Arronicus
Vintas Industries
Mistakes Were Made.
168
   |
Posted - 2013.02.05 07:36:00 -
[1] - Quote
Vytoryn wrote:i believe i've found a problem in the Reactive Armor Hardner
1 Active Armor Hardner activation cost (30 GJ) 2 cost (60 GJ) thats (3 GJ) drain to ship capacter
1 Reactive Active Armor Hardner activation cost (35.7 GJ) thats (5.1 GJ) drain to ship capacter
i have Armor Resistance Phasing at level 3 at the time of this post
Im using a random ship with a captecer cap of (31.7 GJ)
Why does a Reactive Active Armor Hardner drain more capacter then 2 Active Armor Hardner
i encurage people in EVE to look
You've failed to mention that the Reactive armor hardener drains more capacitor than 3 active armor hardeners.
Additionally, no, you do not have a random ship, nor does it have a capacitor capacity of 31.7 GJ.
The ibis has among the lowest capacitor capacities of any ship in the game, and it has a capacitor capacity (base) of 130 GJ.
The 31.7 GJ your ship has, is the peak capacitor recharge rate.
Furthermore, Since the reactive armor hardener can fill the role of multiple active armor hardeners, while occupying only one slot, it allows you to fit something else in that/those other low slots instead. Since capacitor is your issue, we will fit a beta reactor control: Capacitor power relay, instead. In this case, your peak capacitor recharge rate is increased by 24%, or an increase of 8.6 GJ per second. Therefore:
2 Active armor hardeners consume a net of 3GJ of capacitor per second, with a fitting requirement of 72 CPU, with the bonus of being able to overheat.
1 Reactive Armor hardener + 1 BRCCPR PRODUCES a net INCREASE of 3.5 GJ/second, at the expense of 27 cpu, the same amount of lowsecs, and has the ability to adapt to other resistances than just the 2 the active ones go to.
I think it's pretty clear to see that your entire post is based on a fallacy: That 2 Active armor hardeners use less capacitor than 1 Reactive Armor hardener, and a capacitor module. (You cannot argue against fitting the capacitor module, when the 2 active hardeners would take the two slots, and capacitor is the issue.) |