| Pages: [1] 2 :: one page |
| Author |
Thread Statistics | Show CCP posts - 19 post(s) |
|
CCP Snorlax
C C P
C C P Alliance
301
   |
Posted - 2013.11.28 15:44:00 -
[1] - Quote
If you multibox and use symbolic links to set up your multiple EVE instances and your EVE client freezes frequently, especially on undocking or jumping I would like to hear from you.
There may be a bug in Windows, or possibly in Python that has to do with files in folders accessed via symlinks, but I haven't been able to work out if this is affecting the client or not. So, if the very specific condition described above applies to you, I'd like to hear from you and learn more about how you set up the symbolic links.
Either post here, or send me an EVE mail.
Thanks! |
|
Vincent Athena
V.I.C.E.
2307
|
Posted - 2013.11.29 04:36:00 -
[2] - Quote
Yes, about once a week.
Its the Mac client and I use the Mac clone maker to set up all the links for me. In general I only run the clones. I got one for each of my accounts. I only run the main instal for then you push out a patch.
Edit: A bit about the freeze. The screen stops updating and the client will not accept any user input, including the esc key. But the ship remains in space doing whatever it was doing last. For example if it was mining it continues to do so until the roid runs out or the hold fills or you kill the client. The only way to deal with the situation is to force quit the client. If the ship is in space than at that time it will do its e-warp.
http://vincentoneve.wordpress.com/ |
Darwi Hodrade
Perkone
Caldari State
0
|
Posted - 2013.11.29 13:47:00 -
[3] - Quote
I run 3 clients simultaneously through symlinks on Windows 7 64-bit and they all randomly freeze frequently (usually at least once a day). It's never simultaneous as one crashes and the other ones keep going fine.
The Eve install folder is located on a normal HDD and the 3 symlinks point to it (system is not on that drive).
Quote:Edit: A bit about the freeze. The screen stops updating and the client will not accept any user input, including the esc key. But the ship remains in space doing whatever it was doing last. For example if it was mining it continues to do so until the roid runs out or the hold fills or you kill the client. The only way to deal with the situation is to force quit the client. If the ship is in space then at that time it will do its e-warp.
Confirmed that's what happens to me too.
It seems in my case it has little to do with undocking or jumping as it usually happens while missioning.
Yesterday I got myself a SSD for games and I'm putting Eve on it tonight. I'll update if it changes anything to the crash rate. |
Vincent Athena
V.I.C.E.
2309
|
Posted - 2013.11.29 15:47:00 -
[4] - Quote
Darwi Hodrade's and my experiences are virtually the same. This is what we on the Mac forum have been calling the "Mac freeze bug". Now it seems to be just "The Freeze Bug". Welcome to my world. CCP Snorlax, you may want to review the 29 page, two year old thread about this bug over on the Mac forum. https://forums.eveonline.com/default.aspx?g=posts&t=26864&find=unread
I too will be running 3 clients and have just one freeze. It can happen any time, but seems to be most often on grid loads. Also we Mac users have found that anything else using the internet connection on your computer tends to increase the chances of a freeze. This is especially true of torrents. But web browsing can do it. PYFA fetching API data can do it.
Also: I am using a SSD, and I still get freezes.
http://vincentoneve.wordpress.com/ |
Rain6637
Team Evil
5822
|
Posted - 2013.11.29 16:32:00 -
[5] - Quote
I have 10 separate installs 
Rainfleet on Twitch |
|
CCP Snorlax
C C P
C C P Alliance
302
|
Posted - 2013.11.29 17:02:00 -
[6] - Quote
Well, after more investigation the symbolic link issue is probably a red herring.
However, I'd like to ask for your help and try out an experimental feature that may give us more info on freezes in general.
In your settings folder you should have a file called prefs.ini - it's a simple text file. Open it up in a text editor and add the line
frameTimeTimeout=30000
This sets a timeout value, in milliseconds, so that whenever the client freezes for more than this value a crash is induced. Before crashing, a file called pythonstatus.txt is written to the cache folder.
Please run with LogServer (I know, not on the Mac) and this setting enabled, then file a bug report, my name in the title, attaching the log as well as the pythonstatus.txt file. This might give me more info to work with, especially when I can correlate your description of what is going on with the dump file and the Python status.
I'm also working on improving our tools to diagnose freezes and crashes - hopefully that will also translate to a better Mac experience, even though I'm working on Windows. |
|
Vincent Athena
V.I.C.E.
2312
|
Posted - 2013.11.29 17:50:00 -
[7] - Quote
Is it worth it for Mac users to do this for you? You would still get the pythonstatus file.
http://vincentoneve.wordpress.com/ |
|
CCP Snorlax
C C P
C C P Alliance
305
|
Posted - 2013.11.29 19:42:00 -
[8] - Quote
Vincent Athena wrote:Is it worth it for Mac users to do this for you? You would still get the pythonstatus file.
It depends - I need at least to correlate the .dmp file to the pythonstatus file. The log file would tell me that, in addition to other info. You would find the .dmp file under C:/Users/username/AppData/Local/CCP/EVE on Windows - not sure where it goes on the Mac. If you can attach the dmp file along with the pythonstatus file, that would certainly help. |
|
Vincent Athena
V.I.C.E.
2313
|
Posted - 2013.11.29 23:30:00 -
[9] - Quote
Well, under
p_drive/Local Settings/Application Data/CCP/EVE
there are files with names like
ba626026-34bc-e211-98fe-a7f1d92a82c8.dmp
Is that what you need?
http://vincentoneve.wordpress.com/ |
|
CCP Snorlax
C C P
C C P Alliance
306
|
Posted - 2013.11.30 09:02:00 -
[10] - Quote
Vincent Athena wrote:Well, under
p_drive/Local Settings/Application Data/CCP/EVE
there are files with names like
ba626026-34bc-e211-98fe-a7f1d92a82c8.dmp
Is that what you need?
Yes, exactly! |
|
Caladin Brood
Dirty Rotten Scoundrel's
5
|
Posted - 2013.11.30 14:42:00 -
[11] - Quote
I run 2 clients 1 working fine the other constantly freezing and crashing every 10 minutes or so, been working fine last few days just got up today logged in per usual and constant freezing and crashing on the same one. |
Graabeerd Khagah
ImaNicePirate.com
3
|
Posted - 2013.11.30 15:11:00 -
[12] - Quote
I have Windows 8 and it does the same thing, I have both clients running and one will freeze up and says "not responding" or something similar. Usually I don't multibox but every now and then it will cause one client to freeze up and the other goes along just fine. I have an HP Pavillion G7 gaming laptop along with a 23in Samsung monitor running full screen in window mode.
Not sure about the symbolic links.... |
Captain StringfellowHawk
Garoun Investment Bank
Gallente Federation
71
|
Posted - 2013.12.01 00:53:00 -
[13] - Quote
Caladin Brood wrote:I run 2 clients 1 working fine the other constantly freezing and crashing every 10 minutes or so, been working fine last few days just got up today logged in per usual and constant freezing and crashing on the same one.
I get the same Issues on a Win 7 and a win 8.1 Machine. Not sure what causes it. I have even Ran it in a Clean Fresh installed environment and get the issue. So I know it wasnt any other programs I had on my machine. One client will drop down to 132Mb of Ram used and the other will jack up to 1.2GB of Ram used. The Second client will run without Issue but the Primary Client will get the Freezing Issues. I learned to have my Indy alt signed on Primarily and my Combat Alt Secondary and I just deal with the Indy Alt having Issues. So it is something in the client when Dual Boxing. |
Lantiane
Dragon Clan
Nulli Secunda
2
|
Posted - 2013.12.01 10:00:00 -
[14] - Quote
Darwi Hodrade wrote:I run 3 clients simultaneously through symlinks on Windows 7 64-bit and they all randomly freeze frequently (usually at least once a day). It's never simultaneous as one crashes and the other ones keep going fine. The Eve install folder is located on a normal HDD and the 3 symlinks point to it (system is not on that drive). Quote:Edit: A bit about the freeze. The screen stops updating and the client will not accept any user input, including the esc key. But the ship remains in space doing whatever it was doing last. For example if it was mining it continues to do so until the roid runs out or the hold fills or you kill the client. The only way to deal with the situation is to force quit the client. If the ship is in space then at that time it will do its e-warp. Confirmed that's what happens to me too. It seems in my case it has little to do with undocking or jumping as it usually happens while missioning. Yesterday I got myself a SSD for games and I'm putting Eve on it tonight. I'll update if it changes anything to the crash rate.
same problem here also with win7. before patch all worked fine but since patch... yeah you know.... |
Zardar
ZAR Advanced Resources
0
|
Posted - 2013.12.01 21:13:00 -
[15] - Quote
I've been having this same (new) problem the past few days while playing 2 accounts (windowed) on a DELL XPS dual core win7 machine with 12GB ram.
Main account locks up every so often, from 3-4 hours to 5 mins. Often while locking rats just after warping into a pocket.
Second / boost account not affected.
Just crashed in the middle of dread pirate scarlet. My ship got out OK, but my fleet buddy was left sweating it for a while :)
Good news is that I have logs and crash dumps, and will file those in a bug report shortly.
Z.
|
Alexa Machavela
Junkyard Doggs
Circle-Of-Two
0
|
Posted - 2013.12.02 01:20:00 -
[16] - Quote
Oddly enough, I have crashes that happen with similar problems, with 3 notable exceptions:
1) I do not multibox
2) I do not use symbolic links
3) On trying to Alt+Tab out, the game will shut down with the exception of the EVE cursor in it's last used state. It does not allow me to click on desktop icons, and I always end up having to Alt+Tab+Delete my way to a forced restart.
This has happened 3-5 times a day (at least on days when I logged in for more than a few minutes) since the Rubicon patch.
Win7 on I-made-it-myself.
|
Amma Cha'tur
Hedion University
Amarr Empire
0
|
Posted - 2013.12.02 12:44:00 -
[17] - Quote
I often run two accounts from one launcher. Very rarely get disconnected, but both accounts get disconnected in quick succession.
The past week I have :-
#one account freezes for what seems like forever then disconnects
#second account is totally unaffected even shows me1 just went offline
#at worst it is only enough time to log back on before I'm logged off again (me2 still unaffected)
#happens about 70% at gates but also mid pve mission even docked up
#been happening for about 6/7 day's now
#Windows 7, gtx660, plenty of ram, i5 3570k.
Where can I get more Info on the logger? I have no idea how to use it. |
|
CCP Snorlax
C C P
C C P Alliance
309
|
Posted - 2013.12.02 12:47:00 -
[18] - Quote
Amma Cha'tur wrote:
Where can I get more Info on the logger? I have no idea how to use it.
https://wiki.eveonline.com/en/wiki/Logserver |
|
Ryan Farmern
Rhongomiant Legion Industries
The East India Co.
2
|
Posted - 2013.12.02 15:53:00 -
[19] - Quote
I run a corp of multiboxers (Note: 10-20 clients running per person) and ALL I've heard after the patch is their clients freezing.
I'm sending this forum post to them now. |
Amma Cha'tur
Hedion University
Amarr Empire
0
|
Posted - 2013.12.02 18:40:00 -
[20] - Quote
After googling symbolic links I remembered a couple of days ago when I booted up my computer, the shortcut to the EVE launcher and the shortcut pinned to my taskbar showed as default icons.
I tried to change the icon back to the eve.exe icon but it kept telling me it couldn't find the target or something.
deleting and recreating a shortcut sorted it. |
Amma Cha'tur
Hedion University
Amarr Empire
0
|
Posted - 2013.12.02 22:10:00 -
[21] - Quote
Well, I play for a while only to catch another bug. (twitchy screen/odd graphics after jumping)
Bug report won't submit with uploaded files and just throws me an error must have occurred screen.
Logged back on to resume the game, first stargate......and.....freezes..........come on.........unbelievable..........what are the chances.............disconnected.
|
Chalithra Lathar
Rhongomiant Legion Industries
The East India Co.
6
|
Posted - 2013.12.02 22:16:00 -
[22] - Quote
I haven't had many issues with freezing, but I have corp members that do. I occasionally have a client that crashes when logging in, or a black screen when undocking. Haven't had any problems jumping through gates.
I am fairly certain that ISboxer uses symlinks to create seperate settings files for each client, You should probably contact Lax, as most everyone I know that multiboxes uses ISboxer. |
Ruskarn Andedare
Lion Investments
287
|
Posted - 2013.12.02 22:36:00 -
[23] - Quote
Had a client freeze that locked me from my PC a few minutes ago - only one client running |
Vincent Athena
V.I.C.E.
2338
|
Posted - 2013.12.06 21:58:00 -
[24] - Quote
CCP Snorlax wrote:.....
In your settings folder you should have a file called prefs.ini - it's a simple text file. Open it up in a text editor and add the line
frameTimeTimeout=30000
This sets a timeout value, in milliseconds, so that whenever the client freezes for more than this value a crash is induced. Before crashing, a file called pythonstatus.txt is written to the cache folder.
.......
I added that line. Last night I got a freeze. But the client did not crash and no files got written. I waited for about half an hour. The prefs.ini files look like
bitsCancelled=1
clusterMode=LOCAL
clusterName=LOCALHOST@NODOMAIN
debug=0
decimal=.
digit=,
eulaagreed=0
host=0
inputhost=localhost
languageID=EN
machoNet.acceptThreadCount=20
newbie=0
port=26000
rebootReason=connection lost
rebootTime=130302129936291412
showHardcodedStrings=0
frameTimeTimeout=30000
Any ideas?
http://vincentoneve.wordpress.com/ |
Jarod Garamonde
Sardaukar Merc Guild
General Tso's Alliance
838
|
Posted - 2013.12.07 07:57:00 -
[25] - Quote
CCP Snorlax wrote:If you multibox and use symbolic links to set up your multiple EVE instances and your EVE client freezes frequently, especially on undocking or jumping I would like to hear from you.
There may be a bug in Windows, or possibly in Python that has to do with files in folders accessed via symlinks, but I haven't been able to work out if this is affecting the client or not. So, if the very specific condition described above applies to you, I'd like to hear from you and learn more about how you set up the symbolic links.
Either post here, or send me an EVE mail.
Thanks!
CCP Snorlax, I posted a thread about recent client hangs, earlier, with no response.
I'm experiencing partial freezes, but mostly just when I'm running a single client... it seems to happen far less for me when I using both accounts.
That moment when you realize the crazy lady with all the cats was right... |
|
CCP Snorlax
C C P
C C P Alliance
310
|
Posted - 2013.12.07 13:33:00 -
[26] - Quote
Vincent Athena wrote:CCP Snorlax wrote:.....
In your settings folder you should have a file called prefs.ini - it's a simple text file. Open it up in a text editor and add the line
frameTimeTimeout=30000
This sets a timeout value, in milliseconds, so that whenever the client freezes for more than this value a crash is induced. Before crashing, a file called pythonstatus.txt is written to the cache folder.
....... I added that line. Last night I got a freeze. But the client did not crash and no files got written. I waited for about half an hour. The prefs.ini files look like bitsCancelled=1 clusterMode=LOCAL clusterName=LOCALHOST@NODOMAIN debug=0 decimal=. digit=, eulaagreed=0 host=0 inputhost=localhost languageID=EN machoNet.acceptThreadCount=20 newbie=0 port=26000 rebootReason=connection lost rebootTime=130302129936291412 showHardcodedStrings=0 frameTimeTimeout=30000 Any ideas?
Was the client completely frozen? Nothing moving on the screen? If so, the timeout should have kicked in, so I'm starting to think you are experiencing something different. If we're still rendering frames but somehow not responding to input that could explain this. |
|
|
CCP Snorlax
C C P
C C P Alliance
310
|
Posted - 2013.12.07 13:38:00 -
[27] - Quote
Jarod Garamonde wrote:
CCP Snorlax, I posted a thread about recent client hangs, earlier, with no response.
I'm experiencing partial freezes, but mostly just when I'm running a single client... it seems to happen far less for me when I using both accounts.
Hey, give me a break - you post late on a Friday afternoon and complain about no response at noon on Saturday!
Anyway, I've responded now :) |
|
Vincent Athena
V.I.C.E.
2340
|
Posted - 2013.12.07 14:44:00 -
[28] - Quote
CCP Snorlax wrote:Vincent Athena wrote:CCP Snorlax wrote:.....
In your settings folder you should have a file called prefs.ini - it's a simple text file. Open it up in a text editor and add the line
frameTimeTimeout=30000
This sets a timeout value, in milliseconds, so that whenever the client freezes for more than this value a crash is induced. Before crashing, a file called pythonstatus.txt is written to the cache folder.
....... I added that line. Last night I got a freeze. But the client did not crash and no files got written. I waited for about half an hour. The prefs.ini files look like bitsCancelled=1 clusterMode=LOCAL clusterName=LOCALHOST@NODOMAIN debug=0 decimal=. digit=, eulaagreed=0 host=0 inputhost=localhost languageID=EN machoNet.acceptThreadCount=20 newbie=0 port=26000 rebootReason=connection lost rebootTime=130302129936291412 showHardcodedStrings=0 frameTimeTimeout=30000 Any ideas? Was the client completely frozen? Nothing moving on the screen? If so, the timeout should have kicked in, so I'm starting to think you are experiencing something different. If we're still rendering frames but somehow not responding to input that could explain this.
Nothing was moving on the screen, and the client was not accepting any input. No chat, no camera wobble, no movement at all. Well, the mouse pointer moves. I was running 3 clients in a mining fleet, and it was the orca that froze. The other two ships could still put ore into the orca, and the orca remained in place, and in fleet, until I force quit the frozen client.
http://vincentoneve.wordpress.com/ |
|
CCP Snorlax
C C P
C C P Alliance
311
|
Posted - 2013.12.07 15:20:00 -
[29] - Quote
Vincent Athena wrote:CCP Snorlax wrote:
Was the client completely frozen? Nothing moving on the screen? If so, the timeout should have kicked in, so I'm starting to think you are experiencing something different. If we're still rendering frames but somehow not responding to input that could explain this.
Nothing was moving on the screen, and the client was not accepting any input. No chat, no camera wobble, no movement at all. Well, the mouse pointer moves. I was running 3 clients in a mining fleet, and it was the orca that froze. The other two ships could still put ore into the orca, and the orca remained in place, and in fleet, until I force quit the frozen client.
I need to verify that the timeout works as it should on the Mac - it should have kicked in here. I'll have someone run some tests for me on Monday.
Btw, do you play with audio on? Does it make any difference if you disable audio? |
|
Vincent Athena
V.I.C.E.
2341
|
Posted - 2013.12.07 21:47:00 -
[30] - Quote
CCP Snorlax wrote:Vincent Athena wrote:CCP Snorlax wrote:
Was the client completely frozen? Nothing moving on the screen? If so, the timeout should have kicked in, so I'm starting to think you are experiencing something different. If we're still rendering frames but somehow not responding to input that could explain this.
Nothing was moving on the screen, and the client was not accepting any input. No chat, no camera wobble, no movement at all. Well, the mouse pointer moves. I was running 3 clients in a mining fleet, and it was the orca that froze. The other two ships could still put ore into the orca, and the orca remained in place, and in fleet, until I force quit the frozen client. I need to verify that the timeout works as it should on the Mac - it should have kicked in here. I'll have someone run some tests for me on Monday. Btw, do you play with audio on? Does it make any difference if you disable audio?
Audio was disabled. I normally play sound off. I think once I got a freeze sound on. The music starts skipping, and stops altogether.
http://vincentoneve.wordpress.com/ |
| |
|
| Pages: [1] 2 :: one page |
| First page | Previous page | Next page | Last page |