| Pages: 1 2 3 4 [5] 6 7 8 9 10 11 .. 11 :: one page |
| Author |
Thread Statistics | Show CCP posts - 7 post(s) |
Dimitrios Bekas
Brave Newbies Inc.
Brave Collective
1
   |
Posted - 2015.01.05 23:27:13 -
[121] - Quote
Rixx Javix wrote:CCP karkur wrote:Just starting the expectations management  : At this point it's just experimental, currently being worked on as a side project, but we'd love to get your input and feedback early so we're reaching out to you now  . It's not been formally "planned" or anything, but we are very interested in it, and looks like you guys are too Even better. Then I will make the following suggestion. Before implementing any "tweaks" to the current fitting window, perhaps a better next step would be to step back and take a fresh look at the entire concept of a "fitting window". As others have noted, the current window design is essentially a revised and revised version of the original pop-up window that has been made to look better and better over the last decade. Perhaps we should be asking, do we even need a pop-up window anymore? Do we need a window whose largest section is a 3d version of the ship most likely already behind it? Perhaps the same functionality (and more) could be obtained by UI elements that hover over the ship already in our hangar? Instead of a pop-up window, perhaps we can design something more elegant and incorporated into the design of the hangar, around the ship already floating there. I for one would much rather see a more integrated solution, more tastefully designed, than just more features loaded into another revision of the fitting window. Just a thought since it seems we have the time.
Damn right !!! maybe a new Fitting Window which shows LESS 3D Model of the Ship and more Infos and Options and everything in the new Design of the UI.
|
Desert Ice78
Gryphons of the Western Wind
443
|
Posted - 2015.01.05 23:31:53 -
[122] - Quote
You had my attention.
CCP Sharq wrote:closer to 3rd party programs like EFT and Pyfa.
Now you have my interest.
I am a pod pilot:
http://dl.eve-files.com/media/corp/DesertIce/POD.jpg
CCP Zulu: Came expecting a discussion about computer monitors, left confused.
|
Raging Beaver
Wildly Inappropriate
Goonswarm Federation
44
|
Posted - 2015.01.05 23:57:04 -
[123] - Quote
Please fix the displayed drone DPS (or at least make it so that whan a number is displayed, you actually can see which drones are taken into account in the calculation).
Please give us the ability to rearrange the already fitted modules with specific restrictions (launchers/turrets, damage control, reactive armor hardeners etc. ) so that you can move - for instance - the damage control to a different slot without unfitting it and then fitting it again.
The most beautiful thing I could imagine would be the ability to buy and fit a ship from a saved fitting/quickbar with 1-2 clicks. A dialog box could appear showing which modules are missing (taking the assets in the current station into account) and available/unavailable in market (something like multi-sell), showing their prices. After accepting, the modules would be fitted to a ship automatically. This is probably more related to market than fitting though. |
Bob Maths
EVE University
Ivy League
22
|
Posted - 2015.01.06 00:00:07 -
[124] - Quote
Get rid of RIGHT CLICK FIT or drag-drop, have a little button popup next to the icon or in the corner of the icon to fit (or just have it included) quickly on a single click. |
Petrified
Old and Petrified Syndication
TOG - The Older Gamers Alliance
202
|
Posted - 2015.01.06 00:03:11 -
[125] - Quote
This would be a magnificent start to improving the usefulness of the fitting window.
To be able to try a fitting out even if you do not have the modules.
To see how modules requiring activation effect the ship prior to undocking or setting them in place.
To have more reliable information period, would be a great thing.
|
ktown Hekard
Immortalis Fratres Vacui
Legio immortales CXCI
60
|
Posted - 2015.01.06 00:22:47 -
[126] - Quote
YaY
Nuff Said |
Aareya
TNT Logistics and SRP
Tactical Narcotics Team
39
|
Posted - 2015.01.06 00:29:06 -
[127] - Quote
CCP Explorer retweeted
B+íra / CCP karkur @CCP_karkur
hey #tweetfleet, check out this thread and tell us what you'd like to see :)
forums.eveonline.com/default.aspx?gGǪ
Darn you CCP Explorer. Always being so useful :)
Suggestion: Improved relation between Saved Fittings and Contracts.
Details: Currently, we have the ability to sell a fitted ship via contract (Item Exchange). However, what if we could setup a WTB contract using a Saved Fitting. Maybe you setup an Item Exchange and where you add the items, you drag in a Saved Fitting. Then players can meet that contract by providing the fitted ship.
Usage scenario:
Put fitted ship on contract for player to purchase
Put WTB contract with fitted ship
Player buys ship, flies in fleet
Player survives, ship doesn't blow up
After fleet, player opens the WTB contract and accepts to give back the fitted ship
Ship is now available to be sold on contract again
Twitter:-á-á @AareyaEVE
|
Saisin
State War Academy
Caldari State
203
|
Posted - 2015.01.06 00:31:00 -
[128] - Quote
Congrats for the initiative.
One thing I'd like to see is the ability to filter modules based on the current remaining power grid, CPU, calibration ect of the ship currently being fit, so as to only see all the modules that can still be fitted in the current state of my ship fitting.
"surrender your ego, be free". innuendo.
solo? There is a new hope...
|
d0cTeR9
Astro Technologies
Apocalypse Now.
26
|
Posted - 2015.01.06 00:36:41 -
[129] - Quote
LONG overdue. |
Mara Rinn
Cosmic Goo Convertor
Cosmic Consortium
5667
|
Posted - 2015.01.06 00:43:54 -
[130] - Quote
I would like the ability to save partial fittings. Thus, as a mission run er levelling my Raven, I can select to just change the hardeners instead of having three different fittings for Worlds Collide. One base fitting for "MJD cruise sniper" along with "three mid EM/therm buffer shield tank". I can then mix and match the tank with, say, "AB torpedo brawler".
When applying a fitting that includes charges in the cargo hold, I would like the fitting tool to remove stuff from the cargo hold that isn't on the list. Thus when I head out for Buzz Kill I don't have to manually remove the Mobile Depot and Mjolnir Fury Cruise Missiles that I used from a previous mission to make room for the nova cruise missiles I actually wanted. And I don't have to double back to base when forgetting the scientist during The Anomaly. Or the Gate Key for Dread Pirate, or the Angel Diamond Tag for AE4.
Day 0 Advice for New Players
|
Sirran The Lunatic
SniggWaffe
WAFFLES.
14
|
Posted - 2015.01.06 00:48:40 -
[131] - Quote
EFT/Pyfa features.... IN-GAME?
DO WANT.
All I can say is (and I highly doubt ccp is in any way unfamiilar with the 3PPs) do some research into the features each has and implement them.
Main thing I fear would be overlooked:
1) different charge effects (scripts, cap boosters)
2) drugs
3) boosting effects (links)
4) implants (the ability to plug sim-implants to round out your fit)
5) remote boosting effects (resebo, cap xfer, shield xfer, etc)
This would make my 2015. Plz oh plz ccp.
Edit: With this, the only thing Pyfa/EFT would have over in-game fittings would be the ability to switch characters to see how they work for alts. *****HINT HINT**** |
Mara Rinn
Cosmic Goo Convertor
Cosmic Consortium
5667
|
Posted - 2015.01.06 00:50:41 -
[132] - Quote
Rixx Javix wrote:Do we need a window GǪ
I agree. We already have the ship model in the hangar, on the hangar console in CQ, and on the table in the lounge in CQ.
Day 0 Advice for New Players
|
Mara Rinn
Cosmic Goo Convertor
Cosmic Consortium
5667
|
Posted - 2015.01.06 00:53:52 -
[133] - Quote
Not related to fitting window directly, but the ability to choose a fitting for a ship from the ship hangar would be nice.
- as a capsuleer recently reappearing in my home station due to being podded
- i would like to be able to activate and fit a ship as quickly as possible
- so that i can get back to pew pew (substitute whatever part of the game you find most interesting)
Day 0 Advice for New Players
|
Mara Rinn
Cosmic Goo Convertor
Cosmic Consortium
5667
|
Posted - 2015.01.06 00:56:28 -
[134] - Quote
If the current fitting matches one or more saved fittings, I would like to know. Even better, if the current fitting uses lower/higher meta items than the ones in a saved fitting, let me know of those saved fittings too.
If I apply a fitting based on T2 modules, allow me to use non-T2 alternatives for the ones I don't have the skills to use right now.
Day 0 Advice for New Players
|
Joelleaveek
Center for Advanced Studies
Gallente Federation
265
|
Posted - 2015.01.06 01:30:49 -
[135] - Quote
Would be great to be able to manage drone groups without undocking. |
Jenshae Chiroptera
The Volition Cult
722
|
Posted - 2015.01.06 01:56:18 -
[136] - Quote
Large cans get a "Add this fitting" button and we can just click whole fittings into ships after splitting the modules and shipping them.
CSM Ten movement for change.
CCP - Building ant hills and magnifying glasses for fat kids.
Status: Rabid carebear
Blog
|
Burl en Daire
M.O.M.S. Corp
104
|
Posted - 2015.01.06 02:06:57 -
[137] - Quote
AAR with and without paste and modules that can overheat with and without heat.
Estimated price of fit.
I would like to see a buy fit button but it may be difficult if everything isn't in one station.
Being able to move drones into a category while in station.
Allow us to setup the module part of the window while in station so we don't have to do it while undocked.
If in fleet display with and without boosts.
For the most part all the stuff everyone else in the thread has asked for.
Yesterday's weirdness is tomorrow's reason why.
Hunter S. Thompson
|
Captain StringfellowHawk
Forsaken Reavers
180
|
Posted - 2015.01.06 02:10:05 -
[138] - Quote
Why is this even being discussed.. DO IT! |
Meyr
Destructive Influence
Northern Coalition.
382
|
Posted - 2015.01.06 02:27:38 -
[139] - Quote
Is there any way of grouping drones before undocking? |
Jack Tronic
borkedLabs
232
|
Posted - 2015.01.06 02:58:20 -
[140] - Quote
1. Indirectly related to fitting but will help with the capacitor estimation. Add a time of capacitor remaining with the current active modules. This can be on the ship capacitor tooltip itself rather than the fitting window. But this will fix the fact that the worst case capacitor estimate is generally worthless for PVP.
2. Show actual align time instead of mass & interia to enter warp from 0 m/s. Mass & inertia give very little sense of how the ship will handle. i.e. there is zero reference point provided.
3. Fix moving modules between slots that have a limit 1 restriction. i.e. if you try and move an damage control from one low slot to another the game will reject it and say you already have a damage control fitted. This is beyond ********. Moving modules between slots is legitimate when rearranging for optimal heat absorption.
4. Show how heat damage will spread to modules? this could be useful when arranging modules to maximize lifetime of modules under long heat |
Daichi Yamato
Xero Security and Technologies
2111
|
Posted - 2015.01.06 03:39:39 -
[141] - Quote
Drone stats
Multi/mass-fit (right click ship stack, fit from saved fittings or something)
can we also label fittings like we label mails and contacts?
EVE FAQ "7.2 CAN I AVOID PVP COMPLETELY? No; there are no systems or locations in New Eden where PvP may be completely avoided" "So it will be up to a pilot to remain vigilant wherever they may be flying and be ready for anything at any time"
|
Giribaldi
PH0ENIX COMPANY
Phoenix Company Alliance
31
|
Posted - 2015.01.06 03:58:53 -
[142] - Quote
I still can't click fit on my t3 cruisers without the fitting going completely wonkey |
Alundil
Isogen 5
816
|
Posted - 2015.01.06 04:06:00 -
[143] - Quote
This is excellent news. I'm totally sold..... as long as I have the option to download updates from seedy Russian hosting services.
I'm right behind you
|
Amarisen Gream
The ArK's Hammer
ArK Alliance
60
|
Posted - 2015.01.06 04:15:12 -
[144] - Quote
It has been said but i'll say it again
-Allow us to fit any ship, even if we don't own it.
-More drone info
-Incoming damage
-Boost
-Turning on/off mods for checking cap etc.
(EFT/PYFA are good starting locations for what in-game Fitting Tool should do)
xoxo
Amarisen Gream
|
Warde Guildencrantz
TunDraGon
Cynosural Field Theory.
1186
|
Posted - 2015.01.06 04:28:11 -
[145] - Quote
Let me frigging drag and drop a module on another same-slot-type module in the fitting window and they switch places instead of telling me "there is already something in that location".
Yes. Everyone knows that. Ever heard of overheat module spacing?
TunDraGon Director ~ Low sec piracy since 2003 ~
Youtube ~ Join Us
My ship fits
|
Lugh Crow-Slave
417
|
Posted - 2015.01.06 05:45:12 -
[146] - Quote
Oscae wrote:
-Adjustable incoming damage; be able to check EHP+Tank against specific rats/ammo types
Happy new year CCP!
This so much this!!!!!!!!!!!!!!!!!!!!!!!!!! |
Vic Vorlon
Aideron Robotics
25
|
Posted - 2015.01.06 05:54:49 -
[147] - Quote
I'd like the option (with a checkbox) to have my ship renamed to match the fit I'm using. I know you're looking at this from the point of view of someone crafting a unique ship, but please keep in mind those of us who mass produce dozens of ships with the same fit and name, over and over again. We enable our corpmates' gameplay, but it's a pain for it to be such a laborious process.
I've posted this in the Little Things thread, and other places, over the past few months. |
Llurren
SniggWaffe
WAFFLES.
2
|
Posted - 2015.01.06 05:55:18 -
[148] - Quote
Great news! Adding my voice to the chorus:
1.) Drone control range, speed, orbital range, etc. based on current fitting. Ability to group drones prior to undocking.
2.) Logi stats (don't forget about the impact of drones)
3.) EWAR tolerance. Yeah, I know most ships will only last 2.8 seconds before being jammed, but it's good to know your resistance to such attacks.
4.) Show resistances/EHP based on current fittings; assume we'll actually turn them on when we undock. 
5.) Ability to group weapons systems prior to undocking
6.) Thermodynamics Optimization: Provide recommendations for grouping modules.
7.) Cap Life: Show both with and without cap boosters; ability to turn prop mods off/pulse
8.) Neuts: Amount drained/nos on both your ship and enemy ship
9.) Alerts: Booster installed but missing boosters; missing scripts, no drones in drone bay, etc.
10.) Explorers: Show relic and data strengths, virus coherence, etc.
-Llurren
"I grok people. I am peopleGǪ so now I can say it in people talk. I've found out why people laugh. They laugh because it hurts so muchGǪ because it's the only thing that'll make it stop hurting."
|
Pike Chargrim
Carebear Empire
5
|
Posted - 2015.01.06 06:17:21 -
[149] - Quote
I think a good starting point would be see why people use EFT. Here is what I use it for:
1) Fitting ships that a) I do not own, b) with mods that I do not have, and c) skills I have not trained up
2) Allows me to see ship stats (dmg/tank/speed/everything) with various mods on/off/overheated/etc in a simple way that can be compared across the board
3) Takes into account various Implants/drugs/links/etc
4) Takes remote effect modules into account
5) Fits are available for me as a player, across all my chars/accounts
6) Extremely responsive/fast (have you TRIED the new industry UI? soooooooooooo laggy)
7) Retrieves prices from eve-central
Now, in terms of how I would integrate this into the game:
1) Improve the ship stats window to let us see the current ship stats with various mods on/off/overheated/etc. Right now I have to undock to see how much EHP a DC2 adds!
2) Free-form fitting -> eg go to market, right click on a ship, add fitting. drag and drop mods from market or hangar, etc.
3) The UI has to be FAST!!!!!!!!!!!!!!! Server round trips are too SLOW and noticeable and this should be done 100% client-side. If you've ever tried clicking through the market window in jita or messing with the industry UI anywhere, you know what I mean. EFT has no fancy effects and it works GREAT.
4) Better fitting management - edit fits in place, share fits with people/corp/alliance
5) 1-click BUY FIT and ASSEMBLE FIT
6) Then deal with getting links/implants/etc working. Tackle the 80% use case first before going after the 20% |
Doober Escobar
Dreddit
Test Alliance Please Ignore
0
|
Posted - 2015.01.06 06:26:55 -
[150] - Quote
Let us create a prototype fit, then give us the option to purchase all the modules (with options to only by in station, system, or region) with a single click. |
| |
|
| Pages: 1 2 3 4 [5] 6 7 8 9 10 11 .. 11 :: one page |
| First page | Previous page | Next page | Last page |