| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 1 post(s) |

Kado Suzuki
Ace in the Hole
0
|
Posted - 2012.05.14 18:11:00 -
[1] - Quote
Motherboard http://www.newegg.com/Product/Product.aspx?Item=N82E16813138293 CPU http://www.newegg.com/Product/Product.aspx?Item=N82E16819103911 Video Card http://www.newegg.com/Product/Product.aspx?Item=N82E16814133356 RAM http://www.newegg.com/Product/Product.aspx?Item=N82E16820231394
I have 1 TB sata harddrive ,med tower case 550 watt psu and a ide disk drive
Im wondering if this all should work? |

Jake Warbird
Republic Military School Minmatar Republic
1135
|
Posted - 2012.05.14 18:27:00 -
[2] - Quote
I'm not sure that motherboard with on-board gfx is gonna help you that much since you've got a gfx card lined up anyways. The rest looks good for the budget. Cheers building your rig! |

Markus Reese
Debitum Naturae ROMANIAN-LEGION
175
|
Posted - 2012.05.14 18:35:00 -
[3] - Quote
First off, that cpu isn't on the bios test report, so it could have issues, not run to capacity, no way of knowing exactly. Probably end up throttled. Remember that m-atx boards typically are for small cases, not mid tower so have to run cooler. If you have a mid, better to go with a standard ATX board.
http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=506 see support cpu and ram
Same with ram, not on test report. That doesnt mean it won't work, it just means that it might not work right. Different frequency, etc. I recommend a new motherboard, or choose processor and ram from that list. Tally up voltage, but 550 should be more than adequate provided it has the right connectors. |

Kado Suzuki
Ace in the Hole
0
|
Posted - 2012.05.14 18:46:00 -
[4] - Quote
Markus Reese wrote:First off, that cpu isn't on the bios test report, so it could have issues, not run to capacity, no way of knowing exactly. Probably end up throttled. Remember that m-atx boards typically are for small cases, not mid tower so have to run cooler. If you have a mid, better to go with a standard ATX board. http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=506 see support cpu and ram Same with ram, not on test report. That doesnt mean it won't work, it just means that it might not work right. Different frequency, etc. I recommend a new motherboard, or choose processor and ram from that list. Tally up voltage, but 550 should be more than adequate provided it has the right connectors.
What mobo do u recommend ? |

Markus Reese
Debitum Naturae ROMANIAN-LEGION
175
|
Posted - 2012.05.14 18:55:00 -
[5] - Quote
I have to head out, don't quite have the time to give my budget build suggestion at this moment, watch for me to repost in a few hours, sorry. |

Wyke Mossari
Staner Industries
266
|
Posted - 2012.05.14 18:58:00 -
[6] - Quote
Or http://www.newegg.com/Product/Product.aspx?Item=N82E16813157309 similar spec from a stronger brand and 1600 DDR3 support and stretch for that 1600 DDR3 Ram. |

Pohbis
Neo T.E.C.H.
58
|
Posted - 2012.05.14 19:08:00 -
[7] - Quote
Remove whatever you already have.
http://www.tomshardware.com/system-configuration-recommendation-54.html |

Vyl Vit
Cambio Enterprises
449
|
Posted - 2012.05.14 19:12:00 -
[8] - Quote
Build a top end machine. You'll wind up spending the money anyway keeping the tossed together machine running. Very soon, all this legacy stuff won't be useable anyway. Build one if you have to get a second mortgage, sell your wife (or mother), or rent out your dog. Take my advice. Anyone with any sense has already left town. |

Kado Suzuki
Ace in the Hole
0
|
Posted - 2012.05.14 19:14:00 -
[9] - Quote
Vyl Vit wrote:Build a top end machine. You'll wind up spending the money anyway keeping the tossed together machine running. Very soon, all this legacy stuff won't be useable anyway. Build one if you have to get a second mortgage, sell your wife (or mother), or rent out your dog. Take my advice.
im like super poor so i most make it work :S |

Wyke Mossari
Staner Industries
266
|
Posted - 2012.05.14 19:36:00 -
[10] - Quote
That is 4 time the cost and when you're spending that amount then you really want the Z68XP-UD3 |
|

ISD Eshtir
ISD Community Communications Liaisons
95

|
Posted - 2012.05.14 19:39:00 -
[11] - Quote
Thread moved to OOP. ISD Eshtir Vice Admiral Community Communication Liaisons (CCLs) Interstellar Services Department |
|

Caleidascope
Republic Military School Minmatar Republic
99
|
Posted - 2012.05.14 21:09:00 -
[12] - Quote
The video card is about 20 dollars overpriced. Life is short and dinner time is chancy Eat desert first! |

Markus Reese
Debitum Naturae ROMANIAN-LEGION
175
|
Posted - 2012.05.15 00:15:00 -
[13] - Quote
Alright, what I would build. MSI components because I have never had a problem with their stuff. Micro ATX boards I guess are pretty cheap cost comparatively, just limits expansion
http://www.newegg.ca/Product/Product.aspx?Item=N82E16813130638
I could pick exactly what ram to look at, but go here
http://us.msi.com/product/mb/760GM-P21--FX-.html#/?div=TestReport
and select the support tab. You can see what graphics cards, ram and cpus are tested and bios set to work with the motherboard. Note it has alot more test supported. This will ensure the components you get work properly together without any throttling, heat or performance issues.
Example:
CPU you selected is supported, searched the ADX455WF model processor is in the test list
http://www.newegg.com/Product/Product.aspx?Item=N82E16820139659 ram is supported, as pn KVR1333D3S8N9
For the Gskill, looks like you need the CN7T for the end of the ram designation, which lazy me unfortunately cannto search for.
for graphics card, I like the msi cards as well, rock solid, feel free to select to your budged from this list
http://us.msi.com/file/test_report/TR1_2492.pdf
Again, other stuff can work, but following these will give you the most ease in build since the stuff is tested and bios is known to co-operate with. Might not see this thread again since it got moved, if you have more questions, just shout me a pm, or pop and like and I will look back here.
If budget is your main concern, check out the radeon cards as well. Can use newegg to just search for your price range of card, and see if the card you are looking at is on their test list |

Qui Shon
Capital Construction Research Pioneer Alliance
2
|
Posted - 2012.05.15 05:40:00 -
[14] - Quote
An alternative, more frequently updated PC site build recommendation is sharkyextreme.com: http://www.sharkyextreme.com/guides/MVGSBG/article.php/3939851/PC-Buyers-Guide-for-EntryLevel-Gaming--April-2012.htm
|

Kaaeliaa
Ministry of War
174
|
Posted - 2012.05.27 05:08:00 -
[15] - Quote
The Intel build isn't bad. Most of us gamers have keyboards, monitors, and mice laying around, too, so unless OP really needs new ones...well, don't buy 'em. Also, OP, since you said you already have a 550W PSU, you can drop that as well. However, spend a few extra bucks and get an i5-2500K. The extra overclocking room is worth it. Also, drop the Radeon 6770 for a 6850. Don't waste money on 2GB RAM sticks. Get 4GB each, at the very least. And never pay for Windows. Those are just recommendations.
The one thing I absolutely have to rip about that build, though, is the motherboard. $115 for one PCI x16 slot? I actually just ordered parts for my newest build.
i5-2500K (Sandy Bridge): http://www.newegg.com/Product/Product.aspx?Item=N82E16819115072 Biostar TZ77B motherboard: http://www.newegg.com/Product/Product.aspx?Item=N82E16813138352 PowerColor Radeon 6850: http://www.newegg.com/Product/Product.aspx?Item=N82E16814131374 120GB OCZ Agility SSHD: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227726 8GB G.SKILL PC17000 RAM: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231468 Corsair H60 Liquid Cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181015
I had to buy thermal compound (don't forget it!), a PSU, and a case, and still paid less than $750. You could probably come in at less than that. |

Akita T
Caldari Navy Volunteer Task Force
1104
|
Posted - 2012.05.27 07:36:00 -
[16] - Quote
Guy wants a budget build, and he repeated that price is of the utmost importance to him since he's strapped for cash. Recommending him stuff 2-3 times more expensive is not helping him at all.
He already has a case+PSU, HDD, optical drive, so all he needs in mobo+CPU+GPU+RAM. The motherboard is of very little consequence on a budget non-overclocker build, so I'd only say switch to the one Wyke Mossari posted, that looks better than the one in the OP anyway.
So the only real question is, what does he need the build for, or better said, what performance does he expect on several usage scenarios ?
If, for instance, all he really needs it for is casual EVE gameplay (single client, no huge fleet battles), then what he posted in the OP is perfectly fine for that, as it will give him sufficiently smooth playable framerates in most situations he's likely to be in with only minor sacrifices to graphic detail down from maximum possible... and all of it at rock-bottom prices.
If he's likely to multi-client, he should first go for more RAM, then a better GPU. RAM is dirt cheap, so probably best to just go for something like this : http://www.newegg.com/Product/Product.aspx?Item=N82E16820231424
If he finds himself often in larger fleet battles, he should first go for a faster CPU, then a better GPU.
P.S. Extremely similar thread : https://forums.eveonline.com/default.aspx?g=posts&t=110908 http://wiki.eveonline.com/en/wiki/User:Akita_T http://eve-search.com/stats/Akita_T |

alittlebirdy
All Hail The Liopleurodon
31
|
Posted - 2012.05.27 07:41:00 -
[17] - Quote
Link everything BUT the most important part... the PSU... |

Akita T
Caldari Navy Volunteer Task Force
1104
|
Posted - 2012.05.27 07:45:00 -
[18] - Quote
alittlebirdy wrote:Link everything BUT the most important part... the PSU... He already has it, and it's probably a dirt-cheap one that came with the case. At the grade of components he's likely to buy, the PSU is hardly relevant, since he probably won't even use half of its capacity, and a quality PSU is likely to be too expensive to be worth purchasing. He might not even need a PCI-E power connector, or if he needs one and the PSU does not have it, he can use a MOLEX adapter which costs a couple of dollars if it doesn't already come with the video card anyway.
http://wiki.eveonline.com/en/wiki/User:Akita_T http://eve-search.com/stats/Akita_T |

alittlebirdy
All Hail The Liopleurodon
31
|
Posted - 2012.05.27 15:34:00 -
[19] - Quote
And since you seem (yet maybe don't) know about PC parts you would know SOME psus EXPLOAD at 1/2 power if not at LEAST fall way out of spec.
But ya... the 1 part than can kill every other part in the pc don't matter... worked out fine for ACER right? I mean they don't pop psus like candy. Let's ignore the fact you can get a high end 450 for sub $30... O and DURRR you can never budget build cheaper that OEM... so this whole thing is pointless the only reason to budget build is to get BETTER parts... you want cheap **** just buy an acer.
Sorry, to say the psu does not matter just makes you a total idiot.
O pro tip most POS psus that lack pci-e power can't support the draw... so the plan of let's use an adaptor... TROLLOLOLOL
Oh if only I had a link to the PSU that had cement as as the PFC...
Should apply this logic to life...
Want cheap car... and cheap fixes...
Let's buy the most POS tires we can... after all, they only do everything for a car... from stop, to control it, why care about any other damage that could come from it? |

Kaaeliaa
Ministry of War
174
|
Posted - 2012.05.27 16:14:00 -
[20] - Quote
I did recommend a budget build, or rather, I suggested improvements to one in the post that I quoted. The i5 is not expensive for its capabilities. The problem is that you can NOT cheap out too much on the parts. It's better to spend just a little more and give yourself headroom for overclocking and upgrades; thus making it so you can go longer without buying a whole new rig.
Also, the OP posted a micro ATX mobo, which I would recommend strongly against since he/she already has an ATX mid tower.
TL;DR: you can build a new PC on a decent budget, but don't be cheap. Buy nice parts and leave room for upgrades. |
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |