| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
padraig animal
   |
Posted - 2006.04.22 12:19:00 -
[1]
Ok soive got myself a raven and was wandering if you other raven pilots can tell me if the set up is ok.
high
2 x heavy nos
6 x cruise or heavy
med
1 x t2 large shield booster
1 x shield boost amp
1 x t2 shield resist amp for em
2 x t2 inv field hardeners
1 x t2 cap recharger
low
3 x t2 pdu
2 x t2 bcu
if you would change any of it what would you put in the set up and for what thanks.
|
Colonel Lemming
|
Posted - 2006.04.22 12:47:00 -
[2]
You'd be mauled in a Lvl4....
I usually run
Highs:
2x Named Sieges
4x Named Cruise Launchers
Mids:
1x T2 or C-5L XL booster
1x shield boost amp
3x T2 Hardeners (fitting depends on NPC. 2xKin, 1xTherm on Guristas for example)
1x T2 or Best named Cap Recharger
Lows:
3xPDU2
2xBDU2
Together with a bunch of drones with decent drone skills as frigate defense
|
padraig animal
|
Posted - 2006.04.23 17:20:00 -
[3]
 Originally by: padraig animal
Edited by: padraig animal on 22/04/2006 13:20:57
Ok soive got myself a raven and was wandering if you other raven pilots can tell me if the set up is ok.
high
2 x heavy nos
6 x cruise or heavy
med
1 x t2 large shield booster
1 x shield boost amp
3 x t2 inv field hardeners
1 x t2 cap recharger
low
3 x t2 pdu
2 x t2 bcu
if you would change any of it what would you put in the set up and for what thanks.
Ok i was thinking of swapping the 3 inv field hardeners for 3 other hardeners but what types wou;d be best so that i dont have to keep swapping them about OR shouls i stick with the 3 inv fields.I dont suppose anyone knows the rewsists by using 3 inv fields.
|
burning raven
|
Posted - 2006.04.23 17:52:00 -
[4]
EM: 57.11
EXP: 82.84
KIN: 74.27
THERM: 65.69
which isnt good enough imo :D
|
padraig animal
|
Posted - 2006.04.23 18:23:00 -
[5]
Originally by: burning raven
EM: 57.11
EXP: 82.84
KIN: 74.27
THERM: 65.69
which isnt good enough imo :D
OK so what would you people recommend fopr my mid slots thanks.
|
Learesh
|
Posted - 2006.04.23 18:27:00 -
[6]
Edited by: Learesh on 23/04/2006 18:29:19
Quote:
EM: 57.11
EXP: 82.84
KIN: 74.27
THERM: 65.69
which isnt good enough imo :D
good enough for l4 angels....
I get that result with two DG invulna's... didn't have a problem yet, but than again I use pretty hardcore amp anbd xl booster as well...
They are right though tjhree hardeners spcific will do better in this case. I just slap on the DG's because i'm lazy., and two slots is different than three, especilly cap-wise ^^
Right before you wake up in cloning bay you are gonna say my name! |
burning raven
|
Posted - 2006.04.23 18:46:00 -
[7]
when i started doing levels 4 i used.
1 xl-booster
1 boost amp
4 t2 hardners
and i've slowly replaced that with faction gear which has allowed me to drop to 3 t2 hardners, but i play on the safe side so i prefer to over tank than under tank :D
|
padraig animal
|
Posted - 2006.04.23 18:52:00 -
[8]
Thanks for the info guys but what hardeners should i use thanks again.
|
burning raven
|
Posted - 2006.04.23 19:10:00 -
[9]
http://npc.elfarto.com/ check that for rat dmg types, then fit accordingly
typically i would use 2 kin / 2therm for guristas for example :p
|
Shadarle
|
Posted - 2006.04.23 20:04:00 -
[10]
If you're too lazy to switch out resists per dmg type then you're too lazy to do lvl 4's imo. You better be able to do lvl 3's in your sleep if you wanna try 4's.
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |