| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Verton
   |
Posted - 2009.01.29 16:04:00 -
[1]
I just got my first Phobos and I am looking for some advice on fitting. I have been chating with the guys in my corp and here are a few that they have come up with. I have never flown a Phobos before, so I have no real experience with fitting this ship.
/*Verton*/
[Phobos, Setup 1]
Medium Armor Repairer II
Medium Armor Repairer II
Armor Explosive Hardener II
Armor EM Hardener II
Energized Adaptive Nano Membrane II
Capacitor Power Relay II
Cap Recharger II
Cap Recharger II
Cap Recharger II
Cap Recharger II
Warp Disruption Field Generator I
Heavy Neutron Blaster II
Heavy Neutron Blaster II
Heavy Neutron Blaster II
Heavy Neutron Blaster II
Heavy Neutron Blaster II
Capacitor Control Circuit I
Capacitor Control Circuit I
|
Verton
|
Posted - 2009.01.29 16:04:00 -
[2]
[Phobos, Phobos Setup 2]
Medium Armor Repairer II
800mm Reinforced Rolled Tungsten Plates I
Armor Explosive Hardener II
Armor EM Hardener II
Energized Adaptive Nano Membrane II
Capacitor Power Relay II
Sensor Booster II
Sensor Booster II
Cap Recharger II
Cap Recharger II
Heavy Neutron Blaster II
Heavy Neutron Blaster II
Heavy Neutron Blaster II
Heavy Neutron Blaster II
Heavy Neutron Blaster II
Warp Disruption Field Generator I
Capacitor Control Circuit I
Capacitor Control Circuit I
|
Verton
|
Posted - 2009.01.29 16:05:00 -
[3]
[Phobos, Phobos Setup 3 Tackle]
Medium Armor Repairer II
1600mm Reinforced Rolled Tungsten Plates I
800mm Reinforced Rolled Tungsten Plates I
Armor Explosive Hardener I
Damage Control II
Energized Adaptive Nano Membrane II
10MN Afterburner II
Fleeting Propulsion Inhibitor I
Medium F-RX Prototype I Capacitor Boost, Cap Booster 25
Cap Recharger II
Warp Disruption Field Generator I
125mm Railgun II
125mm Railgun II
125mm Railgun II
125mm Railgun II
Improved Cloaking Device II
Trimark Armor Pump I
Trimark Armor Pump I
|
Verton
|
Posted - 2009.01.29 16:59:00 -
[4]
 Originally by: o0TuNa0o
- You neglected to mention where your going to be using this?
If it's 0.0, You'll want a buffer tank. Or an onyx with buffer tank
If it's low sec, then it;s got to be a n active setup to tank the gund. Phobos is the best low sec HIC imo, mainly due to it's ability to fit multiple sensor boosters to catch fast ships. Most other HIC's need to be remotely sensor boosted to do the same.
TuNa
Hey TuNa:
It will be exclusively 0.0. There seems to be a lot of variation on the Phobos lows, but most of the variants I have seen, have at least one 1600mm plate.
I've seen an Onyx (passive) buffer tank. Most impressive.
/*Verton*/
|
Verton
|
Posted - 2009.01.30 01:52:00 -
[5]
Originally by: Sergeant Alexander
Edited by: Sergeant Alexander on 29/01/2009 18:21:28
High - 4 tech 2 blasters, 2 bubbles, one with script so you can point
Medium- 1 MWD, optional Web, Medium ElectroCap booster with 800 charge, use the rest of the slots for Sensor boosters.
I was curious about the other setups not having a MWD. Valid point about HICs being made for tank.
Thanks for the fitting advice.
/*Verton*/
|
| |
|