|
Author |
Thread Statistics | Show CCP posts - 16 post(s) |
|
CCP BunnyVirus
C C P C C P Alliance
966
|
Posted - 2013.08.01 22:15:00 -
[1] - Quote
I'm listening 3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
975
|
Posted - 2013.08.03 15:49:00 -
[2] - Quote
Maximus Andendare wrote:Unsuccessful At Everything wrote:Yazzinra wrote:I was going to say unfuck the megathron model..... Im not sure if you have one in your area, but please seek an appointment with an opthamologist ASAP. Only thing about the Mega I don't like is the lights point down the slope of the front scoops. I wish they pointed forward, and the Mega would be damn-near perfect. Also, CCP BunnyVirus, where are those drone forcefields for the drone ships we were promised? (Dragoon, Arbitrator, Thorax etc. don't have them, when they clearly have holes for the drone bays. Also, can we get some visible drone bays on the drone ships (Vexor, Ishtar, Tristan, Dominix)?)
Only new remodeled ships will get them 3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
975
|
Posted - 2013.08.03 15:51:00 -
[3] - Quote
Inokuma Yawara wrote:I'd like to see the racial industrial ship designers and builders take a stab at designing and building mining ships, to compete with O.R.E.'s line of mining ships from the Venture class mining frigate, up to their behemoth exhumers. As it is now, O.R.E. has a monopoly on licensing the building of their mining ship designs to shipbuilders throughout the galaxy. At the same time, why not have O.R.E. introduce their own line of industrial freighters capable of large payloads or blockade running.
Perhaps O.R.E. can design and introduce a very sophisticated and costly, but effective drone that can open cargo holds and loot the contents, as well as scavenge the wrecks. Of course, the operator of such a drone would have to be careful not to break any laws and thus become a suspect, and because it is a drone, it would have a limited cargo hold for bringing back the looted cargo hold contents, so it might have to make two trips, or perhaps not be able to fit some items at all. Such a drone would only be able to be operated from specially built ships for the purpose of scavenging wrecks, like the Noctis, for example.
I actually started working on modeling redesigned versions of the retriever but had to stop because of some decisions and now we have to come up with a new design for them :)
3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
975
|
Posted - 2013.08.03 17:47:00 -
[4] - Quote
Ken 1138 wrote:Golem & Kronos The Golem is just a Raven with orange paint. Do what you did to the Stealth bombers and make it look bigger and tougher to be like what it's design to be. The Kronos had a better skin/[paint job before the polish patch a while back it was shiny . Give it a better shine and thicker looking armor. Maybe change the "bridge" elements above the engines to look high tech. The Paladin had its remodel with the Apoc change. I like it, I mean who doesn't like gold and red? I think the Vargur looks pretty different and awesome from T1 Tempest already. The sails are changed and look more "efficient" the armor plates, paint and cockpit.
The paladin will get its own model, just sayin 3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
975
|
Posted - 2013.08.03 19:44:00 -
[5] - Quote
Tristan Everness wrote:CCP BunnyVirus wrote:I'm listening What about remodelling Stations? How hard would it be compared to ships?
Remodeling is quite Easy, but texturing them without losing texture quality is not that easy . We have some ideas how we want to redo them but so far had no time to do it. 3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
975
|
Posted - 2013.08.03 19:45:00 -
[6] - Quote
Beekeeper Bob wrote:None of the above.......
I would prefer CCP spend some time fixing all the bags and making the game playable again, EYECANDY does nothing to help these issues......
You dont want me to start messing with the code 3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
975
|
Posted - 2013.08.03 19:45:00 -
[7] - Quote
Shinzhi Xadi wrote:When you finally get to updating the Abaddon, I would love to see it remade to REALLY look like its original artwork.
That original artwork had different proportions, and a lower wider look, totally awesome to me.
Oh, and Bunnyvirus, your killing me with all this delaying on letting us see the new Paladin!!
When the time is right you will see it
3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
980
|
Posted - 2013.08.04 03:30:00 -
[8] - Quote
Lors Dornick wrote:CCP BunnyVirus wrote:
Remodeling is quite Easy, but texturing them without losing texture quality is not that easy . We have some ideas how we want to redo them but so far had no time to do it.
Hmm, BunnyVirus seems to be be flying the art department flag. Most likely an intradepartment contest of getting the most likes during vacation with the UI coders. Your commitment has been noted, now we just wait for the delivery of eye candy in the next expansion ;)
There is going to be alot of ...........,......,....,...,... in it
3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
985
|
Posted - 2013.08.05 12:11:00 -
[9] - Quote
Cassius Invictus wrote:Harvey James wrote:ZeeWolf Novus wrote:Any and all asymmetrical ships. Mega/Mach model has a random engine on top please remove it The odd engine thingi on Mach and Mega looks just stupid and annoying. For gods sake this engine is not even working! Also pls remove the side sponson on the front of the Omen. DonGÇÖt damage my beloved Amarr ships with asymmetric design! Leave that for Minmatar junk ;). Also Absolution/Prophecy - the model is very cool, but outdated . It is too fat and too short. Make it longer and remove the fat belly, it looks like itGÇÖs pregnantGǪ BTW if u change my dear Absolution to Harbinger model I will hack EVE, fly a dread fleet to high sec and destroy every station with your clone on it. Then again a Hurricane model on on Sleipnir would be sexy. Ps. DonGÇÖt care for Caldari much but their entire frigate, cruiser an probably bc line needs a serious work (with nuclear blasts).
That Engine thing on the mega is not an engine 3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
986
|
Posted - 2013.08.05 14:39:00 -
[10] - Quote
Harvey James wrote:CCP BunnyVirus wrote:Cassius Invictus wrote:Harvey James wrote:ZeeWolf Novus wrote:Any and all asymmetrical ships. Mega/Mach model has a random engine on top please remove it The odd engine thingi on Mach and Mega looks just stupid and annoying. For gods sake this engine is not even working! Also pls remove the side sponson on the front of the Omen. DonGÇÖt damage my beloved Amarr ships with asymmetric design! Leave that for Minmatar junk ;). Also Absolution/Prophecy - the model is very cool, but outdated . It is too fat and too short. Make it longer and remove the fat belly, it looks like itGÇÖs pregnantGǪ BTW if u change my dear Absolution to Harbinger model I will hack EVE, fly a dread fleet to high sec and destroy every station with your clone on it. Then again a Hurricane model on on Sleipnir would be sexy. Ps. DonGÇÖt care for Caldari much but their entire frigate, cruiser an probably bc line needs a serious work (with nuclear blasts). That Engine thing on the mega is not an engine whatever it is it needs to be deleted
nope
3D Artist |
|
|
|
CCP BunnyVirus
C C P C C P Alliance
1012
|
Posted - 2013.08.14 22:12:00 -
[11] - Quote
Marwolaeth Arglwydd wrote:I would like to see a revamp of all T2 ships in line with what was done for the Bombers. Were they take the lines of the T1 version and modify it for the roll they are to fill. I understand that the Bombers were done the way they were to accommodate for the new launchers that came out. But it also made them look a whole lot better.
Also it would be nice to have at least one unique ship of each frig/cruiser/BC/BS for each pirate fraction. And a complete rework of the Caldari Cruiser line.
i think i can speak for the whole art team that we want to see different versions for every t2 version as well, but due to time constraints we couldnt do that so far. 3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
1012
|
Posted - 2013.08.14 23:41:00 -
[12] - Quote
Makoto Priano wrote:BunnyVirus, what's next on the art block? :D
You have to wait till we announce it like everyone else. 3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
1018
|
Posted - 2013.08.16 17:58:00 -
[13] - Quote
Marwolaeth Arglwydd wrote:CCP BunnyVirus wrote:Marwolaeth Arglwydd wrote:I would like to see a revamp of all T2 ships in line with what was done for the Bombers. Were they take the lines of the T1 version and modify it for the roll they are to fill. I understand that the Bombers were done the way they were to accommodate for the new launchers that came out. But it also made them look a whole lot better.
Also it would be nice to have at least one unique ship of each frig/cruiser/BC/BS for each pirate fraction. And a complete rework of the Caldari Cruiser line. i think i can speak for the whole art team that we want to see different versions for every t2 version as well, but due to time constraints we couldnt do that so far. I completely understand, but would 1 ship type reworked every 3 months or so be possible? It would take a while to work you way though all T2's but as long as its a trickle of revamped ships....
It would be more like one at a time and it definetly not possible to rework 1 ship type every 3 months
3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
1019
|
Posted - 2013.08.16 23:45:00 -
[14] - Quote
Solhild wrote:CCP BunnyVirus wrote:Marwolaeth Arglwydd wrote:CCP BunnyVirus wrote:Marwolaeth Arglwydd wrote:I would like to see a revamp of all T2 ships in line with what was done for the Bombers. Were they take the lines of the T1 version and modify it for the roll they are to fill. I understand that the Bombers were done the way they were to accommodate for the new launchers that came out. But it also made them look a whole lot better.
Also it would be nice to have at least one unique ship of each frig/cruiser/BC/BS for each pirate fraction. And a complete rework of the Caldari Cruiser line. i think i can speak for the whole art team that we want to see different versions for every t2 version as well, but due to time constraints we couldnt do that so far. I completely understand, but would 1 ship type reworked every 3 months or so be possible? It would take a while to work you way though all T2's but as long as its a trickle of revamped ships.... It would be more like one at a time and it definetly not possible to rework 1 ship type every 3 months I rest my case. (for more Art Devs so more art awesomeness + pay them more )
I like the pay more part :D
3D Artist |
|
|
CCP BunnyVirus
C C P C C P Alliance
1025
|
Posted - 2013.08.19 17:41:00 -
[15] - Quote
thanks 3D Artist |
|
|
ISD Suvetar
ISD Community Communications Liaisons
2628
|
Posted - 2013.12.19 02:11:00 -
[16] - Quote
Personally speaking as a player, I'd like to see a unique hull for the Bhaalgorn and the Rattlesnake.
Moar bloodraider style ships plx!
KTHXBYE :) ISD Suvetar Captain/Commando Community Communication Liaisons (CCLs) Interstellar Services Department |
|
|
|
|