| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |

Smokeyblood
|
Posted - 2007.05.04 20:38:00 -
[1]
ok wtf. Did this in my raven.
6 cruise 1xl t1 named booster 4hard (kin kin em therm) 2xbcu 3x pdu
All named parts.
Cant tank the 3 bs spawns unless i snipe out at 70km. Am i getting my resist wrong? or do they just hit like a truck.
|

Lrrp
Minmatar Gallente Mercantile Exchange
|
Posted - 2007.05.04 21:02:00 -
[2]
They hit like a truck, but the alloys they drop are danged nice. I used a Raven also and distance was my friend.
|

Ralara
Caldari Lilandri Foundation
|
Posted - 2007.05.04 21:23:00 -
[3]
the 4 starting rats are the triggers. Kill 1, wait for the new spawn, kill it. Then kill the next starter drone. And so on. No more than 3 BS rats at any one time.
I'm a corp thief. And remember, I only do it because I like your robot.
Nice Isk. I'll take it. |

Doragee
Minmatar Unknown Society
|
Posted - 2007.05.04 21:57:00 -
[4]
Originally by: Ralara the 4 starting rats are the triggers. Kill 1, wait for the new spawn, kill it. Then kill the next starter drone. And so on. No more than 3 BS rats at any one time.
^^ as stated before: One of the easiest mission ... and would be one of main sources of high mins if the new regions didn't hit empire... --
|

Smokeyblood
|
Posted - 2007.05.04 22:05:00 -
[5]
Edited by: Smokeyblood on 04/05/2007 22:03:04 I did do it that way but they were breaking my tank just about every time. cap skills at 3/4 and shield skills at 4
Id kill 1 then 3 bs would show up break my tank and continue on. id kill 2 warp out back in repeat
|

Idara
Caldari Missioners Anonymous
|
Posted - 2007.05.04 22:17:00 -
[6]
It can be annoying, but cripes, 3-5k Zydrine per mission as loot is damn nice.
I have nothing constructive to add except that I can do it with my NH easy enough, and can tank all 4 reinforcement spawns with my alt in a Raven remote shield transferring me with 1 Medium T2.
/shrugs --- in EVE - Idara |

ataupe
Acme Technologies Incorporated
|
Posted - 2007.05.04 22:59:00 -
[7]
Maybe your hardener selection could be better. I use two v-m15 braced multispectrals instead of the kinetics, plus one thermal and one em. If you aren't worried about being probed during a mission, don't forget to use drones. Might as well get all the help you can. If you have tech 1 bcu's, the tech 2's will give you a little more damage. The bcu-2's are the first tech 2 modules I ever bought. If your skills allow, you might consider going to three ballistic control units, see if the rate of fire bonus or even the small penalized damage bonus from the 3rd one makes any difference (since killing faster is the best way to save your tank). But the real key to this mission is killing just one of the first four drones, kill the spawn that triggers, kill the second of the original four, kill the spawn that triggers, etc. Triggering all four reinforcement spawns, and then going to work on them would be a nightmare.
|

Wolf Simon
|
Posted - 2007.05.05 07:18:00 -
[8]
Replace one PDU for Damage control system and as said before, both kin hardeners for inv fields. It is quite hard but can be done without warp out in tech 2 raven, no fraction mods.
|

Ghan Tylous
The Graduates Ivy League
|
Posted - 2007.05.05 08:42:00 -
[9]
Warp in, make a Bookmark, warp out. Warp in at 100km, kill one bomber drone, kill the BS spawn with its support ships. Rinse and repeat.
You should consider to train for T2 shield hardeners. --- It have always fallen to a few to sacrifice for the good of many
Originally by: CCP Sharkbait we are screwed.
|

Andrue
Amarr
|
Posted - 2007.05.05 13:28:00 -
[10]
Edited by: Andrue on 05/05/2007 13:27:31 Edited by: Andrue on 05/05/2007 13:26:49
Originally by: Ralara the 4 starting rats are the triggers. Kill 1, wait for the new spawn, kill it. Then kill the next starter drone. And so on. No more than 3 BS rats at any one time.
Yup. Like all drone missions it's easy if you do it properly. It's also worth moving away to get some distance because the spawns arrive at the same place every time.
I usually move out to 70km from their spawn point then I can blow them up before they get into range. Okay so I'm using a T2 fitted Raven but I rarely even bother to boost my shields. -- (Battle hardened industrialist)
[Brackley, UK]
Please don't read this signature. |

Michael Caldar
DangerZone Inc.
|
Posted - 2007.05.05 18:45:00 -
[11]
I use 2xExp 1xKin and 1xInv against all drones in level 4 missions. Not sure if they are different in the Attack of the Drones but that's a pretty much bug standard damage breakdown of all level 4 drones. Plus what Ralara said - deal with one spawn at a time and you'll be fine. 
YMMV
|

Selena 001
|
Posted - 2007.05.05 22:20:00 -
[12]
2 Explosive, 1 Thermal and 1 Kinetic hold a dual rep armor tank steadily. I think that equates to something like 72% Exp, 60% Therm, 60% Kinetic and 60% EM resistances. My dual rep used to repair approx 160-165hp/s...
You should be able to come to some sort of shield equivalent easily enough. ___________
NATIONAL SARCASM DAY!! |

Plib
|
Posted - 2007.05.06 09:17:00 -
[13]
Originally by: Selena 001 2 Explosive, 1 Thermal and 1 Kinetic hold a dual rep armor tank steadily. I think that equates to something like 72% Exp, 60% Therm, 60% Kinetic and 60% EM resistances. My dual rep used to repair approx 160-165hp/s...
You should be able to come to some sort of shield equivalent easily enough.
For my Raven I use 1 Invul;1 Photon and 1 Therm. It's a bit crappy but plenty good enough for this mission.
|

Royaldo
KVA Noble Inc. Sylph Alliance
|
Posted - 2007.05.06 10:09:00 -
[14]
ive heard alot about this mission before i did it. was very easy. only used 1 repper. tank kinetic and thermal.
|

Alaron Giancol
Resurrection R i s e
|
Posted - 2007.05.07 02:15:00 -
[15]
I did this mission earlier with a double repped apoc.
wasn't sure on the resists so I went with my standard merc/drone setup of 1 EANM and 1 of each exp/therm/kin hardeners, dcu, and 2x lar (all t2). The only time I was in danger of dying was when I got annoyed at the trigger drones (didn't know they were all triggers at the time) and popped 2 or 3 of them at once. By in danger, I mean running both reps at the same time still wasn't able to bring my armor to 100%
|

Cmd Criton
Caldari Zooner Corp G.U.A.R.D.
|
Posted - 2007.05.10 15:47:00 -
[16]
The thing with drones is they shoot every kind of damage. So you need to have an overall good resist. I usually fly this mission in an Abaddon with a resist of 85-90% depending what damage type. With such high resists you can equipp 1x Large T2 repper and they wont break your tank.
OK i live in the new regions so therefore my main income source is ratting drones  ******************************
Great minds think alike |

Randolf Sightblinder
Ex Coelis
|
Posted - 2007.05.10 18:23:00 -
[17]
The drone BS's in this mission arn't the normal drone BS's though they're not the nasty ones from kill the informant either. They do however do quite a bit of EM compared to the common drone BS's in infested outposts. I believe when I was doing this in a drake I went em, therm, invuln on the hardners with BC4 that pretty much flattens the resists. I really miss that resist boost in my raven.
Randolf
|

Kai Jyokoroi
The Collective Against ALL Authorities
|
Posted - 2007.05.10 19:15:00 -
[18]
Originally by: Wolf Simon Replace one PDU for Damage control system and as said before, both kin hardeners for inv fields. It is quite hard but can be done without warp out in tech 2 raven, no fraction mods.
IT'S FACTION MODS
FACTION!!!!
 _____________ WE ARE THE COLLECTIVE. RESISTANCE IS VOLTAGE OVER CURRENT.
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |