EVE Search - [RMR] Claw Setups

All Channels

Ships and Modules

[RMR] Claw Setups

» Click here to find additional results for this topic using Google

Monitor this thread via RSS [?]

Pages: [1] 2 3 4 :: one page
Author	Thread Statistics \| Show CCP posts - 0 post(s)
Testy Mctest	Posted - 2006.02.08 16:18:00 - [1] Sticky thread needed Claw setups, so, as specifically as possible: 'Classic' Plated Claw 3x 150mm II, Arbalest Rocket Launcher Cold Gas MWD, J5b 20km Scrambler Small Rep II, Cap Relay, 400mm Tungsten Plate, MAPC The Eve Guild Wars Project!
MacDuncan	Posted - 2006.02.08 16:21:00 - [2] Edited by: MacDuncan on 08/02/2006 16:23:42 Edited by: MacDuncan on 08/02/2006 16:22:56 3x 150mm T2, rockets MWD T2, Web SAR T2, Gyro T2, 200mm rolled tungsten, MAPC Edit: 1st think, 2nd type...;) --
Skyblue	Posted - 2006.02.08 16:22:00 - [3] or a magnetic plating
BigJim Beef	Posted - 2006.02.08 16:46:00 - [4] 3x 200mm II 1x Small nos MWD X5 or better web (solo) or 7.5km scram (group/fleet) 1x PDU 1x 200mm rolled tungsten 1x Small armour rep II 1x free slot for whatever, cap relay if needed, speed mod if wanted, hardener etc. Not claiming that setup is any better than an 400mm plate Claw, but it's an alternative.
Famine Aligher'ri	Posted - 2006.02.08 16:51:00 - [5] 3x150 II's 1xRocket II 1xDomination AB 1xShadow Warp Scrambler 1x200mm plate 1xDark Blood Small Armor Rep (90) 1xCentum B-Type Energized Nano (26%) 31.65% 1xCentii A-Type Adaptive Nano (23%) 28.4% EM - 90.22% Explosive - 55.97% Kinetic - 63.31% Thermal - 68.2% Silly eh?
Uther Doull	Posted - 2006.02.08 16:54:00 - [6] Originally by: Testy Mctest Sticky thread needed Claw setups, so, as specifically as possible: 'Classic' Plated Claw 3x 150mm II, Arbalest Rocket Launcher Cold Gas MWD, J5b 20km Scrambler Small Rep II, Cap Relay, 400mm Tungsten Plate, MAPC pretty much my setup --------------------------- My opinions are my own and not nessecarily those of my corp or alliance.
DeadRow	Posted - 2006.02.08 17:02:00 - [7] 3x t2 125s 1x arby rocket 1x MWDII(or nameded) 1x 7.5km scram 1x SARII 1x gyro 1x 200plate 1x cap relay
Mudkest	Posted - 2006.02.08 17:45:00 - [8] Edited by: Mudkest on 08/02/2006 17:46:33 for ratting/missioning 3 150mm t2, limos rocket launcher coldgas ab, cap recharger armor rep, 200mm tungsten plate, 2x energized nano plating I dont pvp so dont know setup for that, i'd probalby swap to a frigate wehn I decide to start that Originally by: Skyblue or a magnetic plating -Would you attack a lion with a brooch-pin? Why would a lion have a brooch-pin?
kris1000	Posted - 2006.02.08 19:07:00 - [9] My new solo Claw setup: 3x 150mm II's 1x Arbalest Rocket Launcher 1x Webifier 1x Scrambler 1x 400mm tungsten 1x Small rep II 1x Gyrostab II 1x Co-proc Maybe u can put in a disruptor if u have a named or t2 co-proc, haven't tried it much yet, but from what i've seen i'm quite satisfied. Guess there also is a little problem with long range ships...
Draeklore	Posted - 2006.02.13 21:53:00 - [10] What about this? 3x 150mm II, Small Nos II Cold Gas MWD, J5b 20km Scrambler Small Rep II, Cap Relay, 400mm Tungsten Plate, MAPC You will get enough cap to MWD should you get webbed once to maintain a good velocity.
Ras Blumin	Posted - 2006.02.14 05:08:00 - [11] Originally by: kris1000 3x 150mm II's 1x Arbalest Rocket Launcher 1x Webifier 1x Scrambler 1x 400mm tungsten 1x Small rep II 1x Gyrostab II 1x Co-proc There must be a way to get around that Co-pro. It's kinda a wasted slot imo. Arty (old afaik); 3 280 2's named mwd, 20k mapc, rep, nano, cap relay My lowsec pirating setup; 2 150 2's, 125 2, knave nos named ab, 7.5k mapc, sar 2, 400mm RT, named EANM I should be able to get the 3rd 150 on it with AWU 5. A dirty job - Released 2006.01.02 -\|- NO BS BS BPCsÖ - 500k/run
Ras Blumin	Posted - 2006.02.14 05:11:00 - [12] Edited by: Ras Blumin on 14/02/2006 05:14:45 Originally by: Draeklore 3x 150mm II, Small Nos II Cold Gas MWD, J5b 20km Scrambler Small Rep II, Cap Relay, 400mm Tungsten Plate, MAPC BPO for small nos 2 hasn't been released yet, and there's not enough grid for the rep+nos. Btw, QuickFit is your friend ;) A dirty job - Released 2006.01.02 -\|- NO BS BS BPCsÖ - 500k/run
Ricardo ilMagnifico	Posted - 2006.02.15 03:04:00 - [13] Edited by: Ricardo ilMagnifico on 15/02/2006 03:09:47 With the claw which gun would do more damage: 200 or 150? I'm wondering how much tracking would help on the smaller guns...I'm really liking the Claw as a damage dealer, been taking out some smaller BS' in 0.0 Just takes a bit of ammo
Famine Aligher'ri	Posted - 2006.02.15 04:08:00 - [14] Originally by: Ricardo ilMagnifico Edited by: Ricardo ilMagnifico on 15/02/2006 03:09:47 With the claw which gun would do more damage: 200 or 150? I'm wondering how much tracking would help on the smaller guns...I'm really liking the Claw as a damage dealer, been taking out some smaller BS' in 0.0 Just takes a bit of ammo It's not really about the damage diffrence but the pg/cpu diffrence. That's why you should fit 150's.
Foulis	Posted - 2006.02.15 04:35:00 - [15] Originally by: Famine Aligher'ri Originally by: Ricardo ilMagnifico Edited by: Ricardo ilMagnifico on 15/02/2006 03:09:47 With the claw which gun would do more damage: 200 or 150? I'm wondering how much tracking would help on the smaller guns...I'm really liking the Claw as a damage dealer, been taking out some smaller BS' in 0.0 Just takes a bit of ammo It's not really about the damage diffrence but the pg/cpu diffrence. That's why you should fit 150's. Also, it has been shown that the 150mms larger clip allows it to do more damage over time, as it reloads less. Along with it's lower requirements and better tracking make it my favourite AC. ---- I like pie. Cake > Pie - Imaran
Zysco	Posted - 2006.02.15 06:00:00 - [16] cap relay on the 150/plate setup makes me go
Ryysa	Posted - 2006.02.15 09:09:00 - [17] 4x 125mm gatling ac II, offline remote rep t2 MWD, 7.5km scrambler 400mm plate, cpr, gyrostab, nanofiber :o All about target jamming
Montolio	Posted - 2006.02.15 11:18:00 - [18] Edited by: Montolio on 15/02/2006 11:19:57 Originally by: Ras Blumin Originally by: kris1000 3x 150mm II's 1x Arbalest Rocket Launcher 1x Webifier 1x Scrambler 1x 400mm tungsten 1x Small rep II 1x Gyrostab II 1x Co-proc There must be a way to get around that Co-pro. It's kinda a wasted slot imo. ... There is. Pre-rmr I used the same setup for High and Med slots, but a cap relay where the co-pro is in the Lows. 3x 150mm II, 1x Malkuth rocket launcher. 1x X5 web, 1x Faint Epsilon scramb (7500m). 1x 400mm tungsten, 1x Small repper II, 1x Gyro II, 1x Cpr. I have Engeneering* lvl5 and Wpn upgrades lvl5, this leaves me with 0,3 Cpu left. QuickFit ftw. * Edit: Not Engeneering, Electronics
Testy Mctest	Posted - 2006.02.15 11:35:00 - [19] Edited by: Testy Mctest on 15/02/2006 11:36:59 Originally by: Zysco cap relay on the 150/plate setup makes me go Getting enough cap back in between larger ship nos cycles to activate modules makes me go Edit: And what would you fit with tiny bit of cpu/grid you have left in that last slot, then? The Eve Guild Wars Project!
Skyblue	Posted - 2006.02.15 12:20:00 - [20] Originally by: Testy Mctest Edited by: Testy Mctest on 15/02/2006 11:36:59 Originally by: Zysco cap relay on the 150/plate setup makes me go Getting enough cap back in between larger ship nos cycles to activate modules makes me go Edit: And what would you fit with tiny bit of cpu/grid you have left in that last slot, then? Kinetic plating, helps when fighting taranises
ArcheryTXS	Posted - 2006.02.23 03:08:00 - [21] Originally by: Testy Mctest Sticky thread needed Claw setups, so, as specifically as possible: 'Classic' Plated Claw 3x 150mm II, Arbalest Rocket Launcher Cold Gas MWD, J5b 20km Scrambler Small Rep II, Cap Relay, 400mm Tungsten Plate, MAPC To do u`r best - put X5 webber instead Scrambler. Lear Rocket Launcher T2 (but still T1 ammo) With webber u even can try to kill assault 1vs1 . / Городская тоска...
OrangeAfroMan	Posted - 2006.02.23 06:38:00 - [22] Edited by: OrangeAfroMan on 23/02/2006 06:43:46 Edited by: OrangeAfroMan on 23/02/2006 06:39:00 What I run, what do you guys think of it? 3x 150mms (fusion) 1x Rockets (gremlin) 1x 7.5km Scrambler (named) 1x Cold-Gas AB 1x Repper 1x 200mm plate (nanofiber) 1x Damage Mod 1x Tracking mod Suggestions very welcome, I would also not mind the discussion of why 400mm plates would be better than 200mms BTW I killed a Crusader easily with this (about 2-3 year old player) One more thing, it really doesnt make a lot of sense to use a MWD nowadays, as you take at least as much if not more damage on approach than with an AB, [and if you both have webs you can leave your AB on, they turn off their MWD, meaning you dictate range. Also if you have no web and they do then you wouldnt be able to catch them with your MWD anyway.] [] = Inty vs Inty fight
Sanguinas	Posted - 2006.02.27 22:42:00 - [23] ok this is what i got and i can take most frigates in it and quite a few cruisers 3x 200mm II autocannons 1x small diminishing or arb rocket launcher 1x x5 proto webber 1x fleeting scram (7.5km) 1x small armor rep II 1x Local Hull COnversion Overdrive injector 1x Alpha Hull mod nanofiber structure 1x gyro II
Sarmaul	Posted - 2006.02.27 22:51:00 - [24] DrunkenOne's plated claw, pieced together from the FIX kb and the last slot guessed at 150mm AC II x 3 Arby RL x 1 Fleeting Web x 1 Faint Epsilon 7.5km scrambler x 1 Small Rep II x 1 400mm rolled tungsten x 1 Magnetic Plating II x 1 Energised Reactive Plating II x 1 (guessed at) You do however need AWU5 for it. If you don't have it, swap the energised plating to a standard one (1pg less).
Sanguinas	Posted - 2006.02.27 23:20:00 - [25] Edited by: Sanguinas on 27/02/2006 23:20:18 Sarmaul that dosnt sound right for his claw if you look at the fraps ive seen the damage window says hes using 200mm autocannons and if you look at his speed when hes approaching his targets its in the 600s my claw setup gets about that speed just some observations
Sarmaul	Posted - 2006.02.27 23:24:00 - [26] Edited by: Sarmaul on 27/02/2006 23:24:26 Originally by: Sanguinas Edited by: Sanguinas on 27/02/2006 23:20:18 Sarmaul that dosnt sound right for his claw if you look at the fraps ive seen the damage window says hes using 200mm autocannons and if you look at his speed when hes approaching his targets its in the 600s my claw setup gets about that speed just some observations the only 2 mails on the kb are this and this, both of which confirm the setup I posted, besides the last slot which is still a mysterly (nano?)
Sanguinas	Posted - 2006.02.27 23:26:00 - [27] ok was just an observation...thanks for setting me strait
Sarmaul	Posted - 2006.02.27 23:36:00 - [28] Originally by: Sanguinas ok was just an observation...thanks for setting me strait sorry :) as a pro-minmatar forum ***** it's my job to know these things
shakaZ XIV	Posted - 2006.02.27 23:47:00 - [29] Originally by: Testy Mctest Sticky thread needed Claw setups, so, as specifically as possible: 'Classic' Plated Claw 3x 150mm II, Arbalest Rocket Launcher Cold Gas MWD, J5b 20km Scrambler Small Rep II, Cap Relay, 400mm Tungsten Plate, MAPC this setup looks w1n, but whats the top speed with the 400mm plate? -shak, who cant fly minmatar frigs >.<
Sarmaul	Posted - 2006.02.27 23:49:00 - [30] with a 400mm rt plate, 3669m/s with the cold gas mwd

Pages: [1] 2 3 4 :: one page
First page \| Previous page \| Next page \| Last page

COPYRIGHT NOTICE
EVE Online, the EVE logo, EVE and all associated logos and designs are the intellectual property of CCP hf. All artwork, screenshots, characters, vehicles, storylines, world facts or other recognizable features of the intellectual property relating to these trademarks are likewise the intellectual property of CCP hf. EVE Online and the EVE logo are the registered trademarks of CCP hf. All rights are reserved worldwide. All other trademarks are the property of their respective owners. CCP hf. has granted permission to EVE-Search.com to use EVE Online and all associated logos and designs for promotional and information purposes on its website but does not endorse, and is not in any way affiliated with, EVE-Search.com. CCP is in no way responsible for the content on or functioning of this website, nor can it be liable for any damage arising from the use of this website.