Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30 40 .. 41 :: one page |
|
Author |
Thread Statistics | Show CCP posts - 6 post(s) |

Tazmikella
Gallente MicroCon Enterprises
|
Posted - 2009.12.02 23:43:00 -
[601]
Originally by: Hardon Thicke yeah.........I see the Dominion screen...goes black, as it seems to be going to the sign in screen. But no. That's it. When I have to Control-Alt-Delete to get out of the mess....the task man. sez EvE Not Responding.
Will CCP prorate my account until this is fixed???? I see that I am NOT the only one with this problem....among the many.
HT
Yes, welcome to "among the many" still waiting for some word on the graphics issue hanging at the black screen/log-in screen. Tazmikella Director MicroCon Enterprises |

RangoDango
|
Posted - 2009.12.02 23:46:00 -
[602]
just noticed in my system overview, an entry that has followed me though so far 3 gates, distance does not change at all, when i try to select it, it says no item selected
distance is reading 38km, name is Tret Cross, type is listed as Stabber
|

Discrodia
Gallente Experimental Horizons
|
Posted - 2009.12.02 23:48:00 -
[603]
Originally by: RangoDango just noticed in my system overview, an entry that has followed me though so far 3 gates, distance does not change at all, when i try to select it, it says no item selected
distance is reading 38km, name is Tret Cross, type is listed as Stabber
Reload your overview, known bug.
Originally by: CCP Zymurgist Locked, thread is filled with trolling.
|

Guyde
Arms For The Poor
|
Posted - 2009.12.03 00:25:00 -
[604]
I can no longer modify prices on buy orders unless I am in station with them.
My relevant skills: Daytrading III Marketing III Procurement III
I don't have Visibility trained, but it shouldn't be necessary for modifications.
|

Usagi Tsukino
Miyazaki Zaibatsu APEX Conglomerate
|
Posted - 2009.12.03 00:38:00 -
[605]
Originally by: Usagi Tsukino Replying so CCP knows this isn't just on one kind of machine. 
I also cannot get into the game due to the black screen. What's odd is that yesterday I patched fine, and ran both my clients (windowed, via EVE Mover) without (major) issue. (I did have the FPS drop that a lot of the ATI people are talking about. Has NVidia paid off CCP?!?)
In fact I was on earlier today, however I found that I could not start my second client till I closed my first one, and vice versa. Eventually after switching a couple of times, I became unable to open either.
I cleared the cache, and that did nothing but assure me of a few hours of reorganizing safespots. 
Running XP MCE SP3, 2.08GHz, 2GB RAM ATI Radeon HD 3850 AGP 512MB card.
Hate to quote myself, but FWIW devs, after a fresh install, I still have this issue, so I ran log server and submitted a bug report for you guys in hopes that it speeds up your fixing of this.
An icy weekend may be coming and if I am suck at home, I sure as hell don't want to spend it cleaning or doing something just as productive... 
TYVM. ---
|

Jalson
Amarr Blueprint Haus
|
Posted - 2009.12.03 00:48:00 -
[606]
When anchoring containers.....there is no longer a visual cue that the container is anchered. There used to be a "^" under the container to show it being anchored.
btw.....LOVE being able to post this from in game....WOOT!!!
|

Erika Bronz
Gallente The Wyld Hunt Saints Amongst Sinners
|
Posted - 2009.12.03 00:58:00 -
[607]
If an accelerator gate triggers a special game music, music player will make a full stop after each and every song afterwards.
Client does not seem to remember chat channel passwords after a disconnect.
|

Dav Varan
|
Posted - 2009.12.03 01:22:00 -
[608]
Getting major conection issues atm. Cant stay logged into game , even website and ping keep failing.
Other friends gettin kicked simultaneously , so i dont think its my internet.
Ping statistics for 87.237.39.197: Packets: Sent = 151, Received = 139, Lost = 12 (7% loss), Approximate round trip times in milli-seconds: Minimum = 15ms, Maximum = 27ms, Average = 15ms
|

brutoid
Caldari
|
Posted - 2009.12.03 01:24:00 -
[609]
Originally by: Dav Varan Getting major conection issues atm. Cant stay logged into game , even website and ping keep failing.
Other friends gettin kicked simultaneously , so i dont think its my internet.
Ping statistics for 87.237.39.197: Packets: Sent = 151, Received = 139, Lost = 12 (7% loss), Approximate round trip times in milli-seconds: Minimum = 15ms, Maximum = 27ms, Average = 15ms
Experiencing the same. 
|

Tora Toga
The Abyssmal Spire Independent Faction
|
Posted - 2009.12.03 01:32:00 -
[610]
Um...i am bit of a loser with computers...I have a question.Do you download Dominion or is it done automaticly. I managed to get to the normal apocrypha home page and I took 2 hours to download some patch and now I cant get anywhere. I need help. It might be something obvious.
|
|

Tazmikella
Gallente MicroCon Enterprises
|
Posted - 2009.12.03 01:35:00 -
[611]
Originally by: Barakkus
Originally by: Hector Eriaggan I am also using an ATI card and experiencing some problems (the white rectangle upon the fitting window). My problem is, I can't update my drivers since I have a Dell Laptop computer, and I am supposed to get the drivers from them. Any driver I try to get from elsewhere won't install, saying it is does not fit my system. Anyone knows how to bypass that manufacturer restriction ?
If it's an integrated video card, you can't. If the card is a stand alone you should be able to just download the latest catalyst from ati and it should install.
Great, so what do you do when you can't upgrade to the latest driver? I download the latest driver for my Dell Vostro 1400 from Intel .5209 version and says it does not fit my system; so it won't let me install the latest driver. So I download the latest drive from my manufacturer Dell .4859 version and still get the black screen. Guess I need to wait for CCP to fix Eve for us "graphic issue" people that can't load past the splash screen :(. Tazmikella Director MicroCon Enterprises |

9H03N1X
|
Posted - 2009.12.03 01:36:00 -
[612]
Not sure if this bug has been reported yet,
Members list in the Corp button showing grossly wrong information, I was only corpie online yet members list showed nearly the whole corp as 'online'
p.s. using windows client
|

Einear Lightfingers
|
Posted - 2009.12.03 01:54:00 -
[613]
Setting corp tax to 0% and back to 10% did not resolve the 50% tax on bounties in the corp wallet. This is still an issue. In the meantime I am setting my corp tax to 0% as it is better for the corp members to get the isk then Concord....
|

Ishmael WH
modro
|
Posted - 2009.12.03 01:57:00 -
[614]
Originally by: Ishmael WH
Quote: I am getting this. Saw it happened to people with Apoc. but did not happen with me. I can't even get to the log in screen.
Quote:AppName: exefile.exe AppVer: 6.20.1.51847 ModName: _audio2.dll ModVer: 6.20.1.49212 Offset: 0004f454
I have cleared my cache and everything. Little help please
Manual patched it and failed. Uninstalled and reinstalled and failed. Wouldn't mind I little bit of help.
I have never had a problem with eve before and I have been playing for over four years. This is really agrivating.
I have run through everything I can possibly think of and just wondering if anyone else is having this problem and how they fixed it. _______________________________________________
|

Barakkus
Caelestis Iudicium
|
Posted - 2009.12.03 02:35:00 -
[615]
They should give out a free day or something on your sub if you go test stuff for them on sisi, that way less of these problems occur next time and they get more diversity in the hardware being used to test the xpacs ;)
Sux, but I kinda gave up on trying to play for the next few weeks since things are kinda messed up all over the place...hopefully it smoothes out before my next vacation at the end of the year :)
|

Coldwyn
Abrucco Cold Fusion.
|
Posted - 2009.12.03 02:51:00 -
[616]
Eve just made me jump. No Sound. I play in total silence even as sound and voice are enabled, but both donŠt seem to work on my Windows 7 Notebook. Then, out of the blue, it plays the turret firing sound for two salvoes, falling silent again afterwards.
Job not-so-well done, ccp 
|

Julia BumLuving
|
Posted - 2009.12.03 03:00:00 -
[617]
Originally by: Aloriate OK guys, i think I have found a solution to the Mobile Intel(95) 965 Express Chipset Family graphics issue.
1. Get the latest drivers from Intel here Intel Drivers
2. Once you get past the splash screen, immediately type the ESC key and set the graphics to all low.
I have done this on my DELL Vostro and it seems to work. The problem is that the graphics chip is overloaded from the game causing the igxprd32 driver to fail and lock the system. If this chip is over stressed for too long, the motherboard could be damaged according to several troubleshooting site. Apparently, WoW also had this problem and a few other MMO's.
Yes, exactly. My computer just crashed due to igxprd32 failure after 20mins log-in in station.
The screen resolution becomes extremely low after the crash and error reports show on the
screen. Does anyone have any solution for this on 965 chipsets? In game graphic settings has
already been minimized to low.
|

Zanzbar
|
Posted - 2009.12.03 03:07:00 -
[618]
my client crashes now whenever i try to join voice or view the sound options while in game.
|

Scythius Howe
Amarr
|
Posted - 2009.12.03 03:16:00 -
[619]
Originally by: jcfugger Hi, Dominion downloaded just fine and worked for about 30min. Then, I received a "no connection to server" message and the screen froze. I restarted my computer and ever since I can't get back to the logon screen. Mac user here...
Same here - Mac user and exact same problem. Glad to see I'm not the only one.
|

Manxe Kitairn
|
Posted - 2009.12.03 03:18:00 -
[620]
I also have a strange white bar in the Fittings screen. 
|
|

Ryel Theon
Epiphyte Mining and Exploration Majesta Empire
|
Posted - 2009.12.03 03:19:00 -
[621]
Edited by: Ryel Theon on 03/12/2009 03:22:13 Edited by: Ryel Theon on 03/12/2009 03:21:28
Originally by: Kalistonius II Patch worked fine downloaded to a Mac Tuesday at approx. 24:00 evetime. Played for bout 3 hrs then my socket closed. After that I couldnt get my client to start back up. Tried restarting twice and complete system shutdown once. This morning I trashed my client after trying to log a fourth time and downloaded a brand new client. Now when I start the client all I get is the Dominion Splash Window and thats it... no log in screen, nothing. Tried to restart and attempt again. Nothing. Hope we can get this problem resolved.
Cheers, Kali II
This identical issue happened to me, also on a Mac (10.6.2, recently purchased unibody macbook pro, 8gb ram). Also after about 3 hrs of game play in a single session. I'd had several previous shorter sessions without problems.
My window filled with socket closed dialogs with debugging code in each of them (sorry I didn't copy it down). These occurred while I was running a plex, was locking a target, selected another target and activated a mod, and immediately when I clicked on the mod, the error happened.
Upon restart, the dominion splash window comes up (and stays up for longer than normal) and then it goes away and nothing else happens. The application is running but cannot be Quit. It must be Forced Quit. Problem persists after a system reboot. And the application itself, if it was running when I attempted to shutdown would cancel the shutdown (MacOS reported that the application EVE Online cancelled the restart).
I'm downloading a fresh copy of the client now but frankly I'm not hopeful given what I've read from others who have this problem.
Has anyone found any workarounds for this? I don't see anything like this in the known issues list but multiple people are clearly having it on Mac. Any suggestions CCP?
--Ryel
|

CavoFury1
|
Posted - 2009.12.03 03:22:00 -
[622]
Fleet finder/Cyno..
- Can you PLEASE set the Cyno beacon so it's broadcast to all instead of up or squad or whatever it's set at as a default now. - Can you PLEASE show the system the cyno is in in the cyno broadcast. Yes you can just right click on the can disply, but people have been ingrained to Broadcast, and when you have multiple cyno's up, all it shows is the char name. LOCATION PLEASE..
|

Manxe Kitairn
|
Posted - 2009.12.03 03:44:00 -
[623]
AFTER READING THESE POSTS I WONDER THAT CCP HAS JUST GONE TOO FAR. THIS IS A BUGGY UPDATE. IT WAS NOT TESTED WELL ENOUGH ON CONFIGURATIONS THAT A SIGNIFICANT NUMBER OF CLIENT COMPUTERS ARE RUNNING.
WE NEED A REVOLUTION. IF ENOUGH CUSTOMERS JUST STOP PAYING CCP BECAUSE THEY CANT PLAY, OR CANT PLAY WITH SATISFACTION, THEN MAYBE THEY WILL SIT UP AND PAY ATTENTION !!
I CAN START WITH 3 ACCOUNTS. 
Manxe, Lup Mauv, Justari
|

2chivi
|
Posted - 2009.12.03 04:17:00 -
[624]
ok... I've been trying to solve this for the past 8 hours.. i just got it 
This happened after the dominion patch
i had the problem of the splash screen showing up.. then nothing happens.. it just disapears.
I looked down and saw my computer clock was set at like 2030 for some god forsaken reason... i changed it back to 2009.. and it works
|

Zathra'as
Amarr
|
Posted - 2009.12.03 04:30:00 -
[625]
Originally by: Manxe Kitairn CCP HAS JUST GONE TOO FAR. THIS IS A BUGGY UPDATE. IT WAS NOT TESTED WELL ENOUGH ON CONFIGURATIONS THAT A SIGNIFICANT NUMBER OF CLIENT COMPUTERS ARE RUNNING. WE NEED A REVOLUTION.
I didn't see you on Singularity testing it out.
This may or may not be because I wasn't on singularity testing it out.
In unrelated news, I'm still not able to get past the splash screen. 'Ta.
|

Swidgen
|
Posted - 2009.12.03 04:46:00 -
[626]
Open star map with F10. Right-click and context menu pops up. That's fine, but when you right-click and HOLD the button down to drag the map around you should NOT get the context menu when you release the button. Somehow the fact that the map is being repositioned isn't being registered, and the menu pops up regardless.
A small annoyance compared to all the ATI = fail problems people have. FWIW, nVidia = win
|

Woodwraith
Prophets Of a Damned Universe
|
Posted - 2009.12.03 04:53:00 -
[627]
Originally by: 2chivi ok... I've been trying to solve this for the past 8 hours.. i just got it 
This happened after the dominion patch
i had the problem of the splash screen showing up.. then nothing happens.. it just disapears.
I looked down and saw my computer clock was set at like 2030 for some god forsaken reason... i changed it back to 2009.. and it works
 Comps in the bedroom with a sleeping monster but ill try it out first thing in the morning. |

Don Pellegrino
Helljumpers
|
Posted - 2009.12.03 04:59:00 -
[628]
When setting up a Manufacturing job in a POS (dont know about other kinds of jobs or at stations), pressing Enter instead of clicking OK will freeze the client until you click on OK.
|

Woodwraith
Prophets Of a Damned Universe
|
Posted - 2009.12.03 05:07:00 -
[629]
Originally by: Don Pellegrino When setting up a Manufacturing job in a POS (dont know about other kinds of jobs or at stations), pressing Enter instead of clicking OK will freeze the client until you click on OK.
Yeah thats been reported, hopefully theyll sneak the fix in tomorrow morning with the point release |

Steely Dhan
Perkone
|
Posted - 2009.12.03 05:49:00 -
[630]
Originally by: Mexbrutor Edited by: Mexbrutor on 02/12/2009 16:49:36 Fitting Screen cpu& power readout missing:
There is no cpu or power readout so can not tell if module will fit or not .
Fitting Screen
anyone else getting this?
.
|
|
|
|
|
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30 40 .. 41 :: one page |
First page | Previous page | Next page | Last page |