| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |

Teraformer
|
Posted - 2009.09.16 19:32:00 -
[1]
Edited by: Teraformer on 16/09/2009 19:32:45 here is the setup i been working on, i base this setup on vid shown here: zealot C3 solo
its possible to change the anti-em rig to somthing else
any thoughts?
[Zealot, Solo C3 WH fit] Capacitor Power Relay II Heat Sink II Medium Armor Repairer II Medium Armor Repairer II Amarr Navy Energized Thermic Membrane Amarr Navy Energized Adaptive Nano Membrane Amarr Navy Energized Adaptive Nano Membrane
Cap Recharger II Large Capacitor Battery II 10MN Afterburner II
Focused Medium Pulse Laser II, Multifrequency M Focused Medium Pulse Laser II, Multifrequency M Focused Medium Pulse Laser II, Multifrequency M Focused Medium Pulse Laser II, Multifrequency M Focused Medium Pulse Laser II, Multifrequency M
Medium Capacitor Control Circuit I Medium Anti-EM Pump I
|

Spectre Wraith
|
Posted - 2009.09.16 20:09:00 -
[2]
You really want a mix of buffer and resists. You're going to get nailed pretty hard when a new wave spawns every time. Keep in mind he's using an 800 on his and dips into structure. I can't really see the usefulness of having 2 mar's with no plate and no dcu. When a new wave spawns you run the risk of popping if they spawn right after both mar cycle if they're not staggered, the alpha will eat through your nonplated armor and melt through the 0 resist hull.
|

Teraformer
|
Posted - 2009.09.16 20:38:00 -
[3]
u got a point there, i changed the setup abit..
|

Spectre Wraith
Darwin Inc.
|
Posted - 2009.09.16 20:52:00 -
[4]
Edited by: Spectre Wraith on 16/09/2009 20:53:49 Yeah that's better. I came up with something like...
[Zealot, New Setup 1] 800mm Reinforced Rolled Tungsten Plates I Heat Sink II Amarr Navy Energized Adaptive Nano Membrane Amarr Navy Energized Thermic Membrane Damage Control II Medium Armor Repairer II Medium Armor Repairer II
10MN Afterburner II Cap Recharger II Large Peroxide I Capacitor Power Cell
Focused Medium Pulse Laser II, Multifrequency M Focused Medium Pulse Laser II, Multifrequency M Focused Medium Pulse Laser II, Multifrequency M Focused Medium Pulse Laser II, Multifrequency M Focused Medium Pulse Laser II, Multifrequency M
Capacitor Control Circuit II Capacitor Control Circuit II
I'm sure I could go without the second CCCII, but I just put it in there for sake of comparison. This one is probably more expensive, and soemthing else you may want to take into consideration would be system bonii. I checked and the system that zealot was in had no bonus. You could play off the systems with recharge bonus or bonus to cap amount as well that would make these even easier to fit.
I also have a really bad habit of wanting to always use heavy pulse, so Id prefer to drop a CCC for an ACR, or tbqh forgo the second MAR for more resists which is what I normally do.
|

Spectre Wraith
Darwin Inc.
|
Posted - 2009.09.16 21:01:00 -
[5]
Edited by: Spectre Wraith on 16/09/2009 21:06:11 Edited by: Spectre Wraith on 16/09/2009 21:01:48 And also, this is better.
Legion
Except you can go with a more offensive setup rather then an all-in-one setup he's using.
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |