| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Ravion Magnus
Minmatar
   |
Posted - 2010.01.27 08:50:00 -
[1]
I've searched the forums but couldn't really find a straight answer:
If I want to reprocess modules at a 50% station, what skills will I need to get 100% out of it?
Refining V, Refining Efficiency V ,Scrapmetal ???
What about at a 35% station ?
|
Amateratsu
Caldari
The Pegasus Project
|
Posted - 2010.01.27 09:07:00 -
[2]
Edited by: Amateratsu on 27/01/2010 09:07:14
I'm not sure if you can get 100% from a 35% station, but the skills you mentioned are what you need.
Each level of scrapmetal processing will reduce the amount of waste you get from reprocessing modules/ships ect.
You may need lv5 to get the best results from a 35% station, but lv4 should get you 100% from a 50% station.
á
|
Yarinor
Aliastra
|
Posted - 2010.01.27 09:07:00 -
[3]
at 50% you need scrap metal 1 OR a refining yield implant (can't remember which one it is). I am not sure about the 35% station.
|
Ravion Magnus
Minmatar
|
Posted - 2010.01.27 09:09:00 -
[4]
thanks a lot for the prompt replies!
|
Mugster
|
Posted - 2010.01.27 11:51:00 -
[5]
ref/ref eff 5 +1% implant gives you 99.99% yield at a 50% station
so with a 2% implant or scrapmetal proc 1 you get 100%
|
My Postman
|
Posted - 2010.01.27 12:47:00 -
[6]
I can¦t verify previous answers. To my knowledge, and in terms this has not changed lately, numbers are:
50% Station (most NPC¦s):
Refining 5, Reffinery Efficiency 3, Scrapm. Processing 2 gives 100,8% yield.
35 % Station:
All above mentioned skills at 5 gives you 96,9 % yield, and the Hardwiring Zainou "Beancounter" H60 Implant in your Head, giving you 4%, drives you over the 100% mark.
|
ddooxx
|
Posted - 2010.01.27 21:43:00 -
[7]
The Mining Guide 3.2 has a nice section on refining.
Note that unlike skills like Veldspar Processing, Scrapmetal processing requires RE5 which requires R5 so the R5/RE4 option is not available for scrapmetal.
Whine: after all this training to reduce waste, you still have to grind corporate standing to 6.67 to eliminate that 5% tax.
|
Tau Cabalander
Caldari
|
Posted - 2010.01.28 01:23:00 -
[8]
 Originally by: Ravion Magnus
I've searched the forums but couldn't really find a straight answer:
If I want to reprocess modules at a 50% station, what skills will I need to get 100% out of it?
Refining V, Refining Efficiency V ,Scrapmetal ???
What about at a 35% station ?
This is the base formula. I believe it is in Halada's mining guide and other places:
yield = <facilities base> + <reprocessing base> * (1 + <Refining Skill Level> * 0.02) * (1 + <Refinery Efficiency Skill Level> * 0.04) * (1 + <Material Processing Skill Level> * 0.05) * (1 + Implant Bonus)
Reprocessing base is always 0.375 at everything but POS.
At 50% station:
* Refining 5
* Refinery Efficiency 5
* Scrap Metal Processing 1 _OR_ Implant Slot 8: Hardwiring - Zainou 'Beancounter' H50 (2% refining - allows you to refine ANYTHING without material specific skill, not just scrap)
At 35% station the best you can do is 99.96% with maxed skills and implant:
* Refining 5
* Refinery Efficiency 5
* Scrap Metal Processing 5
* Hardwiring - Zainou 'Beancounter' H60 (4% refining)
At 35% station the best you can do is 97.37% with Scrapmetal 4 and implant:
* Refining 5
* Refinery Efficiency 5
* Scrap Metal Processing 4
* Hardwiring - Zainou 'Beancounter' H60 (4% refining)
|
My Postman
|
Posted - 2010.01.28 14:13:00 -
[9]
Originally by: ddooxx
The Mining Guide 3.2 has a nice section on refining.
Note that unlike skills like Veldspar Processing, Scrapmetal processing requires RE5 which requires R5 so the R5/RE4 option is not available for scrapmetal.
Whine: after all this training to reduce waste, you still have to grind corporate standing to 6.67 to eliminate that 5% tax.
Did not look at the prereqs, sorry!
@Tau
I see that the numbers you have changed slightly to the ones i¦m having in my spreadsheets. I see i have to check the updated halada¦s once more.
Maybe coming from that i¦m refining in a 50 % station, and that only ore, where reaching 100 is easy.
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |