| Pages: [1] 2 3 :: one page |
|
|
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Amthrianius
   |
Posted - 2005.02.01 21:52:00 -
[1]
Seem to have this problem only when armour hardners are on causing screen to freeze every 5 seconds unless i zoom maximum out.
Anyone else having this issue?
---------------
|
MAcheTT3
|
Posted - 2005.02.01 22:00:00 -
[2]
So that's what it is... I did notice insane lag, but didn't make the connection... 
|
Occam
|
Posted - 2005.02.01 22:29:00 -
[3]
I can confirm that at least flying the apoc equipped with the hardeners causes this. Dunno if it's tied to hardware or software though. Took the Raven out and had zero "freeze" issues.
|
Virtuozzo
|
Posted - 2005.02.02 00:03:00 -
[4]
A corp member of mine is having the same issue: hardeners active, insane lag & screen freezes (doing a general spawn in a maller ^^), also hearing the same from a few folks in Omist (including 3 ship losses due to it ..)
Cheers,
Virtuozzo |
j0sephine
|
Posted - 2005.02.02 00:52:00 -
[5]
Edited by: j0sephine on 02/02/2005 00:54:35
"Anyone else having this issue?"
Yup, lot of people. 'Tis old bug, reported multiple times, last time less than two weeks ago.
(mind you, used happen to me before but doesn't really happen anymore, so it might be issue with graphics card type and/or drivers ^^;
|
Ethidium Bromide
|
Posted - 2005.02.02 01:10:00 -
[6]
i'm having this too. started with the new patch and makes hunting a pain.
checked my GFX drivers and updated them, still the same.
and i don't even want to think about the option that an x800 xt wouldn't be able to handle eve
|
Virtuozzo
|
Posted - 2005.02.02 01:27:00 -
[7]
Well ... after having heard about it from others in corp and alliance I thought to have a go at it ... I'm no longer sure this is a graphics card related issue. The system at work had it twice out of 3 quick hunts, my laptop once out of 6, at home twice out of by now 13 .. can't put the finger on it as each system has a different graphics card. Confused. Filed a bug report though with systems details on each.
Cheers,
Virtuozzo |
Atandros
|
Posted - 2005.02.02 02:04:00 -
[8]
Goddammit, yes. 
And I've found no way to stop it so far.
|
Primer Xenius
|
Posted - 2005.02.02 03:12:00 -
[9]
Yer I came here searching for a lag post and found this. I've been hunting rats for a long time now and had no problems until this patch.
Today I patched and jumped into a system and the got periodic pauses which got worse and worse. Didn't know it was the hardeners (have 3 running).
A fix would be nice :)
"we all know CA planned to attack Xetic "when the time was right" from day1" - Lallante
|
Captin Biltmore
|
Posted - 2005.02.02 04:21:00 -
[10]
Yup, same here. After this patch I can't use armor hardeners. What he hell caused this? I'm assuming thats what the devs are saying too :).
Good luck finding a hotfix for this one guys...cause it seems really obscure.
|
|
|
Golgrath
|
Posted - 2005.02.02 07:32:00 -
[11]
Edited by: Golgrath on 02/02/2005 07:37:05
This is strange..
I was having this armor hardener lag on Sisi right before patch deployment into TQ. I was told by a BH that devs were looking at this.
After patch was applied to TQ i went in and immediatly tried it with my tempest. No lag.
But now, i get the lag on my apoc.
Either it's connected to the ship or there was a hotfix for this that somehow got 'unloaded'
edit: looks like there's a graphics bug related to it. When i activate hardeners, i get a sort of second layer of guns on my tempest. Bug reported with a screenshot.
|
Lily Savage
|
Posted - 2005.02.02 07:55:00 -
[12]
"Work around": Energised adaptive nano-plating II (or whatever the name is) instead of hardeners.
|
ShyLion
|
Posted - 2005.02.02 08:19:00 -
[13]
Have the same problem.
Was submiting bug weeks before patch.
|
Illvin Bujold
|
Posted - 2005.02.02 09:32:00 -
[14]
Edited by: Illvin Bujold on 02/02/2005 09:33:24
 Quote:
When i activate hardeners, i get a sort of second layer of guns on my tempest.
I got that as well, though I don't use hardeners. Think I was using an armor repairer. And this was a couple of hours after the latest patch.
'I was gratified to be able to answer promptly, and I did. I said I didn't know.'
ùMARK TWAIN
|
Scotari
|
Posted - 2005.02.02 11:34:00 -
[15]
Well in my case I dont see how it is a Gfx card problem.....all working fine until yesterday, but now the minute i switch on 3 hardeners the screen lags to hell and back. 10-15 second freezes are the norm
All latest drivers, with a month old Radeon X800 Pro. What with this bug and the fact I wanna fly a Megathron, I really think CCP dont want my monthly subscription
|
Bambi
|
Posted - 2005.02.02 11:50:00 -
[16]
tested last night with all 4 armor hardners and large repairers with no lag whatsoever.
A corp mate reckons its a direct-x issue and only effects Dx9 cards as mine is Dx8.
If God made us to be just like him, then God is dumb and maybe a little ugly on the side...[F.Z] |
Redundancy
|
Posted - 2005.02.02 11:54:00 -
[17]
Looking into this as a matter of urgency.
|
Virtuozzo
|
Posted - 2005.02.02 11:58:00 -
[18]
Thanks, much appreciated. Is this maybe also a matter of urgency?
Cheers,
Virtuozzo |
Jasmine Constantine
|
Posted - 2005.02.02 13:22:00 -
[19]
Edited by: Jasmine Constantine on 02/02/2005 13:36:20
I can confirm this too its been driving me nuts since last night.
I run 4 active armour hardeners on a Dominix tank and the game freezes every few seconds with the effects of all four being to make it virtually unplayable and very hazardous for npc hunting.
I cleared my cache, reinstalled eve and defragged my system to hell and back.
If this can get hotpatched as a priority I'd be very grateful since I imagine its just killed all the armour tank loadouts in eve.
PS
I am running a new Geforce card and it worked beautifully before the patch (and still does when the armour hardeners aren't running)
Star Fraction
|
Bon3s
|
Posted - 2005.02.02 13:55:00 -
[20]
Have the same problem, zooming out in a belt to max is the only way to avoid some lag atm.
And i updated my drivers too, no result.
|
|
|
Redundancy
|
Posted - 2005.02.02 13:56:00 -
[21]
Edited by: Redundancy on 02/02/2005 13:58:19
I'm evaluating a possible fix for this. Will try and keep you as updated as possible.
This is not related to drivers, or defragging, and I expect you need turrets fitted on your ship to see any effect. The more Repairers and armour hardeners you have fitted, the worse this is going to be.
|
Mithrindar
|
Posted - 2005.02.02 15:46:00 -
[22]
Last nightI had the same problem using a raven with shield hardeners during a lvl 3 pirates extravaganza. the game went into jerk-o-vision with a gurista wall in particular showing artifacts and dissapearing. logged off then back on and the problem went away. first time it's happened to me though.
|
Redundancy
|
Posted - 2005.02.02 16:19:00 -
[23]
Originally by: Mithrindar
Last nightI had the same problem using a raven with shield hardeners during a lvl 3 pirates extravaganza. the game went into jerk-o-vision with a gurista wall in particular showing artifacts and dissapearing. logged off then back on and the problem went away. first time it's happened to me though.
Shield hardeners use completely different code, so if there's a connection, it's not the one you'd first think of.
|
Illuvitar
|
Posted - 2005.02.02 16:59:00 -
[24]
Don't know if this helps:
The same thing was happening to me last night. I turned on two hardeners and lag was barely noticable. Turned on one repairer in addition to the two hardeners and lag was present but bearable. Turned on a second repairer and lag got insane. Something like 1 frame per 10-15 seconds. Zooming out seemed to help enough so that I could cope with the battle. |
Kane Jacobs
|
Posted - 2005.02.02 19:29:00 -
[25]
Its evil I tell you... EVIL !!!!
Been trying to do some npc'ing today but its rediculous, totally not playable.
_______________________________________________
|
RedClaws
|
Posted - 2005.02.02 19:35:00 -
[26]
Edited by: RedClaws on 02/02/2005 19:37:07
it's not a driver problem or anything like that. CCP programmers must have made a mistake somewhere , seems like you'll have to fly zoomed out to max for a day.
In that other thread they mentioned a "shimmer" effect on armor hardeners? I can't see it 
|
smitor
|
Posted - 2005.02.02 19:45:00 -
[27]
So this is a new thing then with the new patch ?
i had just formatted my machine and put service pack 2 on , ive reformatted tried old new sound and gfx drivers and i only get lag when in belt with npcs, seems to lock the machine for a split second every 10 seconds or so. I assumed it was a service pack 2 thing as thats the new thing i installed but i guess this is due to the new patch ?
any resolutions yet ?
|
OFRogue
|
Posted - 2005.02.02 19:46:00 -
[28]
I sent a petition and a CSR said the devs had a fix.... so what are ya'll waitin for? restart the servers and load it up.
|
Diego
|
Posted - 2005.02.02 20:02:00 -
[29]
Did a agent miss and go my apoc Blown up. real bady. But i also noted that when a Raven fired Trops the Lag got even bader. Anybody esle got that ?
|
Dark Cyraxo
|
Posted - 2005.02.02 20:07:00 -
[30]
I found the lag was more of a combo of repairers and hardeners in my case the repairers caused more lag then the harenders
|
|
|
|
|
| |
|
| Pages: [1] 2 3 :: one page |
| First page | Previous page | Next page | Last page |