| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Tau Cabalander
Caldari
   |
Posted - 2010.01.07 07:43:00 -
[1]
Edited by: Tau Cabalander on 07/01/2010 07:43:56
* Remove all cap modules and rigs.
* Fit a Cap booster and use 800 charges (buy the BPO and make them from reprocessed mission loot).
* Shield boost amplifiers only work when boosting. Replace with 4x hardeners.
|
Tau Cabalander
Caldari
|
Posted - 2010.01.08 03:48:00 -
[2]
 Originally by: yani dumyat
Another point on the cap boosters, a medium cap booster with 800's is a damn sight easier to fit than a heavy and as long as you start it running fairly early gives exactly the same end result.
Yes I know a heavy can inject cap charges faster due to less reloading but they both have the same limit, eg the cap charges in your hold.
I started with the T1 Meta 4 Heavy actually. It holds 4x 800 charges. The T2 Heavy is nice since it holds 5 charges. The rate of injection isn't as important as the capacity in my opinion; a single 800 charge is enough for 2 shield boost cycles.
|
Tau Cabalander
Caldari
|
Posted - 2010.01.08 18:48:00 -
[3]
Originally by: Dandrenn
I think i know what it might have been now. I did a mission in a drake just now and started realizing how the mission i did had different groups you can aggro separately. What i did in the past was just right click on a ship i wanted to destroy in the overview without looking at the groups, and i'm sure this is what got me into trouble.
Yes, that will do it. I used to do the same in my Drake.
You will find that your Drake has a LOT more tank than a low skill Raven does. A Raven gets a lot of its tank from increased DPS.
|
Tau Cabalander
Caldari
|
Posted - 2010.01.11 02:33:00 -
[4]
Originally by: Dandrenn
Yeah i read that site, eve survival on each mission and it tells me that one group won't aggro the other. I attack a few guys from that group and then they aggro the other 2 groups. Pretty soon i have 3 groups on me and the shield /cap is melting. The drake has ran these missions slower but without any issues whatsoever with any aggro.
Fire on one (1) ship in a group. See what targets you back; you are free to destroy those ships without getting another unlinked group.
EVE-Survival has not steered me wrong. Ever.
|
Tau Cabalander
Caldari
|
Posted - 2010.01.11 16:29:00 -
[5]
Edited by: Tau Cabalander on 11/01/2010 16:32:03
Originally by: Dandrenn
how do you set your drones to passive for these types of missions
Right-click the small white triangle on the drone window, select Drone Settings, then select Passive.
I recommend mapping shortcuts for drone control. These are the ones I use:
* ALT E = Engage
* ALT R = Return and orbit
* ALT B = Return to drone bay
|
| |
|