| Pages: [1] :: one page |
|
|
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Elhina Novae
Stone Shadow Syndicate
deadspace society
   |
Posted - 2008.03.23 16:32:00 -
[1]
Edited by: Elhina Novae on 23/03/2008 16:36:35
Edited by: Elhina Novae on 23/03/2008 16:33:15
I am moving back too empire too relax from all fuss and doing missions again for a while :) I have Energy Management 5 in 3 days so perfected capacitor after that its time for Weapon Upgrades 5. My Fittings skills are close to perfect exept for the WU/AWU.
I know I can handle all level 3 missions flawlessly but is it possible too do level 4 missions in a Amarr Battlecruiser?
For setup I was thinking this for a Harbinger:
7 x Heavy Pulse II
1 x Tractor/Salvager/??Nos??
1 x 10mn Afterburner
3 x Cap rech
1 x Medium Armor Rep II
1 x Damage Control II
1 x EANM II
3 x Race Specific Hardeners
5 x Medium Drones (race specific)
My Level 4 mission experience = zero, so with this setup can you tell me what missions I should reject and simply cannot do? Or would a Prophecy be better for this purpose?
EDIT: Training for BS is a no no as I will be training for Heavy Assaults/Command ships.
EDIT2: Rigs. I was thinking CCC, Nanobot, Accel, Auxilliary Nanopump.
Somebody set up us the bomb |
Riho
Mercenary Forces
|
Posted - 2008.03.23 16:35:00 -
[2]
you will need a good dual rep setup that can run perma... what is really hard. better to train for a absolution OR use a BS.
the gap between lvl3s and 4 is alot bigger than from lvl 2 to 3
----------------------------------
This is Me, fighting stupidity one post at a time.
PS: There are no computer BUGs, there is stuff called "Random Features"
|
Kebast
PooCorp
|
Posted - 2008.03.23 17:04:00 -
[3]
At 30+ mil SP I've done it, but it's not easy. I'd suggest starting with something easy and trying this setup.
Lows: 2x Dual Rep II, RT Plate, specific resists
Med: AB, 3x Cap Regen
High: 7x Focused Med Beam II
rigs: 2x CCC, 1x Nano/aux Pump
I'm not really sure all this will fit for you. If not, switch out the beams with pulse. You want your rat specific resists up in the high 80's at a minimum. Be sure to check the mission and find out if anything warp scrams. Either decline the mission or be sure to kill those first until you figure out what you can and can't do.
|
Valenthra
School of Applied Knowledge
|
Posted - 2008.03.23 17:32:00 -
[4]
 Originally by: Kebast
Edited by: Kebast on 23/03/2008 17:12:59
At 30+ mil SP I've done it, but it's not easy. I'd suggest starting with something easy and trying this setup.
Lows: 2x Dual Rep II, RT Plate, specific resists
Med: AB, 3x Cap Regen
High: 7x Focused Med Beam II
rigs: 2x CCC, 1x Nano/aux Pump
I'm not really sure all this will fit for you. If not, switch out the beams with pulse. You want your rat specific resists up in the high 80's at a minimum. Be sure to check the mission and find out if anything warp scrams. Either decline the mission or be sure to kill those first until you figure out what you can and can't do.
edit: as someone mentioned above, an Absolution or Abaddon is really the way to go. My normal missioning ship is the Absolution. For some missions I use the Sacrilege. Some missions with a lot of battleship NPC's are easier with the lower sig / higher resists HAC. I also use the normal Abaddon / Raven as well.
Ok thx will be worth trying. Well I am about 30 days from zealot + 40days for command ships since I've been doing loads off necessary skills until now. I might aswell stay with level 3 agents for now then. Thx for the quick replies guys.
|
|
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |