|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |
BearJews
|
Posted - 2011.08.13 17:30:00 -
[1]
HI all my current ship which is a buzzard with 2 rigs, a sisters probe launcher, core scanner probes.
SKills are cov ops lvl 4, asometric pinpoint lvl 3, asometric range finding lvl 4, asometrics lvl 4 with base sensor strength of 99.6. And for the LIFE of me i could not get this scanned down past 75%. I tried a tetrahedron, and pyramid, a cross design, trying to get the probes to overlap and have the signature right in the middle as tight as possible and i could not do it. Tried for 30 minutes.
Any tips? From my understanding i almost have perfect skills to scan anything down and i still could not get it past 75. SO my thinking is i'm aligning my probes wrong somehow, but i've never relaly had an issue before ( i also never came accross a 10/10 site). Thank you.
|
BearJews
|
Posted - 2011.08.13 18:19:00 -
[2]
almost perfect. For some reason that wasn't in there. WIth a 99,6 sensor strength i'm pretty damn close. Thanks for your input though
|
BearJews
|
Posted - 2011.08.13 18:24:00 -
[3]
Originally by: Fustor Edited by: Fustor on 13/08/2011 18:20:32 I dont know so good english but will try to explain imagine o = 70% signal strenght and [ = edge of probe balloon so [o] = 75% .. then give it some space like this [_o_] = 80% then give a little more space [__o__] = 85% and do that until 100%
CLOSER NOT MEANS BETTER
just put probes little bit closer and closer and closer
I'm not quite understanding, but i will try. I start off at 32 au with with a single prober, get a .25% hit and then i launch the other 4 in a cross design. The original being in the center. From there i change the range to 16 au with all 5, then from there i went down until i was .25 au and that's where got a 75% hit. From there what should i do? Move them apart, then closer until the % increases?
|
BearJews
|
Posted - 2011.08.15 15:14:00 -
[4]
I've been scanning since i started. It is what i chose to do. this 10/10 was different. Like i stated before this was the first time i couldn't scan something down. I've gone and invested some sisters core probe scanners. And scan strength is now at 117 or so (don't remember but it was in the 110 range). I will try repositioning in different planes to see if that works the next time i come across a site that is challenging to scan down.
Thank you for all the replies. I really appreciate it.
|
BearJews
|
Posted - 2011.08.17 16:04:00 -
[5]
The only thing i can think of that i was doing wrong was the deviation from the icon. I was trying to get the 5 probes to overlap so that the sphere of the overlapping probes were as tight as possible around the icon. i was using the technique where i would have one centered on the symbol/icon whatever and have the other 4 in a cross pattern overlapping one another in the center.
|
BearJews
|
Posted - 2011.08.17 17:00:00 -
[6]
Yes you are right, i was doing A
|
BearJews
|
Posted - 2011.08.18 13:03:00 -
[7]
I will be bringing that to five as well as archeology. Just found out that some sites require at least a tech II analyzer to open up cargo. Once again thanks to the guy for making that photo, i love you long time!! And thank you all for your awesome replies. Except for the first reply, he's a douchebag.
|
BearJews
|
Posted - 2011.08.18 17:15:00 -
[8]
Are you sure? When i tried analyzing the cargo to access it, it told me it was too complex or something like that.
|
BearJews
|
Posted - 2011.08.19 13:22:00 -
[9]
I just learned that i needed salvaging at lvl 4 lol. I'm learning a lot these past few days exploring out in null, it's actually quite exciting and very very fruitful. Just did my first 7/10 plex with some mates and made 300 mill or so in drops and a ton in bounties, scanned down a mag site with over 100 mil in drops. I love exploring.
I was arranging my probes incorrectly for the final scan down (.25au), but now i know my folly.
|
|
|
|