| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Sidephex
New Dawn Rising
The Red Skull
   |
Posted - 2007.09.23 08:02:00 -
[1]
Edited by: Sidephex on 23/09/2007 08:03:57
Edited by: Sidephex on 23/09/2007 08:02:45
good day. even tho its 10am over here and im still drunk beyond sanity im thinking about my newly acquired myrm. need some suggestions about the setup tho
6x Vulcans II
1x MWD
1x pt
1x Web
1x Med Electrochemical
1x Sensor Boost
2x Med Rep II
1x Kin, Exp, Th Hardener
1x dunno
1x Auxiliary Nano Pump
1x Exp resist thingy
1x dunno
5x hammerhead II
5x Valkyrie II
5x Warrior II
so basically i wann know a few things:
1) what to put in the last low? would u go for a DC or for a gyro for some extra gankage? i was also thinking about removing the exp resist rig and use a 2nd exp hardener. or maybe i should fit an eanm?
2) what to put in the last rig slot? another aux nano pump? maybe some dmg thingy if i dont use a gyro in the last low? and what if i go for 2nd exp hardener and remove the exp resist rig, what to fit in that rig slot then? or should i just keep it empty to save some money? 
3) would i be the only idiot who does not use 5 not replaceable Ogres ?
4) and the 2nd edit: would u suggest removing the SB with something else? eccm or something like that maybe?
ty in advance
(edit: yea i had to edit because im drunk)
|
Kay Rissa
Russian Thunder Squad
Against ALL Authorities
|
Posted - 2007.09.23 09:01:00 -
[2]
fit damage control, and also 3 eamn t2 better then 1 hardener
Proud member of RTSQ
ps: i dont like to kill innocent ppl, so if i killed u, u rnt innocent
|
Sidephex
New Dawn Rising
The Red Skull
|
Posted - 2007.09.23 09:11:00 -
[3]
hm.... EFT says that with maxed skills active 1 hardener =
expl 59,5%
th and ki 70,8%
with 3 eanms and max comp skills i get
expl 54,7%
th and ki 67,%
ofc they dont require cap. was that your main argument for 3 eanms?
|
Shinca
|
Posted - 2007.09.23 09:52:00 -
[4]
you could fit EM rig and DC II and get around 75% resist to all dmg types, that way you could tank 450 raw dps of any type
you could also put all nano pump rigs, that way you have lower EM and EX resist (you lose about 50 raw dps tanking) but gain roughly 100 raw dps tank in TH and KI because of increased rep/s
the 3x EANM II + DC II has a benefit of not using cap and also giving you a massive EM resistance which would be nice if you are fighting amarr ships. you are however much more vulnerable to EX damage... also with this setup I wouldn't bother with resist rigs since they are stack nerfed with EANMs, use 3x nano pump
personaly I wouldn't use gyro II since you won't do that much more damage and by not using DC II you also lose the 60% resist on hull (on top of having lower resists for armor)
|
Machalath
|
Posted - 2007.09.23 10:01:00 -
[5]
Edited by: Machalath on 23/09/2007 10:01:55
Just a weird thought (I'm weird though too):
Try to fit a Myrmidon as a shield tank. You'll be surprised how well this works.
Use your high slots for remote repper (for your drones) and one or two drone link augmentors and you have an awful mission ship.
It tanks nearly as good as a Drake ;)
Damage output is mostly done by your drones though you'll have 3 or 4 high slots for additional weapons like your vulcans.
Have fun and fly safe.
|
Sidephex
New Dawn Rising
The Red Skull
|
Posted - 2007.09.23 10:09:00 -
[6]
Edited by: Sidephex on 23/09/2007 10:14:02
Edited by: Sidephex on 23/09/2007 10:09:55
 Originally by: Machalath
[...]stuff[...]
do i look like a pve guy? 
Originally by: Shinca
you could fit EM rig and DC II and get around 75% resist to all dmg types, that way you could tank 450 raw dps of any type
you could also put all nano pump rigs, that way you have lower EM and EX resist (you lose about 50 raw dps tanking) but gain roughly 100 raw dps tank in TH and KI because of increased rep/s
the 3x EANM II + DC II has a benefit of not using cap and also giving you a massive EM resistance which would be nice if you are fighting amarr ships. you are however much more vulnerable to EX damage... also with this setup I wouldn't bother with resist rigs since they are stack nerfed with EANMs, use 3x nano pump
personaly I wouldn't use gyro II since you won't do that much more damage and by not using DC II you also lose the 60% resist on hull (on top of having lower resists for armor)
im not that sure if nano pumps are stacking nerfed too... are they?
so your personal suggestion would be 3 hards + DC + a rack of nano pumps? this would have been my personal preference too, cause the bonus + the rigs + exile booster gives quite an intense boost to armor.
wouldnt it make sense tho to replace one of the pumps with an exp rig ? or maybe instead of the DC the eanm? geez i dunno what to do
edit: ok i just did some math and DCII only gives like 0,5 to 2% less resists. (with 3 active hards that is)
so i ll go with that one
question now is just: 3x nano pumps or 2x nano pumps 1x antiexpl
|
Ararius
EP0CH
Black Sun Cartel
|
Posted - 2007.09.23 10:16:00 -
[7]
My myrm setup is-
Highs- rack or ions or 220s, depending on my mood
Mids- Mwd, scram, injector, disruptor, and ewar (a damp, td and sometimes a sb)
Lows-2x MAR II, kin/therm/explo hards, DCU II
Rigs- Just 1 rep amount rig.
Fyi rep amount rigs are stack nerf'd
If I had a choice on putting more rigs, I think i would put resit rigs, or another rep amount.
I dont really think about it much
Im ugly, just look at my face!
|
Sidephex
New Dawn Rising
The Red Skull
|
Posted - 2007.09.23 10:59:00 -
[8]
oh and before this thread ends in nirvana im rly curious about question #3...
|
K al
|
Posted - 2007.09.23 11:07:00 -
[9]
my friend hada setup that could tank like 500dps or something
he had
somthing in higs (salvagers drone links tractors ect ect)
5 LSE II
6 shield flux coils
3 shield recharge rigs
this i think gave him 21k shields and a recharge with 180 secs
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |