EVE Search - [REV] Drake (Passive)

Check My IP Information

All Channels

Ships and Modules

[REV] Drake (Passive)

» Click here to find additional results for this topic using Google

Monitor this thread via RSS [?]

Pages: 1 2 3 4 5 6 7 8 [9] :: one page

Author	Thread Statistics \| Show CCP posts - 0 post(s)
KustoMKilleR Caldari Nexus Consortium	Posted - 2008.09.09 14:38:00 - [241] heres the setup i use. does lvl 3's way too easily and can only get better with full T2 fit. Drake Passive
Zar Terra MacroIntel United Corporations Against Macros	Posted - 2008.10.09 15:33:00 - [242] Hi all. Some really cool setups here. I was wondering if anyone had, or knew of any really good PVP setups for the Drake ? Thanks in adv. -= NightShifter =-
Gypsio III Dirty Filthy Perverts	Posted - 2008.10.09 16:35:00 - [243] Edited by: Gypsio III on 09/10/2008 16:41:41 Actually, most of the set-ups in this thread are terrible. They tend to be stupidly overtanked useless-brick fits. Anything with a shield recharger, or more than two SPRs, for example. For a useful PVP fit, either go for HAM gank: 7x HAM II MWD, X5 web, J5 scram, LSE II, 2x Inv II DC II, PDS II, 2x BCS II Shield hardener or extender rigs or for stand-off DPS and ewar support: 7x HML II MWD, sensor booster, 4x ECM, RSD or TD DC II, 3x BCS II Shield hardener rigs. A missile velocity rig would be useful though.
Daergaar	Posted - 2008.10.09 16:41:00 - [244] Originally by: Zar Terra Hi all. Some really cool setups here. I was wondering if anyone had, or knew of any really good PVP setups for the Drake ? Thanks in adv. I'd like to know too. I don't intend to kill anybody in it. I just want to be able to travel through a 0.4 gate without dying 100% of the time on my way to a new agent. A PvE fit is clearly not working for me.
Zar Terra MacroIntel United Corporations Against Macros	Posted - 2008.10.10 06:30:00 - [245] Originally by: Gypsio III Edited by: Gypsio III on 09/10/2008 16:41:41 -snip- For a useful PVP fit, either go for HAM gank: 7x HAM II MWD, X5 web, J5 scram, LSE II, 2x Inv II DC II, PDS II, 2x BCS II Shield hardener or extender rigs or for stand-off DPS and ewar support: 7x HML II MWD, sensor booster, 4x ECM, RSD or TD DC II, 3x BCS II Shield hardener rigs. A missile velocity rig would be useful though. Thanks heaps for that, I'll definitely give these a go. Appreciated. -= NightShifter =-
Reyna Neens	Posted - 2008.10.16 19:53:00 - [246] Once I got to level 4 missions in my drake and started facing battleships, I realized that it's not enough just to be able to tank enemies. If you're soloing missions, you also need to be able to dish out as much damage as possible. Therefore, the right setup needs a compromise between the best DPS and best tank possible. In the high slots, you need 7 Heavy Missle Launcher IIs or better when facing level 4s. For lesser levels or skills, you might want to use a standard or 2 to help deal with frigates if your drone skills aren't so good. If you have room, use whatever else such as tractor beam, salvager, or anything else that fits. With all those missle launchers, the one module type that will greatly increase your damage are ballistic control units. However, they compete with another module in the low slot that is really good for defense - shield power relays. A fair compromise between offense and defense is running 2 and 2. Midslots are where your shield tanking makes a living. One of the best ways to deal with damage is to prevent them from hitting you in the first place. This is where shield resistance comes into effect. In general, Shield Hardener 2 > Shield Hardener 1 > Shield Amplifer 2. Don't forget that capacitor recharge is not linear, so you can keep all your modules on and still never run out of cap at a lower level (such as in the 60%). Assuming max skills (using Eve Fitting Tool), you can get the following shield resistances. 3 Tech 2 Hardeners - EM 87.9% - TH 90.3% - KN 92.7% - EX 94% 2 Tech 2 Hardeners - EM 82.4% - TH 85.9% - KN 89.4% - EX 91.2% 1 Tech 2 Hardener - EM 66.3% - TH 73% - KN 79.8% - EX 83.1% Always fit your hardeners based on the damage the enemy will do in your mission. You will want at least 2 hardeners of the primary type and 1 hardener of the secondary type, but adjust according to your mission. Shield Extenders increase your max shield capacity which also increase your regen. Shield Rechargers are not worth it, you will get more recharge from adding another extender. In summary, here is how a mission-running drake without any expensive mods should probably be fitted. Feel free to use tech I equivalents until you have the skills. High 7 Heavy Missle Launcher II Mid 3 Shield Hardeners (rat specific, usually 2 primary, 1 secondary) 3 Large Shield Extender II Low 2 Ballistic Control Units II 2 Shield Power Relay II Rigs 3 Core Defense Field Purger I If you have trouble fitting everything, you may need to downgrade a module or two to a tech 1 version so get enough CPU (or maybe a large shield extender to medium or another hardener). Another option is to upgrade to a faction module, but that's an expensive way to go in a ship that's likely to get replaced by a raven anyways.
Rufus MacMaranth Gallente Shadow Front	Posted - 2009.01.13 18:41:00 - [247] Originally by: Reyna Neens Edited by: Reyna Neens on 23/10/2008 14:10:02 Mid 3-4 Shield Hardeners (rat specific, usually 2 primary, 1 secondary) 2-3 Large Shield Extender II Actually either 3 LSE IIs or 4 hardener IIs give me CPU issues. 4 hardeners also give cap issues with the 2 x SPR IIs. I (heretically) just take the lazy way out for most missions (ex blood/sansha) and use 2 invul IIs, 2 LSE IIs, and 2 Shield Recharger IIs. If blood/sansha just swap the invul and one SR for an EM II and a heat II hardener. Cheers, Ruf.
Karrade Krise Galatic P0RN Starz	Posted - 2009.01.13 18:54:00 - [248] Originally by: Rufus MacMaranth Originally by: Reyna Neens Edited by: Reyna Neens on 23/10/2008 14:10:02 Mid 3-4 Shield Hardeners (rat specific, usually 2 primary, 1 secondary) 2-3 Large Shield Extender II Actually either 3 LSE IIs or 4 hardener IIs give me CPU issues. 4 hardeners also give cap issues with the 2 x SPR IIs. I (heretically) just take the lazy way out for most missions (ex blood/sansha) and use 2 invul IIs, 2 LSE IIs, and 2 Shield Recharger IIs. If blood/sansha just swap the invul and one SR for an EM II and a heat II hardener. ARGH!!! Nice necro...did you notice that this was BEFORE QR? Karrade-Confirming all pirate babies come from me Surfin's PlunderBunny-I always knew you were a woman Karrade-I am a man of many talents.
Rufus MacMaranth Gallente Shadow Front	Posted - 2009.01.13 22:35:00 - [249] Originally by: Karrade Krise Originally by: Rufus MacMaranth Originally by: Reyna Neens Edited by: Reyna Neens on 23/10/2008 14:10:02 Mid 3-4 Shield Hardeners (rat specific, usually 2 primary, 1 secondary) 2-3 Large Shield Extender II Actually either 3 LSE IIs or 4 hardener IIs give me CPU issues. 4 hardeners also give cap issues with the 2 x SPR IIs. I (heretically) just take the lazy way out for most missions (ex blood/sansha) and use 2 invul IIs, 2 LSE IIs, and 2 Shield Recharger IIs. If blood/sansha just swap the invul and one SR for an EM II and a heat II hardener. ARGH!!! Nice necro...did you notice that this was BEFORE QR? Yes :) But as it was the only passive drake setup listed in the ships and modules index ....
Lara Petrofa	Posted - 2009.03.29 12:07:00 - [250] Allright guys, nothing new but best passive i could come up with, if you wanna tank through the tougher lvl 4 missions: High:7 Heavy Launchers, small noss or salvager or whatever, Med: 3 invus or spec hardeners, 3 LSE Low: 1 PDU, 3 Shield Power Relays Rigs: 3 Field Purger everything best tec available good drones for better dps if you feel overtanked drop Shield Power Relay for Ballistic Controls till it suits your mission The whole thing s really sturdy DPS suck though

sheshen	Posted - 2009.03.29 14:13:00 - [251] necro thread troll much?
Canaloney Soup Caldari State War Academy	Posted - 2009.03.29 18:47:00 - [252] Wohooo necroing in a necro thread \o/ Max tank 7 HM II Inv field II, EM amp II, thermal amp II & 3 LSE II 4 SPR II 3 CDFP 840 tank & 271 dps without drones Tank/DPS 7 HM II 2 Inv field II, 2 LSE II & 2 SR II 2 BCS II & 2 SPR II 3 CDFP 531 tank & 396 dps without drones Fit resist for rats Nerco done \o/
Clearshot6245	Posted - 2009.04.30 18:19:00 - [253] high slots: 6/7 heavy launchers (havent checked if u can hit 7 with the other fittings) med slots: 3 large shield extenders 2 shield rechargers 1 invulnerbility field low slots: 4 shield power relays rigs: core defecne field purgers this is the fiting im aiming towards, not saying its best but ive seen it work well
Lindsay Logan	Posted - 2009.04.30 18:20:00 - [254] Did we relly need to dig up this 2-3 year old Drake thread when there are so many new ones? :P
Grek Forto Malevolent Intentions	Posted - 2009.04.30 21:26:00 - [255] ROfl, Revelations thread. Bumpage ftw Originally by: Stitcher It's "Caldari", not "Caldarians". One Caldari, three Caldari, all the Caldari are doing Caldari things using Caldari tools in a Caldari way.


Pages: 1 2 3 4 5 6 7 8 [9] :: one page
First page \| Previous page \| Next page \| Last page

COPYRIGHT NOTICE
EVE Online, the EVE logo, EVE and all associated logos and designs are the intellectual property of CCP hf. All artwork, screenshots, characters, vehicles, storylines, world facts or other recognizable features of the intellectual property relating to these trademarks are likewise the intellectual property of CCP hf. EVE Online and the EVE logo are the registered trademarks of CCP hf. All rights are reserved worldwide. All other trademarks are the property of their respective owners. CCP hf. has granted permission to EVE-Search.com to use EVE Online and all associated logos and designs for promotional and information purposes on its website but does not endorse, and is not in any way affiliated with, EVE-Search.com. CCP is in no way responsible for the content on or functioning of this website, nor can it be liable for any damage arising from the use of this website.