| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Nrazza
   |
Posted - 2011.04.18 02:33:00 -
[1]
I'm just messing around with Manufacturing and figured i would make some bombs. Concussion Bombs i got a BPC with 300 runs. I got over the amount of mats needed i'm in a station with free slots. I Pick my assembly line and it says i'm missing mats.
I'm only doing 1 run.
Example Trit it says required 1403572 and then it says missing 165624
But i have over 1.6m trit in the hanger. It does this for all the mats. I have Industry lvl 2.
Whats going on?  |
Brock Nelson
Caldari
T2 Technologies Unlimited
SRS.
|
Posted - 2011.04.18 02:40:00 -
[2]
1. Are you sure you got the right hangar
2. Are you sure you got the right skill set to ensure that there is no waste? Production Efficiency V is what you would want to ensure no wastage.
Investor Relation | IPO Doc | BSACSE Listing |
Akita T
Caldari Navy Volunteer Task Force
|
Posted - 2011.04.18 02:42:00 -
[3]
Most of the materials on bombs is "extra" material, so not affected by any waste adjustment factors (skills, implants, blueprint ME level) and not recoverable when reprocessing.
_
Make ISK||Build||React||1k papercuts
|
Nrazza
|
Posted - 2011.04.18 02:43:00 -
[4]
Is there more then 1 hanger? I'm just inside of a normal station with my mats. If it gives a require number doesn't that take into account my skills?
where is the waste factor? does the use of the assembly be based on my standing?
|
Brock Nelson
Caldari
T2 Technologies Unlimited
SRS.
|
Posted - 2011.04.18 02:44:00 -
[5]
What is the ME level of the bpc?
Investor Relation | IPO Doc | BSACSE Listing |
Nrazza
|
Posted - 2011.04.18 02:46:00 -
[6]
 Originally by: Brock Nelson
What is the ME level of the bpc?
I don't see a ME level
but there is a Material Level, and its 512 with waste factor of 0.01%
|
Nrazza
|
Posted - 2011.04.18 02:55:00 -
[7]
Originally by: Akita T
Edited by: Akita T on 18/04/2011 02:47:08
@Brock : AFAIK, most of the materials on bombs is "extra" material, so not affected by any waste adjustment factors (skills, implants, blueprint ME level) and not recoverable when reprocessing.
Is there something i can be doing wrong?
|
Brock Nelson
Caldari
T2 Technologies Unlimited
SRS.
|
Posted - 2011.04.18 02:55:00 -
[8]
As far as the hangar question goes, are you sure you're trying to start the job from the same hangar? When you start a manufacturing job, a dialog should pop up asking you what is the Input and Output hangar.
If this is a personal job, then this doesn't apply.
I think skill has effect on the blueprint itself, what is your Production Efficiency skill at?
Investor Relation | IPO Doc | BSACSE Listing |
Nrazza
|
Posted - 2011.04.18 03:05:00 -
[9]
Originally by: Brock Nelson
As far as the hangar question goes, are you sure you're trying to start the job from the same hangar? When you start a manufacturing job, a dialog should pop up asking you what is the Input and Output hangar.
If this is a personal job, then this doesn't apply.
I think skill has effect on the blueprint itself, what is your Production Efficiency skill at?
I'm in the same Hanger with the bpc and the mats. Input is Hanger and Output is hanger. The bpc says it needs industry lvl 1 only. I have no PE skill.
|
Akita T
Caldari Navy Volunteer Task Force
|
Posted - 2011.04.18 03:13:00 -
[10]
When in doubt, logout, wipe out cache\machonet subfolder, log back in and try again.
Doubt it will help, but you never know.
_
Make ISK||Build||React||1k papercuts
|
Brock Nelson
Caldari
T2 Technologies Unlimited
SRS.
|
Posted - 2011.04.18 05:45:00 -
[11]
Skill and research does indeed have an effect on blueprint waste for the bomb but unless they're in the wrong hangar, something is wrong.
Try relogging
Try different station
If that doesn't work, petition it.
Investor Relation | IPO Doc | BSACSE Listing |
Eladaris
Amarr
Excessum Industries
|
Posted - 2011.04.18 07:02:00 -
[12]
Edited by: Eladaris on 18/04/2011 07:05:14
Originally by: Nrazza
I'm just messing around with Manufacturing and figured i would make some bombs. Concussion Bombs i got a BPC with 300 runs. I got over the amount of mats needed i'm in a station with free slots. I Pick my assembly line and it says i'm missing mats.
I'm only doing 1 run.
Example Trit it says required 1403572 and then it says missing 165624
But i have over 1.6m trit in the hanger. It does this for all the mats. I have Industry lvl 2.
Originally by: Nrazza
I have no PE skill.
This one's really quite easy.
Originally by: Nrazza
I have no PE skill.
With the BPC ME level and PE of 0... you need 1.7mil'ish Trit for a single run of that BPC. You have 1.6mil'ish. So you are missing 165624.
Simple, really.
Train PE to 2 or 3, and you'll be just fine with your 1.6mil Trit. You MAY not be fine for the other materials, but that's neither here nor there.
|
Richmaint
|
Posted - 2011.04.19 10:09:00 -
[13]
On my first attempt at manufacturing something I also received similar error's. In my case I had selected a manufacturing site that was not in the station that I was in. When the Science & Industry screen is opened and the installations tab is selected, the 3rd column from the left is the range selection. To be absolutely certain that your current station has a manufacturing facility, set the range to Current Station. That way all of the listed sites are in your current station. If you had already done that then I guess you are smarter than me. lol
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |