| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Miabio
   |
Posted - 2006.01.20 10:30:00 -
[1]
Could someone be as kind as to remind me how it goes? I am setting up a Maller again, and I forget how the Dura setup went. Thank you in advance.
|
Corrinus Amarras
|
Posted - 2006.01.20 10:40:00 -
[2]
thats what the sticky setup thread is for!
|
Miabio
|
Posted - 2006.01.20 10:43:00 -
[3]
its not in there :x
I'm using eve-search, but its not coming out in a clean fashion. Its more for historical purposes then anything else anyway. . .
|
Corrinus Amarras
|
Posted - 2006.01.20 10:49:00 -
[4]
of course its there:
http://oldforums.eveonline.com/?a=topic&threadID=138274&page=1#4
|
Sicex
|
Posted - 2006.01.20 11:11:00 -
[5]
I am not too sure how updated that DuraMaller setup is and I just recently put together a cheap, low-skill req, DuraMaller setup after reading through several Maller threads (the two previous Duramaller threads, as well).
Hi:
* 5x Medium Pulse Laser Is (Radio S crystal atm)
* 1x Nos or Smartbomb
Mid:
* Peroxide Large Battery
* Named 10mn AB <-- worth it
* Named Cap Recharger
Lo:
* 1600mm Nanofiber plating (good armor without slowing you down as much as Tungsten)
* Med Armor repper
* Heat Sink
* Energized Adaptive Nano Plating
* Cap Relay
Again, I am a 350k SP player and if I can put this together, I'm sure you can even do better. I am considering dropping the Heat Sink for a 2nd Energized Adaptive Nano which would make my lowest resist around 60%. That combined with 4.7k armor, 1800+ capacitor, and a semi-decent recharge rate (better with skills) make this a classic DuraMaller setup!
BTW, the Medium Pulse Lasers are Frigate guns, which means you won't be dishing out huge amount of damage... As I train my skills I am considering changing one... maybe 2 of the frigate guns for cruiser-sized pulse's for some extra damage. The thinking behind mounting the small pulses is that you will be able to kill frigates and drones. The lack of damage I recently had a problem with as I couldn't break the tank of an NPC Brutix and had to warp out (after trying for about 10 mins while tanking two of them!  ). I am almost sure this will change with time as I train up pulse turret skills for added damage and refire rates.
Good luck!
|
Skylar Keenan
|
Posted - 2006.01.20 12:37:00 -
[6]
My current DuraMaller setup looks like this.
It's the one I use in my quest to conquer all lvl3 missions. Proving that it IS possible to do them all in a cruiser 
High:
5x Medium Pulse Laser II
Med:
1x 10mn Afterburner II
1x Fleeting Propulsion Inhibitor
1x Large Peroxide I Capacitor Power Cell
Low:
1x Medium Armor Repairer II
2x Armor Hardener II (depends on rats)
1x Energized Adaptive Nano Membrane II
2x Capacitor Power Relay I
Works a charm. Insane resists and 136 DPS with MF crystals. Such a great cruiser!
-----------------------------------------------
|
Oberon Oblique
|
Posted - 2006.01.20 13:05:00 -
[7]
 Originally by: Skylar Keenan
High:
5x Medium Pulse Laser II
Med:
1x 10mn Afterburner II
1x Fleeting Propulsion Inhibitor
1x Large Peroxide I Capacitor Power Cell
Low:
1x Medium Armor Repairer II
2x Armor Hardener II (depends on rats)
1x Energized Adaptive Nano Membrane II
2x Capacitor Power Relay I
!
I would think you got lots of grid to spare here. You might wanna drop the nano and add a plate or add a med nos and drop a relay for a HS.
Otherwise is a duramaller baby and they are the ****nizzle of npc cruisers.
-The mind is strong and the flesh is weak, but oh the flesh... |
Frools
|
Posted - 2006.01.20 13:06:00 -
[8]
Originally by: Sicex
* 1600mm Nanofiber plating (good armor without slowing you down as much as Tungsten)
The lack of damage I recently had a problem with as I couldn't break the tank of an NPC Brutix and had to warp out (after trying for about 10 mins while tanking two of them!
not anymore, tungsten plates give both the most armour and have the lowest mass now 
 try using MF or Gamma crystals, radio sucks
|
Skylar Keenan
|
Posted - 2006.01.20 13:10:00 -
[9]
Originally by: Oberon Oblique[/quote
I would think you got lots of grid to spare here. You might wanna drop the nano and add a plate or add a med nos and drop a relay for a HS.
Otherwise is a duramaller baby and they are the ****nizzle of npc cruisers.
There is indeed plenty of PG to spare on this setup. The CPU on the other hand is rather tight. Had to remove the med nos to squeeze in the t2 hardeners, and I'd rather have resistances than lots of armor any day of the week when it comes to NPCing.
This setup allows me to permatank anything I've come across so far, apart from Tech Secrets, where I had to warp out once or twice. 
-----------------------------------------------
|
Pindaman
|
Posted - 2006.01.20 13:16:00 -
[10]
I use on my maller
5x pulse laser 1 1x knave medium NOS
1 Named afterburner 1x webber 1x capacity recharger
2x cap relay 1x 800mm plate 2x adaptive nano membrame 1x named medium armor repairer
I use it for lvl2 mission and you can do all of them without warping out (well atleast i can) and the armor repper, webber + weapons run perma with the NOS on. Without the nos you still wont encounter cap problems fast.
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |