Pages: 1 2 3 4 5 6 7 [8] 9 :: one page |
|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Heccie Thump
|
Posted - 2008.04.02 12:33:00 -
[211]
I have had a look through this, and other, Drake threads in preparation for getting the skills up to use them. One thing that surprises me in all of them is that I see no mention in any of those threads about fitting a Target Painter into one of the mid slots. I would have thought that a TP would be one of the primary modules to fit onto a missile boat. Is the fitting so tight on a Drake that it just can't handle it?
A lot of fittings I have seen have 2/3 LSEs and 3 Rat Specific Hardeners, but since most rats only tend to do two types of damage surely it is possible to drop one hardener and fit a TP?
|
Caj1n
|
Posted - 2008.04.20 10:52:00 -
[212]
Edited by: Caj1n on 20/04/2008 10:53:26 Drogo Targaryen: "I spent a little bit on my drake but I afk lvl 4 missions at work with it so I need to know I can leave a full stage aggro for an hour at a time and still come back to find my ship intact.
7x Heavy Launcher II
3x Large Shield Extender II 2x Pith X-type specific active hardeners 1x Pithum A-type passive hardener
4x Shield Power Relay II
3x Core defence purger II
This setup can tank 2405dps which allows me to afk any lvl 4 without fear of loosing an expensive ship."
Yep maybe can you come and show me how you stay afk in enemies abound will be nice to see :D
|
Kenji Kikuta
|
Posted - 2008.04.20 12:26:00 -
[213]
Originally by: Alaeth Question for all the experts! I have been doing some reading latelty and for the next few months I only plan on PvP I want to run lvl 4 missions with a passive tanking drake.
I have all the required Engieering, Missle etc skills, but im not sure what the best way to fit the drake would be. I have read a few set ups, but im not sure how much has changed in the mechanics of the game, so I was hoping for some advice! Thank You!
-Buzzy
HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: Whatever fits
MED SLOT: Large Shield Extender II MED SLOT: Large Shield Extender II MED SLOT: Shield Recharger II MED SLOT: Shield Hardener II MED SLOT: Shield Hardener II MED SLOT: Shield Hardener II
LOW SLOT: Ballistic Control System II LOW SLOT: Ballistic Control System II LOW SLOT: Ballistic Control System II LOW SLOT: Shield Power Relay II
RIG SLOT: Core Defence Field Purger I RIG SLOT: Core Defence Field Purger I RIG SLOT: Core Defence Field Purger I
DRONES: 5x Light Drones II
This setup has ~100 shield/s peak recharge rate. With my skills and hardwirings the total DPS is a bit over 400 with kinetic missiles (Serpentis/Guristas) and slightly lower when using EM (for Blood/Sansha).
Shield hardeners: 2x Kinetic and 1x Thermal when fighting Guristas and Serpentis. 2x EM and 1x Thermal when fighting Sansha and Blood.
I decline missions involving drones or other factions than the above mentioned in order to omptimize my level 4 mission completion time.
|
Ciryadin
FOUNDATI0N
|
Posted - 2008.04.21 12:21:00 -
[214]
High: 7x HML II 1x Drone Link Augmentor I
Mid: 3x LSE II 3x DG Invul Field
Low: 4x SPR II
Rigs: 3x Core Defense I Resists: 75/80/85/87, 26.5k shield - 160k eff Shield, 200 peak regen
3x Core Defense II Resists: 75/80/85/87, 30k shield - 180k eff shield, 227 peak regen
or
3x Core Purger I Resists: 75/80/85/87, 17.5k shield - 109k eff shield, 256 peak regen
3x Core Purger II Resists: 75/80/85/87, 17.5k shield - 109k eff shield, 311 peak regen
|
skuko
Caldari
|
Posted - 2008.04.21 12:56:00 -
[215]
Edited by: skuko on 21/04/2008 12:56:43 my L4 T2 setup:
[Drake, Tech2] Ballistic Control System II Ballistic Control System II Ballistic Control System II Shield Power Relay II
Large Shield Extender II Large Shield Extender II Invulnerability Field II Caldari Navy Heat Dissipation Field Caldari Navy Ballistic Deflection Field 10MN Afterburner II
Heavy Missile Launcher II, Scourge Heavy Missile Heavy Missile Launcher II, Scourge Heavy Missile Heavy Missile Launcher II, Scourge Heavy Missile Heavy Missile Launcher II, Scourge Heavy Missile Heavy Missile Launcher II, Scourge Heavy Missile Heavy Missile Launcher II, Scourge Heavy Missile Heavy Missile Launcher II, Scourge Heavy Missile [empty high slot]
Core Defence Field Purger I Core Defence Field Purger I Core Defence Field Purger I
i have soloed every single L4 mission so far, with the exception of "Vengeace". can't solo the last boss. working on dmg skills maximization and drones atm...i'm sure i can take him sooner or later.
not an AFK tank tho, but finishes the missions A LOT faster...
my 2 ISK
edit: faction mods because of fitting, hardeners are mission specific, runs cap stable 23/7
|
Lucius Xau
|
Posted - 2008.05.13 20:28:00 -
[216]
Edited by: Lucius Xau on 13/05/2008 20:32:22 Alot of people posting here are listing Medium slot setups with 2 hardeners, 3 large extenders, and 1 shield recharger, or 3 hardeners, 2 large extenders, and 1 shield recharger.
From what I'm working out and from what EFT says, it appears you gain more sustained shield regen by ignoring the shield recharger and just putting in an extra shield extender, having 2 or 3 hardeners and extenders in all other slots. I modelled the different builds with maxed shield skills in engineering, maybe I missed some that affect recharge/shield capacity?
Is this incorrect or is there another reason for the one shield recharger people are adding in?
|
Kenji Kikuta
|
Posted - 2008.05.14 17:03:00 -
[217]
Originally by: Lucius Xau Edited by: Lucius Xau on 13/05/2008 20:32:22 Alot of people posting here are listing Medium slot setups with 2 hardeners, 3 large extenders, and 1 shield recharger, or 3 hardeners, 2 large extenders, and 1 shield recharger.
From what I'm working out and from what EFT says, it appears you gain more sustained shield regen by ignoring the shield recharger and just putting in an extra shield extender, having 2 or 3 hardeners and extenders in all other slots. I modelled the different builds with maxed shield skills in engineering, maybe I missed some that affect recharge/shield capacity?
Is this incorrect or is there another reason for the one shield recharger people are adding in?
It's all about fittings. 7 heavy launchers and 3 large shield extenders require alot of grid, which means advanced weapon upgrades and shield upgrades to level 4/5.
Not everyone has all skills to level 5 you know
|
Nocturnal Hunter
|
Posted - 2008.05.14 18:09:00 -
[218]
here's my pve setup, i use resistance amps instead of hardeners 'cause i usally forget to turn them on, and don't get why m taking so much damage, lol
4xshield power relay II 2xlarge shield extender II 1xshield recharger II 3x resistance amps (em, kin, therm) 7xheavy limos launchers
3x core purger rigs
and 3 hornets I for the frigs
|
rekniT
Ore Hackers Inc.
|
Posted - 2008.05.21 20:59:00 -
[219]
Originally by: Shadarle I've done quite a bit of work on the passive drake tank setups and have come to some rather odd conclusions.
1. It has a stronger passive tank than the Raven has active tank (unless the Raven uses expensive faction mods). Using T1/T2/Named items results in a far stronger tank for the Drake.
2. It passive tanks better than it active tanks.
3. It makes good use of Shield Recharger II's (first time I've ever found them to be worth using).
Here is the best all-around setup that you can fit within CPU/Grid limitations (at least this is the best I personally could fit). This assumes BC lvl4.
Hi: 7 Heavy Launchers, 1 Tractor. Med: 3 Large Extender II, 1 Shield Recharger II, 2 Inv IILow: 2 SPR, 2 PDS
This gives you a peak regen tank of 495.99 dps averaged across the 4 dmg types. Drilling down you get:
EM=58.60% or 309.19 max EM tank Expl=83.44% or 772.96 max Expl tank Kin=75.16% or 515.31 max Kin tank Therm=66.88% or 386.48 max Therm tank
You have 18095.46 shields and regen them in 353.43 seconds. You will actually have a little spare cap... tho not enough to use 3 SPR instead of 3 PDS.
This is the strongest T1 tank I've ever seen while using the spreadsheet I've made up to analyze tanks. It is overpowered to have such a massive tank on a t1 ship imo, but I am not complaining as I have every skill to use it. I can run with 1 setup (not bother switching anything between missions) and tank every level 3 mission. I do not have the 2 rigs to boost my shields/regen, but that would bring this tank up to T2 command ship levels... or close to it.
If you think you have a better overall setup, please let me know what it is... but I don't think there is anything better if you're tanking all 4 damage types.
If you want stronger EM and Thermal resists and weaker Exp/Kin you could go with this setup:
1 Active EM, 1 Active Therm, 1 Passive Kinetic, 3 Extenders II's 4 SPR
You'll get 358.6, 403.42, 489.0, 448.25 EM-->Therm resists in the order from above and 424.82 average. Or if you want more EM/Therm still you go with:
1 Active EM, 1 Active Therm, 3 Extender II's, 1 Shield Recharger II 4 SPR
You get 421.88, 474.61, 316.41, 527.35 EM-->Therm resists. 435.06 average.
|
ALoneHobo
Caldari Isonami Syndicate
|
Posted - 2008.06.27 19:55:00 -
[220]
well this is my setup that i use and it rapes every mission whether it be level 3 or 4 :P
Linkage
ALoneHobo |
|
yani dumyat
|
Posted - 2008.06.27 23:35:00 -
[221]
hi all,
Want to try my hand at solo pvp and have put togeather the following drake setup:
7x heavy assault launcher II (navy ammo) 1x medium unstable power fluctuator
1x Y-T8 micro warp drive 1x J5 prototype scram 1x X5 prototype web 1x conjunctive ECCM 1x invulnrability field II 1x large shield extender II
3x PDU II 1x BCS II
3x core d field purger I
5x small minmatar drone II
Implants: squire pg4 (+3% PG) gnome kva 1000 (+3% shield HP) gnome kya 1000 (-3% shield recharge) deadeye zmm 100 (-3% missile rof)
The concept was to put togeather a ship with a replacement cost of less than 50 mill that could go head to head with a hac or take on a gang of smaller ships (i build my own ships and rigs to make this possible).
Biggest problem so far is not having a sensor damper to force frigs with 20k scrams into web range, do people think i should swap the invulrability field for one? My other question to you good folks is if you were in a hac would you fight me in this boat?
Any suggestions on setup or tips for solo pvp in general appreciated.
|
MoonI1ght
|
Posted - 2008.06.28 08:26:00 -
[222]
Edited by: MoonI1ght on 28/06/2008 08:26:13
Originally by: Shadarle
Hi: 7 Heavy Launchers, 1 Tractor. Med: 3 Large Extender II, 1 Shield Recharger II, 2 Inv II Low: 2 SPR, 2 PDS
This gives you a peak regen tank of 495.99 dps averaged across the 4 dmg types. Drilling down you get:
EM=58.60% or 309.19 max EM tank Expl=83.44% or 772.96 max Expl tank Kin=75.16% or 515.31 max Kin tank Therm=66.88% or 386.48 max Therm tank
You have 18095.46 shields and regen them in 353.43 seconds. You will actually have a little spare cap... tho not enough to use 3 SPR instead of 3 PDS.
Um am I missing something ?
http://img237.imageshack.us/img237/4295/ummks3.png
|
Ang Scott
|
Posted - 2008.06.28 10:32:00 -
[223]
Originally by: Nocturnal Hunter here's my pve setup, i use resistance amps instead of hardeners 'cause i usally forget to turn them on, and don't get why m taking so much damage, lol
4xshield power relay II 2xlarge shield extender II 1xshield recharger II 3x resistance amps (em, kin, therm) 7xheavy limos launchers
3x core purger rigs
and 3 hornets I for the frigs
My PVE setup is similar - I also prefer passive resistance amps over active harders, because you can train the Shield Compensation skills to improve them. For example, if you fit a Kinetic Deflection Amplifier II and train Kinetic Shield Compensation to level 5, you'd get just about 47% resists (before adding in BC bonuses)...that's almost as good as a Ballistic Deflection Field I (50%), and 8% less than a BDF II. WITHOUT using any cap. AFIK, there are no skills to improve active hardners (Shield Comp. will give them 3% when turned off, but nothing when active).
I also just fit 2 or 3 amps at most, targeted to the rats I'm facing, and I like to leave one med slot free for an AB II...I'm a big fan of speed.
The other differences are I use a BCU II in a low slot, and a WCC I for one of the rigs, to get that extra damage going on. I don't do lvl 4's in my setup (I use a Raven for that), but I've done all lvl 3's, low sec ratting and exploration sites with ease.
Cheers! |
Darkfury Nemesis
|
Posted - 2008.06.28 14:17:00 -
[224]
Originally by: MoonI1ght Edited by: MoonI1ght on 28/06/2008 14:15:40
Allright I tweaked a bit there and here and got the results >> Now question is , is it too much passive tank or should i change on SPR for BCS?
Yes. |
MoonI1ght
|
Posted - 2008.06.28 15:02:00 -
[225]
Umm I am seriously bored :P have playing with ETF whole day, now I came up with something interesting. Yeah Scourge Fury Heavy Missile cost quite nice penny :P but who have extra money can boost theyr dmg quite nicely. 10k of those missiles cost around 3,3kk :)))
New Setup with improved dmg
|
ZephyrLexx
|
Posted - 2008.07.05 22:44:00 -
[226]
Edited by: ZephyrLexx on 05/07/2008 22:45:43 High: 7 Heavy Launchers, 1 Tractor.
Med: 3 Large Extender II, 1 Shield Recharger II, 2 Inv II
Low: 2 SPR, 2 PDS
This gives you a peak regen tank of 495.99 dps averaged across the 4 dmg types. Drilling down you get:
EM=58.60% or 309.19 max EM tank Expl=83.44% or 772.96 max Expl tank Kin=75.16% or 515.31 max Kin tank Therm=66.88% or 386.48 max Therm tank
You have 18095.46 shields and regen them in 353.43 seconds. You will actually have a little spare cap... tho not enough to use 3 SPR instead of 3 PDS. I do not have the 2 rigs to boost my shields/regen, but that would bring this tank up to T2 command ship levels... or close to it.
what is SPR / PDS? is this the best 'all round' setup like the guy claims?
thanks
|
Victor Kruger
|
Posted - 2008.07.11 10:29:00 -
[227]
I'm using a similair setup as diplayed above now:
High: - 7x Heavy Missile Launcher II - 1x Tractor Beam
Mid: - 3x Large Shield Extender II - 1x Shield Recharger II - 2x Shield Hardener (Rat specific)
Low: - 2x Beta Reactor Control: Shield Power Relay I - Power Diagnostic II - Ballistic Control System II
Rig: - 3x Core Defense Field Purger
This setup eats up 1072 / 1115 Powergrid 646 / 656 CPU
18'000 Shield with a recharge rate of 234 seconds.
Keep in mind that you need decent Engineering / Electronics skills to fit all this stuff. --------------- Hey, where's my portrait |
Semprorr
|
Posted - 2008.07.16 19:57:00 -
[228]
After playing around a bit, IÆve come up with the following:- High slots 7x Limos Heavy missile bays Mid slots 2x FS9 Regolith shield induction 1x Anointed (EM ward Reinforcement) 2x Invulnerability Fields 1x V-M15 Multispectral Matrix Low Slots 3x Capacitor Flux Coil T2 1x Damage Control T2 Rigs 2x Core Defence Purger T1 1x Warhead Catalyst
11464 shield recharge rate 716.8 (looking for some advice as to how best to further reduce recharge rate). Cap 2357 with a recharge rate of 243.1. This runs at around 70% with everything running. The shield bonus is EM 75.4% - Explosive 80.1% - Kinetic 76.2% - Thermal 68.2%, or so it tells me. IÆm pretty new to eve and have just over 2.6mil skill points, any ideas that would help increase the defensive as well as the offensive capabilities of my drake would be great fully accepted...
|
FlameGlow
Caldari State Protectorate
|
Posted - 2008.07.16 21:36:00 -
[229]
Originally by: Semprorr After playing around a bit, IÆve come up with the following:- High slots 7x Limos Heavy missile bays Mid slots 2x FS9 Regolith shield induction 1x Anointed (EM ward Reinforcement) 2x Invulnerability Fields 1x V-M15 Multispectral Matrix <- too many resistance mods, drop some or use specialised instead of invulns Low Slots 3x Capacitor Flux Coil T2<- wtf is this for?ballistic controls/shield power relays only 1x Damage Control T2 Rigs 2x Core Defence Purger T1 1x Warhead Catalyst <- bad idea, use another purger
Train for t2 shield mods, they are worth it
|
vayne mudd
|
Posted - 2008.07.22 19:12:00 -
[230]
Originally by: Kenji Kikuta
Originally by: Alaeth Question for all the experts! I have been doing some reading latelty and for the next few months I only plan on PvP I want to run lvl 4 missions with a passive tanking drake.
I have all the required Engieering, Missle etc skills, but im not sure what the best way to fit the drake would be. I have read a few set ups, but im not sure how much has changed in the mechanics of the game, so I was hoping for some advice! Thank You!
-Buzzy
HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: Whatever fits
MED SLOT: Large Shield Extender II MED SLOT: Large Shield Extender II MED SLOT: Shield Recharger II MED SLOT: Shield Hardener II MED SLOT: Shield Hardener II MED SLOT: Shield Hardener II
LOW SLOT: Ballistic Control System II LOW SLOT: Ballistic Control System II LOW SLOT: Ballistic Control System II LOW SLOT: Shield Power Relay II
RIG SLOT: Core Defence Field Purger I RIG SLOT: Core Defence Field Purger I RIG SLOT: Core Defence Field Purger I
DRONES: 5x Light Drones II
This setup has ~100 shield/s peak recharge rate. With my skills and hardwirings the total DPS is a bit over 400 with kinetic missiles (Serpentis/Guristas) and slightly lower when using EM (for Blood/Sansha).
Shield hardeners: 2x Kinetic and 1x Thermal when fighting Guristas and Serpentis. 2x EM and 1x Thermal when fighting Sansha and Blood.
I decline missions involving drones or other factions than the above mentioned in order to omptimize my level 4 mission completion time.
Some reason I'm having a CPU issue with that setup, any skills I can think of that reduce CPU are already level 5. Am I forgetting something?
|
|
Atlas Oracle
Minmatar Native Freshfood
|
Posted - 2008.07.22 19:40:00 -
[231]
this is a really great thread. should practically be stickied.
|
vayne mudd
|
Posted - 2008.07.25 16:27:00 -
[232]
Originally by: vayne mudd
Originally by: Kenji Kikuta
Originally by: Alaeth Question for all the experts! I have been doing some reading latelty and for the next few months I only plan on PvP I want to run lvl 4 missions with a passive tanking drake.
I have all the required Engieering, Missle etc skills, but im not sure what the best way to fit the drake would be. I have read a few set ups, but im not sure how much has changed in the mechanics of the game, so I was hoping for some advice! Thank You!
-Buzzy
HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: HML II HIGH SLOT: Whatever fits
MED SLOT: Large Shield Extender II MED SLOT: Large Shield Extender II MED SLOT: Shield Recharger II MED SLOT: Shield Hardener II MED SLOT: Shield Hardener II MED SLOT: Shield Hardener II
LOW SLOT: Ballistic Control System II LOW SLOT: Ballistic Control System II LOW SLOT: Ballistic Control System II LOW SLOT: Shield Power Relay II
RIG SLOT: Core Defence Field Purger I RIG SLOT: Core Defence Field Purger I RIG SLOT: Core Defence Field Purger I
DRONES: 5x Light Drones II
This setup has ~100 shield/s peak recharge rate. With my skills and hardwirings the total DPS is a bit over 400 with kinetic missiles (Serpentis/Guristas) and slightly lower when using EM (for Blood/Sansha).
Shield hardeners: 2x Kinetic and 1x Thermal when fighting Guristas and Serpentis. 2x EM and 1x Thermal when fighting Sansha and Blood.
I decline missions involving drones or other factions than the above mentioned in order to omptimize my level 4 mission completion time.
Some reason I'm having a CPU issue with that setup, any skills I can think of that reduce CPU are already level 5. Am I forgetting something?
If anyone wants to know, the only way I got that to fit was with a 5% CPU implant, which are quite expensive. However, I did get the same setup to fit with a 3% implant, by using a Beta Reactor Control SPR instead of a T2 SPR.
|
Thorek Ironbrow
Caldari Ironbrow Industries Co.
|
Posted - 2008.07.25 19:09:00 -
[233]
My set-up for Drake is pretty much what you have.
High: 7x Heavy Missile Launcher II Medium: 2x Invulnerability Field II, 2x Shield Recharger II, 2x Large Shield Extender II Low: 4x Shield Power Relay II Rigs: 3x Core Defence Field Purger I
According to EFT, if the CDFPs were tech 2, and I had all tanking skills at V, then it would tank 1155 DPS with an EHP of 48853. But anyway, back to the point... I'm awesome :D |
vayne mudd
|
Posted - 2008.07.26 00:36:00 -
[234]
Originally by: Thorek Ironbrow My set-up for Drake is pretty much what you have.
High: 7x Heavy Missile Launcher II Medium: 2x Invulnerability Field II, 2x Shield Recharger II, 2x Large Shield Extender II Low: 4x Shield Power Relay II Rigs: 3x Core Defence Field Purger I
According to EFT, if the CDFPs were tech 2, and I had all tanking skills at V, then it would tank 1155 DPS with an EHP of 48853.
You need some BCS II's in there. Tanking doesn't mean much if you take a ton of time to kill larger ships.
|
Thorek Ironbrow
Caldari Ironbrow Industries Co.
|
Posted - 2008.07.26 10:58:00 -
[235]
Originally by: vayne mudd
Originally by: Thorek Ironbrow My set-up for Drake is pretty much what you have.
High: 7x Heavy Missile Launcher II Medium: 2x Invulnerability Field II, 2x Shield Recharger II, 2x Large Shield Extender II Low: 4x Shield Power Relay II Rigs: 3x Core Defence Field Purger I
According to EFT, if the CDFPs were tech 2, and I had all tanking skills at V, then it would tank 1155 DPS with an EHP of 48853.
You need some BCS II's in there. Tanking doesn't mean much if you take a ton of time to kill larger ships.
Yes I have on my current set-up. Now I just need faction or complex modules in the mediums. But anyway, back to the point... I'm awesome :D |
Prometius
Caldari Dark Nebula Gallente Division Dark Nebula Galactic Empire
|
Posted - 2008.08.05 20:36:00 -
[236]
My setup is as follows:
[Drake, Current Drake Setup] Shield Power Relay II Shield Power Relay II Ballistic Control System II Ballistic Control System II
Large Shield Extender II Large Shield Extender II Large Shield Extender II Photon Scattering Field II Invulnerability Field II Heat Dissipation Field II
Advanced 'Limos' Heavy Missile Bay I, Thunderbolt Heavy Missile Advanced 'Limos' Heavy Missile Bay I, Thunderbolt Heavy Missile Advanced 'Limos' Heavy Missile Bay I, Thunderbolt Heavy Missile Advanced 'Limos' Heavy Missile Bay I, Thunderbolt Heavy Missile Advanced 'Limos' Heavy Missile Bay I, Thunderbolt Heavy Missile Advanced 'Limos' Heavy Missile Bay I, Thunderbolt Heavy Missile Advanced 'Limos' Heavy Missile Bay I, Thunderbolt Heavy Missile Drone Link Augmentor I
Core Defence Field Purger I Core Defence Field Purger I Core Defence Field Purger I
Acolyte II x5
My effective HP is 70k and my DPS is 296.3 where i can handle 471 dps.
This setup is for ratting in 0.0 or lvl 4 missions. I have not found a spawn i couldn't handle. You will need high skills to make this setup work however. The drone link aug is more of a personal choice due to a second account that salvages and recovers loot for me while i rat.
Feedback welcome
|
Rockmen
|
Posted - 2008.08.12 18:46:00 -
[237]
Edited by: Rockmen on 12/08/2008 18:53:16
Originally by: Shadarle Here is the best all-around setup that you can fit within CPU/Grid limitations (at least this is the best I personally could fit). This assumes BC lvl4.
Hi: 7 Heavy Launchers, 1 Tractor. Med: 3 Large Extender II, 1 Shield Recharger II, 2 Inv II Low: 2 SPR, 3 PDS
This gives you a peak regen tank of 495.99 dps averaged across the 4 dmg types. Drilling down you get:
EM=58.60% or 309.19 max EM tank Expl=83.44% or 772.96 max Expl tank Kin=75.16% or 515.31 max Kin tank Therm=66.88% or 386.48 max Therm tank
You have 18095.46 shields and regen them in 353.43 seconds. You will actually have a little spare cap... tho not enough to use 3 SPR instead of 3 PDS.
3 SPR will fit with the right skills with cap and cpu to spare. other than this one error this is a great post and setup
|
Llawa
|
Posted - 2008.08.13 13:12:00 -
[238]
Excellent, a Drake thread that won't get locked within 5 minutes!
Ballistic Control System II Ballistic Control System II Power Diagnostic System II Shield Power Relay II
Heat Dissipation Amplifier II Invulnerability Field II Magnetic Scattering Amplifier II Explosion Dampening Amplifier II Large Shield Extender II Large Shield Extender II
Heavy Missile Launcher II Heavy Missile Launcher II Heavy Missile Launcher II Heavy Missile Launcher II Heavy Missile Launcher II Heavy Missile Launcher II Heavy Missile Launcher II [empty high slot]
Core Defence Field Extender I Anti-Kinetic Screen Reinforcer I Anti-Thermal Screen Reinforcer I
That gives me resists of EM: 67.5 Therm: 78.4 Kin: 75.2 Exp: 83.7
Effective HP is 76,118
DPS is 310 (according to EFT)
|
Axexut
Caldari PROGENITOR CORPORATION Intrepid Crossing
|
Posted - 2008.08.13 13:25:00 -
[239]
Edited by: Axexut on 13/08/2008 13:27:05
Originally by: Llawa Excellent, a Drake thread that won't get locked within 5 minutes!
Ballistic Control System II Ballistic Control System II Power Diagnostic System II Shield Power Relay II
Heat Dissipation Amplifier II Invulnerability Field II Magnetic Scattering Amplifier II Explosion Dampening Amplifier II Large Shield Extender II Large Shield Extender II
Heavy Missile Launcher II Heavy Missile Launcher II Heavy Missile Launcher II Heavy Missile Launcher II Heavy Missile Launcher II Heavy Missile Launcher II Heavy Missile Launcher II [empty high slot]
Core Defence Field Extender I Anti-Kinetic Screen Reinforcer I Anti-Thermal Screen Reinforcer I
That gives me resists of EM: 67.5 Therm: 78.4 Kin: 75.2 Exp: 83.7
Effective HP is 76,118
DPS is 310 (according to EFT)
This.
As several have already posted in this thread: Some of these suggested builds are WAY to heaviily tanked for Level III / IV missions. While they will never break, their outbound DPS is so slow that Level IVs will take forever.
Also, Liawa's build (with a little tweaking) isn't half bad if your Corp gets WarDec'd.
Nice build and one everyone using Drakes for missions should consider.
|
Llawa
|
Posted - 2008.08.13 13:33:00 -
[240]
You made me blush!
|
|
|
|
|
Pages: 1 2 3 4 5 6 7 [8] 9 :: one page |
First page | Previous page | Next page | Last page |