| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
baraka shogat
   |
Posted - 2006.04.04 12:06:00 -
[1]
im probably bein a bit optimistic here but im tryin to get 4 250mm rails and 2 hvy launchers online in a moa even with a rcu i cant do it any suggestions?
|
SargeMonkey
|
Posted - 2006.04.04 12:11:00 -
[2]
2 RCU.
- - - -
I can't spell, don't tell me I already know.
Spellcheck: |
Shakala
|
Posted - 2006.04.04 12:24:00 -
[3]
Engineering 4 and 2 x RCU.
You're looking to use 1100 grid from a base 780. RCU gives you 10% more. 2 give you 21% more. Eng 4 gives you 20% boost to grid. RCU II obviously better but more expensive.
The real question is whether making your ship this "shooty" is gimping it in other ways. That depends on how it is to be used. You obviously have other modules to fit which will have grid requirements too. If it is being remote tanked or not tanked at all then maybe you have slots to spare.
|
Kery Nysell
|
Posted - 2006.04.04 12:51:00 -
[4]
Hmmm ...
Engineering 5 would raise the power output of the Moa to 975.
Advanced Weapon Upgrades 5 would reduce the power needs of the 250's from 225 to 202.5 (or from 236 to 212.4 for the Tech 2) and the power needs of the heavy launchers from 100 to 90 (105 to 94.5 for Tech 2).
(4*202.5)+(2*90)=990 ... nope, even with maxed skills and T1 mods it's still too short, and even worse with T2 mods.
I would say that you'll need at least a couple of RCU's, and maybe fill your 4 lows with those if you want a bit of shieldtanking in your med slots ...
It depends on what you intend to use that Moa for, but I would use 2 Assault Launchers instead of Heavy Launchers, to deal with the Frigates [since the Moa's dronebay is so painfully small (15m¦, 3 Lights or 1 Light + 1 Medium)], and that would free around 100 points of powergrid (50 base vs 100 base).
|
Voltron
|
Posted - 2006.04.04 12:58:00 -
[5]
If you want powergrid for weapons AND shield tanking DON'T fill your lows with RCUs.......fill them with PDU's. They give powergrid/overal cap/cap recharge/shield hitpoints/shield recharge.
Volt
|
K Shara
|
Posted - 2006.04.04 13:00:00 -
[6]
fit 2 assaults.
<><><><><><><><><>
Contraband
<><><><><><><><><> |
Jarmon Karlentis
|
Posted - 2006.04.04 14:03:00 -
[7]
This is the setup I used to use on my moa.
4x250mm Proto. 2x Arbalest.
1xAb, Med Shield Booster, 2x Hardeners
3xMagStab2, 1xRCU2
You could drop the RCU2 for 3xPDU and 1x Magstab if your skills aren't up there, should fit.
Even so you are gonna need Eng 4 really to fit 4 250mm rails on this ship. Try fitting 200s with more Magstabs, will do the same damage, whilst tracking better, and being much easier to fit.
|
HippoKing
|
Posted - 2006.04.04 14:06:00 -
[8]
either use assaults or 200mms (better off with 200mms i think)
sigs of the 23/24/25 hijack just as well -eris
yarrrr, i shall retake my sig -HippoKing
Not a chance, our 1337 sig haXx0r sk1llz are too powerful! - Wrangler
Ho-Ho-Hooooooo, Merry Saturday!11 - Immy
Yo ho ho and a bottle of BReeEEEEeee.... - Jacques ARRRRRRchambault
Stop spamming with "QFT" >:|. - Teblin
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |