| Pages: [1] |
1. Can invention actualy make you isk? - in Science and Industry [original thread]
Originally by: Callista Omenswarm Originally by: Lana Hellfury Are people really inventing these at a loss? You'll maximise your invention profits if you pick up the T2 component BPOs and also manufacture your own T2 comps... e...
- by Halvus - at 2009.06.04 11:05:00
|
2. [service] Profitableness of R&D Agents - in Science and Industry [original thread]
I just wanted to say thankyou for making this web page. I now see that I'm using a less than optimal set of agents :)
- by Halvus - at 2009.02.16 21:58:00
|
3. High-sec POS defence - in Science and Industry [original thread]
Edited by: Halvus on 22/09/2008 08:00:23 Your setup looks OK for 4 BS targets. However, my experience is that a POS won't kill much unless it is manned by a POS gunner. That's because the POS will cycle targets, so the attackers can warp away ...
- by Halvus - at 2008.09.22 07:59:00
|
4. Beginners manufacturing question - in Science and Industry [original thread]
You can start manufacturing straight away - just buy the Blueprint (BPO) from the market and off you go. To make it cost effective you'll need to do a couple of things before starting the manufacturing job: 1) Train the skill "Production Efficie...
- by Halvus - at 2008.08.18 18:48:00
|
5. Ship Invention question? - in Science and Industry [original thread]
yes. A 1-run bpc with the +9 decryptor produces a 9-run T2 bpc A max-run bpc with the +9 decryptor produces a 10-run T2 bpc You have to work out whether the extra run is worth the extra time and cost of making the max-run input bpc.
- by Halvus - at 2008.08.16 08:08:00
|
6. Hisec POS standings requirement - in Science and Industry [original thread]
It is unmodified standings of your corp, not your character.
- by Halvus - at 2008.06.28 17:01:00
|
7. How do I set up my research pos so that corpmates can't steal blueprin - in Science and Industry [original thread]
Originally by: Bartom Dekkar Originally by: Halvus You don't need Scientific Networking to do that. Yes you do. I tried it not too long ago. You need level 1 "same solar system". No you don't :P I have an un-trained alt tha...
- by Halvus - at 2008.02.15 11:14:00
|
8. How do I set up my research pos so that corpmates can't steal blueprin - in Science and Industry [original thread]
You don't need Scientific Networking to do that. If you have an office in the same system as the pos, you can remote research the blueprints if you're at the POS, even without Scientific Networking. This means you can house a couple of research al...
- by Halvus - at 2008.02.14 09:33:00
|
9. Module invention with base item - in Science and Industry [original thread]
Originally by: Mioelnir The inventory caching of pos labs got better with the last patch, but is still wacky at best. Force a session change by docking or leaving the system after filling the lab. This usually fixes it. Personally, I fill ...
- by Halvus - at 2008.02.03 10:31:00
|
10. Module invention with base item - in Science and Industry [original thread]
In my case I had N-Type Thermic Hardeners in my mobile lab, and it didn't recognise them as base items.
- by Halvus - at 2008.02.02 14:44:00
|
11. Module invention with base item - in Science and Industry [original thread]
I recently started a few invention jobs for some Armor Thermic Harderner II modules. I had a number of named thermic hardeners in the same tab of my mobile lab. However, the invention UI did not show these as available base items. It just said som...
- by Halvus - at 2008.02.02 09:58:00
|
12. Cannot establish contact with the Science & Industry facility. - in Science and Industry [original thread]
Make sure you select the correct hangar/tab when creating the job. I think the default is now "my hangar", but your bpo will be in a tab of the corp hangar in the station or pos.
- by Halvus - at 2007.12.30 10:33:00
|
13. Differences in Adv and Reg Lab - in Science and Industry [original thread]
AFAIK there is no difference in success chance for invention jobs at a POS. I have successfully invented mods in a POS for a few months now with no problems. The big advantage of the POS is making the BPCs, so you don't need to join the queues in ...
- by Halvus - at 2007.10.22 17:49:00
|
14. Building out of an assembly array.. - in Science and Industry [original thread]
This is how I do it: - Minerals go into tab A in the assembly array at the POS - BPO goes in the CORP Hangar in the station, also in Tab A - Open the Science & Industry window, and select Installations - Find your Assembly Array in the list by...
- by Halvus - at 2007.09.19 20:46:00
|
15. Which POS array is needed to manufacture T2 mods ? - in Science and Industry [original thread]
Either the Rapid or Efficient Equipment Assembly Array can be used to manufacture mods. If you're having trouble it could be due to access rights. Also, check that your blueprint and materials are in the correct tab of the assembly array. (i.e. ...
- by Halvus - at 2007.07.25 21:18:00
|
16. Trying to build, but EVE says I dont have enough materials, when I do - in Science and Industry [original thread]
Check that the minerals are in the correct tab of the manufacturing array. When you start the job you can specify the input and output tab to be used.
- by Halvus - at 2007.07.01 09:42:00
|
| Pages: [1] |
| First page | Previous page | Next page | Last page |