|
|
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Darkopteron
Righteous-Indignation
   |
Posted - 2007.04.19 13:32:00 -
[1]
This has been a very sucessful setup for me:
High
5x Light Neutrons + Antimatter S
Mid
1x 20k Disruptor
1x Med Cap Booster + Cap Booster 800's
1x 10mn MWD
Low
1x EANM
1x Energized Reactive
1x 1600mm Rolled Tungsten
1x RCU
1x Best MAR
Drones
5x Hammerhead I
I'm pleased to say I defeated a Myrmidon (1 month old) with this setup, which for a rookie pirate like myself, was close, and a huge adrenaline rush.
I'm considering removing my MWD (and as a result the RCU), replacing them with a 10mn AB and another EANM - this would give me better resists - but would it be best to switch to 150mm rails for this? |
Darkopteron
Righteous-Indignation
Ghosts Syndicate
|
Posted - 2007.06.11 16:29:00 -
[2]
Gank-and-tank setup for gang use, low-skill setup.
Thorax
Medium Nosferatu I
Modal Ion Particle Accelerator I [120xAntimatter Charge M]
Modal Ion Particle Accelerator I [120xAntimatter Charge M]
Modal Ion Particle Accelerator I [120xAntimatter Charge M]
Modal Ion Particle Accelerator I [120xAntimatter Charge M]
X5 Prototype I Engine Enervator
Faint Warp Prohibitor I
Y-S8 Hydrocarbon I Afterburners
Magnetic Field Stabilizer II
Magnetic Field Stabilizer II
400mm Reinforced Rolled Tungsten Plates I
Energized Reactive Membrane I
Medium Armor Repairer II
Rigs : Empty Slot \ Empty Slot \ Empty Slot \
Hammerhead I
Hammerhead I
Hammerhead I
Hammerhead I
Hammerhead I
1676 shield, 4.19/s, E/T/K/Ex=0/19/39/59
3229 armor, E/T/K/Ex=59/35/35/43
1581.25 cap, +9.28/s, -30.027/s
452.0 m/s
220.1 DPS (with drone interfacing 4 and cack gun skills, but hey)
Could swap out the MAR for a SAR and use an 800mm plate instead, if you feel inclined.
|
Darkopteron
Righteous-Indignation
Ghosts Syndicate
|
Posted - 2007.06.20 23:59:00 -
[3]
 Originally by: fathitman
My setup when in gang of at least 5 or more
x5 Heavy Electron Blasters II (Void M)
---
x1 10MN MicroWarpDrive II
x1 Med Cap Booster II
x1 Warp Disrupter II
---
x1 400mm Nanofiber Plate I
x1 Damage Control II
x2 Energized Adaptive Nano Membrane II
x1 Small Armor Repairer II
Thoughts?
At engineering V and advanced weapons upgrades III you should have enough grid left over to just squeeze on an 800mm plate with that setup. To be honest though I wouldn't cap inject when only using a SAR.
|
|
|
| |
|