| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |

Svensgaard
|
Posted - 2008.03.06 19:49:00 -
[1]
I have been thinking about getting dominix with dual LARs, however I cannot find a setup that I like due to the capacitor issues of running 2 LARs. Anyone with any Dominix setups that they like or use?
Can include T2 or Rigs
cheers
svenny
|

Sunabi
Caldari Defiance Corp Brutally Clever Empire
|
Posted - 2008.03.06 19:57:00 -
[2]
Edited by: Sunabi on 06/03/2008 19:57:43 For PVE or PVP? I assume PVE because you can just use an injector in PVP.
For PVE fill the mids with cap rechargers, and in the lows use 4 rat-specific hardeners, the 2 LARs, and a capacitor power relay. That should run for a long time, and it'll run forever if you put a couple of heavy nosferatus in the highs. I haven't run L4 missions in a domi for a long time, but as far as I remember most missions didn't need both LARs permarunning.
For rigs, you could fit CCCs and use your highslots for something else than nos (guns or salvage or something), or maybe Auxiliary Nano Pumps to increase your tanked DPS.
|

Kusha'an
Gallente
|
Posted - 2008.03.06 20:16:00 -
[3]
Edited by: Kusha''an on 06/03/2008 20:20:06
I cannot permarun 2 LARs, however, most level 4 missions don't require that. My setup is as follows:
High 4x 250mm rails 2x Drone Link Augmentor
Med 3x Cap Rech II Omnidirectional Tracking Link (or 4th Cap Rech II for heavier mission damage) Drone Nav Computer
Low 4x Rat Specific N-Type Active Hardeners 1600mm RT plate MAR II Named LAR
Drones 6x Heavy (Rat Specific) 6x Sentry 6x T2 Meds
Rigs 3x CCC
I can almost permarun the MAR II and the LAR together, but I only activate both when the damage gets too high. I can permanently tank 5 BS this way. My recharge time is 290 seconds.
When my cap skills get better I'll put on both LARs.
Most level 4 missions I only need to run the single LAR. Some level 4 missions don't auto aggro, and I use my sentries and snipe everything and never once turn on my repper or hardeners. 
|

Cryos Ylwan
Red Eye .Inc. Rare Faction
|
Posted - 2008.03.06 21:10:00 -
[4]
HIGH: Drone Link Aug Some other stuff, doesn't really matter, guns for aggro etc.
MED: 5x Cap Recharger II, alternatively swap one recharger for an afterburner
LOW: 2xLAR, 4xMission-specific hardeners, some other module (I think I use a CPR, or an additional EXP hardener when needed...not sure, haven't run the Domi for a few months now)
RIGS: I use 2xCCC and 1xAux Nano Pump
I cannot run the two LARs indefinitely either, but there's no mission that really requires you to do so. Just keep one + hardeners activated and when needed cycle the other rep. Get skills like Energy Management and Energy Systems Operation up if you haven't already, will give you more cap/higher cap recharge rate.
|

Svensgaard
|
Posted - 2008.03.06 21:52:00 -
[5]
Well thanks for the setups, and perhaps I should have been more specific.
I am looking for PVP dominix setups, PVE is rather easy lets me honest. I mean, 4 npc specific hardeners, drone range expander T2 ogres and ccc rigs on a domi makes it so you can solo level 4s with relative ease.
Any PVP setups you can reccomend for a dominix that involves 2 LARs? (cause 1 LAR doesn't cut it)
Svenny
|

pherlopolus
Primal Directive 7-B
|
Posted - 2008.03.06 22:22:00 -
[6]
Edited by: pherlopolus on 06/03/2008 22:24:38 i use this
no cpr just 2 x lar 2, 4 actives and a dc2
i swap between either 250mm rails up top or smartbombs...
EDIT:
similar tank setup on myrm works, but you can swap a cap rech for an ab 2, use a couple of arties up top and tb/salvagers.
i run level 4's with this, can perma run the 2 x mar2's and ab full time.
Originally by: Cryos Ylwan HIGH: Drone Link Aug Some other stuff, doesn't really matter, guns for aggro etc.
MED: 5x Cap Recharger II, alternatively swap one recharger for an afterburner
LOW: 2xLAR, 4xMission-specific hardeners, some other module (I think I use a CPR, or an additional EXP hardener when needed...not sure, haven't run the Domi for a few months now)
RIGS: I use 2xCCC and 1xAux Nano Pump
I cannot run the two LARs indefinitely either, but there's no mission that really requires you to do so. Just keep one + hardeners activated and when needed cycle the other rep. Get skills like Energy Management and Energy Systems Operation up if you haven't already, will give you more cap/higher cap recharge rate.
|

rgt53
Emergent Chaos
|
Posted - 2008.03.06 22:28:00 -
[7]
high
5x Dual 250mm railgun II Drone link augmenor I
mid 4x cap Recharger II 100Mn AB, Omnidectianal Traking link, or drone navigation Computer I
Lows 4 Rat hardeners II 2x Large Armour Reppor II Capacitor Power realy II
rigs 3x CCC I
I Can easily run the 2 large armour reppors. In some missions I add the 100MN AB where theres alot of traveling. can't quite run this perma, (can if i switch off 3 guns)
|

Svensgaard
|
Posted - 2008.03.06 23:00:00 -
[8]
Again, those setups are interesting however they are not PVP setups, they are mission running setups and as I said with my last post I need PVP dominix setups.
svenny
|

sAyArrrr
Glauxian Brothers
|
Posted - 2008.03.06 23:38:00 -
[9]
You need an injected active tank on a domi to use it to full use. So slap a heavy electrochemical cap booster with 800's on and for the rest fit mwd, scram, web, sensorbooster/damp/ecmburst/whatever and in the lows 2x lar and full tank. Highs, heavy neut and medium neutrons. Rep amount rigs and ogres and your good to go, everything t2 ofc
|

Arazel Chainfire
United System's Commonwealth
|
Posted - 2008.03.07 04:08:00 -
[10]
ok... i had written something up, but the forums ate it. Hopefully i can remember what i wrote...
Heres a setup I used, though it never actually got to kill anything. A rather large gatecamp killed it quickly enough that i barely had enough time to launch my drones (i had been trying to catch a smaller group of pirates who had been annoying me earlier, but i jumped into the wrong place at the wrong time... oh well )
Highs 4 large electron blasters (meta lvl 4 because electron blasters are cheeaaap) 2 medium neuts
mids mwd webber scram large cap booster eccm
lows 1 LAR 2 3 active hardeners (ex. kin. and therm.) 1 DCU 2 mag stabs
no rigs
If you downgrade to medium guns, you can drop the mag stabs for another LAR and either a cap power relay or an EANM. You may want to try to fit at least 1 heavy neut onto this though (preferably 2). If you can fit it, 2 heavy neuts, 2 medium neuts, and 2 medium nos would probably be the best set of things in the highs. The eccm is also optional - you can replace that with whatever you want.
-Arazel
|

goodby4u
Logistic Technologies Incorporated
|
Posted - 2008.03.07 04:55:00 -
[11]
Originally by: Svensgaard I have been thinking about getting dominix with dual LARs, however I cannot find a setup that I like due to the capacitor issues of running 2 LARs. Anyone with any Dominix setups that they like or use?
Can include T2 or Rigs
cheers
svenny
Missions:
Mids:t2 cap rechargers. Lows:2x LARs,t2 damage control,power relay II,1x therm hardener,1x explosive,1x kinetic. 1x em rig,1x auxilery rig,1x expl rig. Why titans shouldnt be in nano gangs. |

Dreadmuppet Four
|
Posted - 2008.03.07 10:07:00 -
[12]
Edited by: Dreadmuppet Four on 07/03/2008 10:07:51 it's been a while but I think I used this it is cap stable with everything running (without the injector going) but I did have a centus LAR (I think) which really helps the repair rate and 2 64% hardeners as well so it tanked like a beast. also I think my cap power relayII was a true sansha one (or something like that)
Basically, if you want it good get some faction kit and make damn sure you never lose it!
[Dominix, mission] Armor Thermic Hardener II Armor Thermic Hardener II Armor Kinetic Hardener II Armor Kinetic Hardener II Large Armor Repairer II Large Armor Repairer II Capacitor Power Relay II
Heavy Electrochemical Capacitor Booster I, Cap Booster 800 Cap Recharger II Cap Recharger II Cap Recharger II Cap Recharger II
250mm Railgun II, Antimatter Charge M 250mm Railgun II, Antimatter Charge M 250mm Railgun II, Antimatter Charge M Drone Link Augmentor I Heavy Diminishing Power System Drain I Medium Diminishing Power System Drain I
Capacitor Control Circuit I Auxiliary Nano Pump I Auxiliary Nano Pump I
|

Van Steiza
Battlestars GoonSwarm
|
Posted - 2008.03.07 11:31:00 -
[13]
He wanted a pvp setup guys.
This is focused more on dps to be honest it has a single neut for neuting nanohacs anything small fast or that tries to tackle you etc
Highs-
1x Heavy neut t2 or best named 5x heavy neutron blaster II - void
Meds-
100mn mwd best named or t2 Warp disrupter II stasis webifier Heavy cap booster - 800 charges. Medium cap booster - an 800 charge.
Lows- 2x Lar II 1x Energized adaptive nano membrane II 1x kinetic hard 1x thermic hard 1x explosive hard 1x damage control all t2 if you can.
Rigs- 3x Auxilery nanopumps
I pull back per rep JUST a bout 1200 i dual rep and pull back close to 2400.
Resists are 74% and up.
Anyway Its a very large tank you have a full completelment of drones heavys meds lights :) all t2 and there you have it.
----------------------------------------------- Stop removing my Sig its fine!!!! Nerf Moderaters. |

r0b0to
Awesome People Secret Corp
|
Posted - 2008.03.07 11:33:00 -
[14]
with cap skills at 4/5, you should be able to permarun 2x LARII and hardeners using 5x cap recharger II and 2x CCC ----------- D: |

vanderi
|
Posted - 2008.03.07 11:43:00 -
[15]
Originally by: rgt53
Omnidectianal Traking link, or drone navigation Computer I I Can easily run the 2 large armour reppors.
Quoted for lols
-Vanderi
|

Mangus Thermopyle
Divine Retribution Divine 0rder
|
Posted - 2008.03.07 12:11:00 -
[16]
Shieldtanked domi is faster, but if you want to armor tank it, the following works: High: 5 250 prototype rails, drone link augmentator Mid: 100mn ab, 2 t2 cap rechargers, 2 omni drone tracking Low: 2 t2 LAR, 3 rat specifie hardeners, 2 cpr Rigs: 3 CCC
Permaruns everything, and around 700 DPS with max skills.
|

Corduroy Rab
Digital Fury Corporation Digital Renegades
|
Posted - 2008.03.07 16:58:00 -
[17]
Originally by: Van Steiza He wanted a pvp setup guys.
This is focused more on dps to be honest it has a single neut for neuting nanohacs anything small fast or that tries to tackle you etc
Highs-
1x Heavy neut t2 or best named 5x heavy neutron blaster II - void
Meds-
100mn mwd best named or t2 Warp disrupter II stasis webifier Heavy cap booster - 800 charges. Medium cap booster - an 800 charge.
Lows- 2x Lar II 1x Energized adaptive nano membrane II 1x kinetic hard 1x thermic hard 1x explosive hard 1x damage control all t2 if you can.
Rigs- 3x Auxilery nanopumps
I pull back per rep JUST a bout 1200 i dual rep and pull back close to 2400.
Resists are 74% and up.
Anyway Its a very large tank you have a full completelment of drones heavys meds lights :) all t2 and there you have it.
I use a very similar setup, it is very effective. Only major difference with my setup is I like carrying an ECCM instead of the med injector.
Like all injector based setups your tank-life is limited to how many cap charges you carry, but with some decent cap/mod management you can run for a while.
The only thing I would add is to make sure you carry null ammo as well (or the t1 equivalent) just in case you get webbed too far away from your target.
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |