug that wouldnt give you any production line. The guy petitioned the GM and it was replaced with a "repaired" rorqual. A look through the forums from a few months back may throw some more info on it
Togae Alus	Posted - 2008.08.25 21:40:00 - [30] Well the way to fix the problem was for me to repackage the ship and now i just need to wait for my rigs to be refunded, thank you all for trying to help



Pages: [1] 2 :: one page
First page \| Previous page \| Next page \| Last page

COPYRIGHT NOTICE
EVE Online, the EVE logo, EVE and all associated logos and designs are the intellectual property of CCP hf. All artwork, screenshots, characters, vehicles, storylines, world facts or other recognizable features of the intellectual property relating to these trademarks are likewise the intellectual property of CCP hf. EVE Online and the EVE logo are the registered trademarks of CCP hf. All rights are reserved worldwide. All other trademarks are the property of their respective owners. CCP hf. has granted permission to EVE-Search.com to use EVE Online and all associated logos and designs for promotional and information purposes on its website but does not endorse, and is not in any way affiliated with, EVE-Search.com. CCP is in no way responsible for the content on or functioning of this website, nor can it be liable for any damage arising from the use of this website.