EVE Search - [Help] Adobe premiere/After effects text effects

Check My IP Information

All Channels

My EVE

[Help] Adobe premiere/After effects text effects

» Click here to find additional results for this topic using Google

Monitor this thread via RSS [?]

Pages: [1] :: one page

Author	Thread Statistics \| Show CCP posts - 0 post(s)
Aberash Viper Squad Triumvirate.	Posted - 2007.08.13 21:26:00 - [1] This If you would watch the first few seconds of this video there is an effect were there is like a flash of light that starts at a point and flashes out.. anyways i would like to recreate this effect for the start of my next video, so text would be in the centre of the screen(name of the video) and the light comes from behind and does atleast sort of like what it does in that video, i remember effects like this(were light shines through the letters) in older videos, and i suspect these effects can be made with after effects. so itd be appreciated someone perhaps directing me to a guide or instructing me how to create these effects Thx, Abe VID:[IXC] House of Prawn II
Crimson Onyx Katana's Edge	Posted - 2007.08.13 21:47:00 - [2] Maybe it was a lens flare not too sure but looks cool. .:The Edge Preview :.
AlleyKat White-Noise Corelum Syndicate	Posted - 2007.08.13 23:21:00 - [3] You mean like this?, Yeah, you need After Effects to be honest. No links on how to do it, because it's just a case of selecting the layer behind the text and you go effect=>generate=>lens flare. Then just keyframe it out - takes a few minutes. Oh, I used a font called 'viper squad' for your name btw, thought it was a nice touch AK
Greme Amarr Slacker Industries Exuro Mortis	Posted - 2007.08.14 11:29:00 - [4] Your best bet for something like that is to use after effects, a custom white shape as a layer, and use Trapcode Shine on said shape (by the looks of that, cranking up the boost light as you go along).
Greme Amarr Slacker Industries Exuro Mortis	Posted - 2007.08.14 11:29:00 - [5] Your best bet for something like that is to use after effects, a custom white shape as a layer, and use Trapcode Shine on said shape (by the looks of that, cranking up the boost light as you go along).
AlleyKat White-Noise Corelum Syndicate	Posted - 2007.08.14 20:10:00 - [6] Maybe this one is more like it, as Greme suggested... AK.
dabster Minmatar Brutor tribe	Posted - 2007.08.15 11:58:00 - [7] Originally by: AlleyKat You mean like this?, Yeah, you need After Effects to be honest. No links on how to do it, because it's just a case of selecting the layer behind the text and you go effect=>generate=>lens flare. Then just keyframe it out - takes a few minutes. Oh, I used a font called 'viper squad' for your name btw, thought it was a nice touch AK That one should be fairly easy to do in Premiere..video effect > render > lens flare ___________________________ Trust In Rust!
AlleyKat White-Noise Corelum Syndicate	Posted - 2007.08.15 12:08:00 - [8] Originally by: dabster That one should be fairly easy to do in Premiere..video effect > render > lens flare Yeah, but the lens flare in Premiere is pretty weak. The one in After Effects just oozes quality, and you have much better manipulation over it too.
Aberash Viper Squad Triumvirate.	Posted - 2007.08.15 13:46:00 - [9] Edited by: Aberash on 15/08/2007 13:46:51 Originally by: AlleyKat Maybe this one is more like it, as Greme suggested... AK. <<Thats what i wanted If you can just write a few steps of what to do in after effects would be good .:VID:[IXC] House of Prawn II:.
Greme Amarr Slacker Industries Exuro Mortis	Posted - 2007.08.15 15:48:00 - [10] I don't have After Effects with me at the moment, so can't really guide on what to do (other than saying, load after effects, create some text as a layer (text tool), get trapcode shine plugin, enable the effect on the text layer (effects -> Trapcode -> Trapcode shine), and then mess with the settings). The trapcode website itself has pretty good introductory tutorials showing the basics of shine. http://www.trapcode.com/support.html If no one has told you anything by next monday (when I get back home), give me a message in eve, and I'll help you out

AlleyKat White-Noise Corelum Syndicate	Posted - 2007.08.15 18:48:00 - [11] Originally by: Aberash <<Thats what i wanted If you can just write a few steps of what to do in after effects would be good No problem: To do the following, you need After Effects 7.0 Pro (or Adobe Production Studio CS2) and Trapcode's plugin 'Shine'. 1) Create a new composition, settings as required. 2) Take your text tool and click in the composition window to create text layer, font size etc as required. 3) With the text selected go Effect>Trapcode>Shine, and then Effect>Stylize>glow 4) Goto time/frame Zero on your timeline window and allow the keyframes to be the following Settings 5) Goto the end of your timeline, or move to the required duration and use these Settings 6) Goto a few frames in from Zero and set a keyframe for the shine opacity to 100%. Depending on the size of the composition, you may wish to increase the boost light and ray length keyframes. 7) Render. Once this is setup, save the project and should you wish to change the text, just highlight it with the text tool and over-type it - all of the settings above will still apply themselves to the text. As always Aberash, please tell me once you have DL'd these files and I'll remove them from Eve-files - remember to thank Chribba AK.
Aberash Viper Squad Triumvirate.	Posted - 2007.08.18 15:58:00 - [12] Was just testing to see if i could actually import a after effects compilation into premiere and it says "Adobe Dynamic Link requires the Adobe Production Studio" .:VID:[IXC] House of Prawn II:.
Greme Amarr Slacker Industries Exuro Mortis	Posted - 2007.08.18 16:35:00 - [13] Which version are you using? CS3 or AE7?
AlleyKat White-Noise	Posted - 2007.08.18 16:57:00 - [14] Originally by: Aberash Was just testing to see if i could actually import a after effects compilation into premiere and it says "Adobe Dynamic Link requires the Adobe Production Studio" Yeah, you can't unless you have Production Studio. You can do it the other way around though, and import your prem project into AE. If you do all your editing and just leave blanks in the premiere project timeline for title work and import it into AE, you'll be fine. When done, render it out in AE uncompressed and use DS's Encoder or whatever, for the final run. AK.
Greme Amarr Slacker Industries Exuro Mortis	Posted - 2007.08.18 18:26:00 - [15] I was told that Prem/AE CS3 can seamlessly integrate without the need for the production package. Bastards must have lied to me :(
AlleyKat White-Noise	Posted - 2007.08.18 19:57:00 - [16] Originally by: Greme I was told that Prem/AE CS3 can seamlessly integrate without the need for the production package. Bastards must have lied to me :( I don't have CS3...yet :-)
Aberash Viper Squad Triumvirate.	Posted - 2007.08.19 13:20:00 - [17] Edited by: Aberash on 19/08/2007 13:21:30 yeah i could just import into after effects (7.0 btw) and render there, but last time i tried that it made like an 80gb file and filled up the hard drive i was using Alley is there any chance u could just change the Font+text u used for the one u used and upload the avi file of it then i could just slot that in, if youd be so kind This Font In like white or red, whichever looks better .. it needs to be 4.22seconds Only if u have the chance and dont mind doing it however, would appreciate it oh and the writing needs to be : NECROSIS (all upper case) .. i would offer isk but im skint as hell Youll get a mention in the movie and when ive some spare cash ill send you some .:VID:[IXC] House of Prawn II:.
AlleyKat White-Noise Exuro Mortis	Posted - 2007.08.19 15:02:00 - [18] On it - uploading now for you.
Aberash Viper Squad Triumvirate.	Posted - 2007.08.19 17:59:00 - [19] hmm that file doesnt play in media players or upload into premiere, says unsupported or damage file, yet its avi .:VID:[IXC] House of Prawn II:.
AlleyKat White-Noise Exuro Mortis	Posted - 2007.08.19 19:33:00 - [20] Originally by: Aberash Edited by: Aberash on 19/08/2007 18:05:15 nvm it wouldnt play but realised u said i need lagarith lossless codec codec link

Aberash Viper Squad Triumvirate.	Posted - 2007.08.20 19:18:00 - [21] yeah i got it, thought id already commented but realise i havnt, works great mate and it will be used at the start of my next video, youll have to wait and see . Thanks again mate .:VID:[IXC] House of Prawn II:.
AlleyKat White-Noise Exuro Mortis	Posted - 2007.08.20 19:38:00 - [22] Originally by: Aberash yeah i got it, thought id already commented but realise i havnt, works great mate and it will be used at the start of my next video, you'll have to wait and see . Thanks again mate Happy to help. Remember, if you need some flashy title work done - I'd feel better about emailing you the project file, so you can export it anyway you want. Looking forward to the vid, AK.


Pages: [1] :: one page
First page \| Previous page \| Next page \| Last page

COPYRIGHT NOTICE
EVE Online, the EVE logo, EVE and all associated logos and designs are the intellectual property of CCP hf. All artwork, screenshots, characters, vehicles, storylines, world facts or other recognizable features of the intellectual property relating to these trademarks are likewise the intellectual property of CCP hf. EVE Online and the EVE logo are the registered trademarks of CCP hf. All rights are reserved worldwide. All other trademarks are the property of their respective owners. CCP hf. has granted permission to EVE-Search.com to use EVE Online and all associated logos and designs for promotional and information purposes on its website but does not endorse, and is not in any way affiliated with, EVE-Search.com. CCP is in no way responsible for the content on or functioning of this website, nor can it be liable for any damage arising from the use of this website.