| Pages: [1] :: one page |
|
|
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Rex Murto
   |
Posted - 2010.01.05 12:57:00 -
[1]
Hi, i have just bought myself a cheetah - having never done any exploration before i would like some advice on how to fit it.
I will be using it to find WHs/combat sites/other ships in low sec and high sec...
I have no need to fit a cyno.
If you could give me a couple of fits that would be great (PVE and PVP)
//Rex
|
Hendrik Tiberius
Light Years Ahead
Alternative Realities
|
Posted - 2010.01.05 13:55:00 -
[2]
Edited by: Hendrik Tiberius on 05/01/2010 13:55:54
Hello,
this is my setup for exploration only:
[Cheetah, exploration]
Nanofiber Internal Structure II
Co-Processor II
Micro Auxiliary Power Core I
1MN MicroWarpdrive II
Small Shield Extender II
Cap Recharger II
Cap Recharger II
Expanded Probe Launcher I, Sisters Core Scanner Probe I
Salvager I
Covert Ops Cloaking Device II
Small Gravity Capacitor Upgrade I
Small Gravity Capacitor Upgrade I
The MWD can permarun as long as you dont salvage while you do it ;)
this is the pvp fit I use, found it on the forums somewhere dont remember who posted it:
[Cheetah, Wtf? Tackled by a Cheeta?!]
Micro Auxiliary Power Core I
Micro Auxiliary Power Core I
Nanofiber Internal Structure II
True Sansha Warp Disruptor
Medium F-S9 Regolith Shield Induction
Supplemental Thermal Barrier Emitter
1MN Afterburner II
[empty high slot]
Covert Ops Cloaking Device II
Expanded Probe Launcher I, Core Scanner Probe I
Small Anti-Explosive Screen Reinforcer I
Small Anti-Explosive Screen Reinforcer I
The resist mods/rigs are there to tank Warrior II drones until your fleet arrives.
|
Moon Penguin
Minmatar
Morgal and Ketchum Mining Guild
|
Posted - 2010.01.05 14:10:00 -
[3]
[Cheetah, pve]
Co-Processor II
Nanofiber Internal Structure II
Nanofiber Internal Structure II
1MN Afterburner II
Codebreaker I
Analyzer I
Small Shield Booster II
Covert Ops Cloaking Device II
Salvager I
Expanded Probe Launcher I, Core Scanner Probe I
Small Gravity Capacitor Upgrade I
Small Gravity Capacitor Upgrade I
This is with a PG2 implant for extra powergrid. You have to keep either the Analyzer or Codebreaker offlined in order to fit everything, but they are available to online when you need them. This is purely a PVE/exploration fit, though I have used it successfully as a recon boat in a pinch.
I'm pretty sure if you fit a PG4 implant, you can keep it all online without having to swap modules.
Please re-size your signature to the maximum allowed file size of 24000 bytes. Zymurgist |
Rex Murto
|
Posted - 2010.01.06 16:29:00 -
[4]
 Originally by: Moon Penguin
[Cheetah, pve]
Co-Processor II
Nanofiber Internal Structure II
Nanofiber Internal Structure II
1MN Afterburner II
Codebreaker I
Analyzer I
Small Shield Booster II
Covert Ops Cloaking Device II
Salvager I
Expanded Probe Launcher I, Core Scanner Probe I
Small Gravity Capacitor Upgrade I
Small Gravity Capacitor Upgrade I
This is with a PG2 implant for extra powergrid. You have to keep either the Analyzer or Codebreaker offlined in order to fit everything, but they are available to online when you need them. This is purely a PVE/exploration fit, though I have used it successfully as a recon boat in a pinch.
I'm pretty sure if you fit a PG4 implant, you can keep it all online without having to swap modules.
thanks for the reply - I have had a look on eft and If I swap one of the Gravity Capacitor Upgrades for a Ancillary Current Router I I can fit it all with no need to offline any modules or without the need for implants.... would i miss the extra 10% sensor strength? (if i use a t2 Gravity Capacitor Upgrade i will get 15% extra)
basically it will look like this....
[Cheetah, New Setup 1]
Co-Processor II
Nanofiber Internal Structure II
Nanofiber Internal Structure II
Codebreaker I
Analyzer I
1MN Afterburner II
Small Shield Booster II
Expanded Probe Launcher I, Sisters Core Scanner Probe I
Salvager I
Covert Ops Cloaking Device II
Gravity Capacitor Upgrade II
Ancillary Current Router I
//rex
|
Alt Tabbed
|
Posted - 2010.01.06 21:14:00 -
[5]
Originally by: Rex Murto
Originally by: Moon Penguin
[Cheetah, pve]
Co-Processor II
Nanofiber Internal Structure II
Nanofiber Internal Structure II
1MN Afterburner II
Codebreaker I
Analyzer I
Small Shield Booster II
Covert Ops Cloaking Device II
Salvager I
Expanded Probe Launcher I, Core Scanner Probe I
Small Gravity Capacitor Upgrade I
Small Gravity Capacitor Upgrade I
This is with a PG2 implant for extra powergrid. You have to keep either the Analyzer or Codebreaker offlined in order to fit everything, but they are available to online when you need them. This is purely a PVE/exploration fit, though I have used it successfully as a recon boat in a pinch.
I'm pretty sure if you fit a PG4 implant, you can keep it all online without having to swap modules.
thanks for the reply - I have had a look on eft and If I swap one of the Gravity Capacitor Upgrades for a Ancillary Current Router I I can fit it all with no need to offline any modules or without the need for implants.... would i miss the extra 10% sensor strength? (if i use a t2 Gravity Capacitor Upgrade i will get 15% extra)
basically it will look like this....
[Cheetah, New Setup 1]
Co-Processor II
Nanofiber Internal Structure II
Nanofiber Internal Structure II
Codebreaker I
Analyzer I
1MN Afterburner II
Small Shield Booster II
Expanded Probe Launcher I, Sisters Core Scanner Probe I
Salvager I
Covert Ops Cloaking Device II
Gravity Capacitor Upgrade II
Ancillary Current Router I
//rex
If you've never done in Exploration before I's start with 2 Grav rigs and ignore trying to "fit" everything else.
Once you have a good handle on what you're doing and whether or not you even want to do it...then you can monkey with getting all your mods onlined.
|
|
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |