Pages: [1] :: one page |
|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Xornicon Altair
Woopatang
|
Posted - 2008.11.05 04:33:00 -
[1]
I'm looking into doing some low-sec mission busting using probes and whatnot. So, I need to fit both a Covops cloak AND a recon probe launcher. I've got Recon 5, so, CPU is less of an issue. My current setup is based around tracking disruption and neuts, then letting my drones do the killing. Not so good against missile boats, but, has otherwise proven itself to be a decent setup.
So, can anyone suggest a setup around the probe launcher that still maintains some deadliness so I can pop those missioning battleships?
|
Khandara Seraphim
StarHunt Fallout Project
|
Posted - 2008.11.05 04:53:00 -
[2]
I was fiddling with this exact question the other day and I've come to the conclusion that it can't be done.
I don't think it's possible to fit pilgrim with a cloak, prober, and enough neuts/tank to be anything more than an elaborate target. You're hundreds of CPU short even with recon V
|
Xornicon Altair
Woopatang
|
Posted - 2008.11.05 05:13:00 -
[3]
That sucks... that's really not the answer that I was looking for. Here's hoping someone else has found a viable solution.
|
Lyria Skydancer
Amarr Developmental Neogenics Amalgamated
|
Posted - 2008.11.05 05:14:00 -
[4]
There is a pretty crazy fit, I saw it few weeks ago but I cant remember where to find it or how to fit it. Need recon 5 and a couple of faction mods (not insane ones) but it's doable. ----------------------------------------- [Video] The Cruise |
Chimii Lecto
Gallente
|
Posted - 2008.11.05 10:58:00 -
[5]
I see what you're trying to do but i highly doubt its gonna be effective.
[Pilgrim, /NonEffective] Internal Force Field Array I 800mm Reinforced Rolled Tungsten Plates I 800mm Reinforced Rolled Tungsten Plates I Centii C-Type Adaptive Nano Plating Centii C-Type Adaptive Nano Plating
10MN Afterburner II Faint Warp Prohibitor I Balmer Series Targeting Inhibitor I, Tracking Speed Disruption X5 Prototype I Engine Enervator Medium Electrochemical Capacitor Booster I, Cap Booster 800
Medium Unstable Power Fluctuator I Medium Unstable Power Fluctuator I Covert Ops Cloaking Device II Recon Probe Launcher I, Snoop Scanner Probe I
Trimark Armor Pump I Trimark Armor Pump I
Hammerhead II x5
Idea would be to get under 5km range and orbit as tight as possible while hoping that you can either neut her guns or tracking disrupt them to avoid damage. Kill off the drones asap and pray they dont have more than one web =) ---------- /Pretty posting. |
Gneeznow
Minmatar North Eastern Swat Pandemic Legion
|
Posted - 2008.11.05 11:04:00 -
[6]
this works with recon 4, its pricey, and not very effective though it'll take like 400 seconds for a scan
Adaptive Nano Plating II Adaptive Nano Plating II Adaptive Nano Plating II Dread Guristas Co-Processor 1600mm Reinforced Rolled Tungsten Plates I
Faint Warp Prohibitor I X5 Prototype I Engine Enervator Medium Electrochemical Capacitor Booster I, Cap Booster 800 Balmer Series Targeting Inhibitor I Industrial Capacitor Recharger
Covert Ops Cloaking Device II Scan Probe Launcher I, Snoop Scanner Probe I 50W Infectious Power System Malfunction 50W Infectious Power System Malfunction
Egress Port Maximizer I Gravity Capacitor Upgrade I
Hammerhead II x5
|
Johann Jeneau
Gallente Cricas Portuguese Korp
|
Posted - 2008.11.05 11:23:00 -
[7]
Edited by: Johann Jeneau on 05/11/2008 11:31:31 Edited by: Johann Jeneau on 05/11/2008 11:28:56 I'm using this pre-patch but cant really say if it's good solo, everytime i was solo the mission runners were paying attention to probes
it needs a 3% cpu implant and recon V
[Pilgrim, probing] 1600mm Reinforced Rolled Tungsten Plates I Pseudoelectron Containment Field I Domination Medium Armor Repairer Centii C-Type Adaptive Nano Plating Centii C-Type Adaptive Nano Plating
10MN Afterburner II Medium Electrochemical Capacitor Booster I, Cap Booster 800 J5 Prototype Warp Inhibitor I X5 Prototype I Engine Enervator Balmer Series Targeting Inhibitor I
Recon Probe Launcher I, Snoop Scanner Probe I Covert Ops Cloaking Device II Small Unstable Power Fluctuator I Medium Unstable Power Fluctuator I
Trimark Armor Pump I Trimark Armor Pump I
Hammerhead II x5 Valkyrie II x5 Hornet EC-300 x5 Warrior II x5
After Patch i'm thinking of droping the web for a cap recharger and with a 3% PG implant instead of the CPU use something like this:
[Pilgrim, probing] 1600mm Reinforced Rolled Tungsten Plates I Internal Force Field Array I Medium Automated I Carapace Restoration Centii C-Type Adaptive Nano Plating Centii C-Type Adaptive Nano Plating
10MN Afterburner II Medium Electrochemical Capacitor Booster I, Cap Booster 800 Faint Warp Prohibitor I Eutectic I Capacitor Charge Array Balmer Series Targeting Inhibitor I
Recon Probe Launcher I, Snoop Scanner Probe I Covert Ops Cloaking Device II Medium Unstable Power Fluctuator I Medium Unstable Power Fluctuator I
Trimark Armor Pump I Trimark Armor Pump I
Hammerhead II x5 Valkyrie II x5 Hornet EC-300 x5 Warrior II x5
Havent been on SISI so not sure if it will work
it's possible to change the faction (although not that expensive) for T2/best named and still use the first fit, if you really want to keep it cheap, use some egress rigs instead of trimarks (also has the speed advantage, maybe better) or some probing rigs
ps: I lack flying time with this ship so i cant really say it's a tested and good fit
I like my steaks bloody as hell |
Deva Blackfire
D00M.
|
Posted - 2008.11.05 12:18:00 -
[8]
Originally by: Gneeznow this works with recon 4, its pricey, and not very effective though it'll take like 400 seconds for a scan
Adaptive Nano Plating II Adaptive Nano Plating II Adaptive Nano Plating II Dread Guristas Co-Processor 1600mm Reinforced Rolled Tungsten Plates I
Faint Warp Prohibitor I X5 Prototype I Engine Enervator Medium Electrochemical Capacitor Booster I, Cap Booster 800 Balmer Series Targeting Inhibitor I Industrial Capacitor Recharger
Covert Ops Cloaking Device II Scan Probe Launcher I, Snoop Scanner Probe I 50W Infectious Power System Malfunction 50W Infectious Power System Malfunction
Egress Port Maximizer I Gravity Capacitor Upgrade I
Hammerhead II x5
Lol
Change that "scan probe launcher" to "recon probe launcher". Scan is used 99% of the time for exploration (1% for scanning ships in mission spots with exploration probes). For fast scanning of ships (snoops, spooks, fathoms, ferrets) you should use recon one giving you time between 60 and 120 seconds.
|
Chimii Lecto
Gallente
|
Posted - 2008.11.05 12:30:00 -
[9]
Edited by: Chimii Lecto on 05/11/2008 12:35:39 Edit: Beatenby deva =( ---------- /Pretty Posting. |
|
|
|
Pages: [1] :: one page |
First page | Previous page | Next page | Last page |