| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
LHA Tarawa
   |
Posted - 2009.12.07 13:25:00 -
[1]
I have my POS up and running and doing lots of ME and PE research. Everything seems to be working fine with those.
However, I can't figure out the copy. Where do the copies go? They aren't in any of the corporate hanger divisons, not in my personal items, not in the lab's storage.
Help. Where do the copies go when the job is delivered? How do I get them?
|
Chance Lightfoot
|
Posted - 2009.12.07 13:39:00 -
[2]
umm, when you set the job up, during the process you should see "input and output" hangers. Copy jobs will always be delivered into the Lab at your POS. Normally when you set the job up the input and output hanger are the same. To that end i would check the Lab hanger which corresponds to the hanger where you have your BPo (i take it you use scientific networking and not have the BPo in the POS lab).
|
LHA Tarawa
|
Posted - 2009.12.07 14:56:00 -
[3]
Yes, I'm using scientific networking. Usually from multi jumps away.
The BPOs are in the corp hanger in the same solar system. I had the input and output both set div1 of the corp hanger. The copies are not going there.
So, I have to change the output to be the lab, or the copies go "nowhere"?
|
LHA Tarawa
|
Posted - 2009.12.07 15:04:00 -
[4]
Still confused. The output just lets me pick the division, not installation. So, are they supposed to be going to the lab's storage? They aren't there.
|
Gavin DeVries
|
Posted - 2009.12.07 15:56:00 -
[5]
They are. For some reason though, at least for me, the copies wind up in a different tab. That might be because, at least for copying, I can't be arsed to select an output slot. I just click through. Still, I fly out to the lab, open it up, and flip from hangar tab to tab until I find them.
The lab storage has the same tabs as your corp hangar does.
______________________________________________________
Isn't it enough to know that I ruined a pony making a gift for you? |
LHA Tarawa
|
Posted - 2009.12.07 16:38:00 -
[6]
Is lab hanger the same as lab storage? I've checked every stinkin' tab in the storage. No copies.
|
Tyranus vonCarstein
Caldari
Eternal Night Industries
|
Posted - 2009.12.07 17:10:00 -
[7]
My suggestion would be to ensure that your lab cargo is really at 0.0m3 (upper right corner). When flipping thru tab to tab it sometimes takes awhile to load the contents of a given tab, you may be clicking thru to fast.
|
LHA Tarawa
|
Posted - 2009.12.07 17:16:00 -
[8]
Thanks Tyranus, I'll give that a try.
A co-worker of mine that reqruited me to thegame said perhaps they go to pending deliveries. He says that corp manufacturing jobs do go to pending deliveries even after you complete the job.
For the copy jobs, I'm just searching for the jobs on the base jobs page, and delivering them. The BPO comes back.
I'll check the pending deliveries tab tonight to see if that is where my copies are.
Thanks for all the help.
|
Ruziel
Minmatar
Twilight Military Industrial Complex
|
Posted - 2009.12.07 17:38:00 -
[9]
Copies do not go in some pending deliveries tab. When you deliver the jobs, the copies end up in whichever output division you had selected of the lab they were copied in. You must physically go to the lab that the copy job was run on to pick them up.
|
Tau Cabalander
Caldari
|
Posted - 2009.12.07 18:15:00 -
[10]
 Originally by: LHA Tarawa
Is lab hanger the same as lab storage? I've checked every stinkin' tab in the storage. No copies.
Click on the actual lab at the POS. Click on access storage. SLOWLY click through the 7 tabs.
|
Letrange
Minmatar
Chaosstorm Corporation
Apoapsis Multiversal Consortium
|
Posted - 2009.12.07 19:37:00 -
[11]
They show up in the lab itself. If your BPOs were in tab 3 in the station and you use the default settigns on the copy job, the BPCs will show up in that tab. In case you're wondering for those copy jobs that take NPC goods the goods also need to be in the lab BEFORE you start the job. If you've done a lot of low run copies you may also have filled up the hangar (remember there's a limit of about 1000 items on any container (including hangars) so make sure to take that into account. BPO/Cs are one of the things that load slowly at POS's (much more slow than at stations - I blame the recent DB changes).
|
LHA Tarawa
|
Posted - 2009.12.08 02:03:00 -
[12]
Okay, they were at the lab. I just didn't give enough time for them to show up in the tabs.
Thanks everyone.
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |