| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Spartan III
   |
Posted - 2005.12.30 18:26:00 -
[1]
Can someone supply me with a punisher setup for a tournament my corp is going to have?
The rules and setup limitations are as follows.
No warping away(so now scramblers needed)
No EW
Only TL1 Equipment(No named, No T2)
Ganna be 1vs1 fights
Most likely ganna be against mostly Gallente frigates with the exception of 1 or 2 caldari frigs
Tips for setting up other rules for the tourny and any ideas would also be helpfull
********************
Join Public Channel "Christian Public Access" for great fellowship and fun |
R3 1D
|
Posted - 2005.12.30 19:07:00 -
[2]
3x Medium Pulse
1x MWD
1x Webber
1x Small Armour Rep
1x 200mm Plate
1x MAPC
1x Cap Relay/Energized Adaptive Nano
(Yes, my main account is broken)
|
vile56
|
Posted - 2005.12.30 19:42:00 -
[3]
sneak a retribution in
well walk up to her with your pants down and if she runs away it was never meant to be. |
Haniblecter Teg
|
Posted - 2005.12.30 19:52:00 -
[4]
if you feel balzy, go for a Kinetic and Thermal active instead of an energized as outline above.
Assuming you're expecting to face mostly gallente. One+
----------------------------------------
Friends Forever |
Shinnen
|
Posted - 2005.12.30 20:07:00 -
[5]
Edited by: Shinnen on 30/12/2005 20:07:47
You must be able to fit an MWD that you can keep running forever. Then find the perfect orbit range, so u get swung out to your optimal, orbit and make sure the Transversal Velocity exceeds 1000m/s. Then no gallente frig using rails will be able to hit you 
Also, go for the minimal number of guns, web and neuts are what you need most, killing can come later
---
INFOD |
Spartan III
|
Posted - 2005.12.30 23:27:00 -
[6]
Edited by: Spartan III on 30/12/2005 23:30:55
Any tips for setting up the tourny?
[Edit] Thanks for the setups and tactics
********************
Join Public Channel "Christian Public Access" for great fellowship and fun |
Spartan III
|
Posted - 2005.12.30 23:56:00 -
[7]
If I decided not to use a MWD should i use an AB? or since I am fighting frigs will it not really matter?'
What about a tracking Disruptor?
I took EW out of the limitations because when I said that i was really talking about jamming and forgot about the fact that webbers disruptors ect.. were EW.
********************
Join Public Channel "Christian Public Access" for great fellowship and fun |
Spartan III
|
Posted - 2005.12.31 00:23:00 -
[8]
What about this setup?
3x Medium Pulse Laser I
1x 1mn Afterburner
1x Tracking Disruptor
1x Small Armor Repairer I
1x MAPC
1x CPR
1x 200mm Steel Plates I
The tracking Disruptor and the afterburner should work better than a MWD and take much less cap.
********************
Join Public Channel "Christian Public Access" for great fellowship and fun |
vile56
|
Posted - 2005.12.31 19:40:00 -
[9]
 Originally by: Spartan III
What about this setup?
3x Medium Pulse Laser I
1x 1mn Afterburner
1x Tracking Disruptor(u said no disrupting)(id use web)
1x Small Armor Repairer I
1x MAPC
1x CPR
1x 200mm Steel Plates I
The tracking Disruptor and the afterburner should work better than a MWD and take much less cap.
id ****ch the 200 plate for a +14% to all res
well walk up to her with your pants down and if she runs away it was never meant to be. |
Jocelyn Fernos
|
Posted - 2006.01.01 17:25:00 -
[10]
I used this setup in a corp 2v2. We were up against one Condor and one Rifter. My teammate got killed fast and had only done minor damage on one of them. I killed both of them without hitting structure. At the end of the fight i had 12% armor and near to 0 in cap left. :)
This is what i used:
3x Dual Afocal Pulse Maser w/ Multi
1x 1MN Afterburner
1x Stasis Webifier
1x Small Armor Rep
1x Heat Sink
1x 100mm Plate
1x Energized Adaptive Nano Membrane
This setup worked good for me :)
------ |
R3 1D
|
Posted - 2006.01.01 17:39:00 -
[11]
Originally by: vile56
Originally by: Spartan III
What about this setup?
3x Medium Pulse Laser I
1x 1mn Afterburner
1x Tracking Disruptor(u said no disrupting)(id use web)
1x Small Armor Repairer I
1x MAPC
1x CPR
1x 200mm Steel Plates I
The tracking Disruptor and the afterburner should work better than a MWD and take much less cap.
id ****ch the 200 plate for a +14% to all res
Why? The plates give better survivability.
Also, I'd keep a webber if I were you otherwise almost every ship will have speed advantage over you unless of course they don't fit any speedboost mods (possible)
(Yes, my main account is broken)
|
Montero
|
Posted - 2006.01.01 17:45:00 -
[12]
Originally by: Shinnen
Edited by: Shinnen on 30/12/2005 20:07:47
You must be able to fit an MWD that you can keep running forever. Then find the perfect orbit range, so u get swung out to your optimal, orbit and make sure the Transversal Velocity exceeds 1000m/s. Then no gallente frig using rails will be able to hit you
Also, go for the minimal number of guns, web and neuts are what you need most, killing can come later
lies, turn the mwd off in orbit ;)
|
Spartan III
|
Posted - 2006.01.03 19:28:00 -
[13]
Edited by: Spartan III on 03/01/2006 19:31:35
What about a webber and a tracking disruptor?
I don't think I will need ab/mwd if i have webber and tracking disruptor if i can make them go nowhere and hit nothing while my guns hit for full effect, but what do you think?
********************
Join Public Channel "Christian Public Access" for great fellowship and fun |
Spartan III
|
Posted - 2006.01.08 04:27:00 -
[14]
*bumps thread* Oops 
********************
Join Public Channel "Christian Public Access" for great fellowship and fun |
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |