i completely agree >.< so far not liking this new probe scanning ...

http://puu.sh/laoXr/f7a66ef27e.jpg like this issue is driving me insane >.< why the f do i want to select specific probe... tell me that ccp.... what i however DO want is to move the whole group >.> -.- Q.Q

Hi Devs,

So the saga of the fitting screen continues.

imgur album linky

Picture 1 - Me parking my Onyx to board a Helios, and getting a warning that I don't have enough grid to activate a large shield extender.
The game log:
[ 2015.11.05 14:40:51 ] (info) To bring Large Shield Extender II online requires 160.00 power units, but only 151.91 of the 1071.91 units that your power core produces are still available.
This is odd, because I've just swapped my Onyx for a Helios - so I'm wondering, "Why am I getting powergrid notifications for a ship I just left? Maybe I'll reboard it and check."

Picture 2 - Me reboarding my Onyx, and getting a warning that I now don't have enough grid to run the Medium Neut.
Game log:
[ 2015.11.05 14:42:32 ] (info) To bring Medium Diminishing Power System Drain I online requires 175.00 power units, but only 166.91 of the 1071.91 units that your power core produces are still available.
This is odd, because a minute earlier I was told the LSE wasn't powered, but it looks like it might be after all. I better check the fitting screen.

Picture 3 - My fitting screen, which firstly revealed the Neut was offline, the LSE was online, but the Neut could be onlined. Then I noticed the wiredness.
On the fitting screen, my missile launchers appear to be unloaded. But on my display, they are fully loaded.

Picture 4 - This is me after relogging, and reopening the fitting window. It now appears that all my modules have disappeared from the fitting window, but as you can see, they are still active on the HUD.

Picture 5 - I closed the fitting window, and tried to mouse over the module activation button. There "should" be a tool tip in this screen shot. There is no tool tip.

Picture 6 - This is after I warped off to a safe, jet canned some ammo, and managed to activate the launcher and destroy the can. This picture is me right clicking the Missile launcher to reload ammo. No reload dialogue box has appeared.

After all this, and deciding to try some common bug fixes, I left the game with all clients and cleared my game cache from the Launcher. (Note, this was all after today's patch and emergency reboot.)

My launcher will now not let me enter a username; it has a the wee blue spinning status icon; and the client status bar is all grey. I am able to log into the game using the bin folder exefile.exe.

So, I think there are three issues here:
1) There's a problem associated with fitting when you board ships at a Ship Maintenance Array.
2) There's a serious bug affecting the fitting window, module tool tips, and the module right click interface.
3) At the present, clearing cache may well crash the launcher.

I'm off to run eve repair - will update when I have.

I have. There was a small fix patch down loaded, but this has had no effect on the launcher problem. It still does nothing, and eventually my OS gives a process time out warning.

...
Boarding my everyday scanning legion...

[ 2015.11.05 17:07:13 ] (info) To bring 1600mm Steel Plates II online requires 550.00 power units, but only 0.00 of the 0.00 units that your power core produces are still available.
[ 2015.11.05 17:07:21 ] (info) To bring Warp Scrambler II online requires 1.00 power units, but only 0.00 of the 0.00 units that your power core produces are still available.
[ 2015.11.05 17:07:24 ] (info) To bring Scan Rangefinding Array II online requires 1.00 power units, but only 0.00 of the 0.00 units that your power core produces are still available.
[ 2015.11.05 17:07:28 ] (info) To bring 425mm AutoCannon II online requires 138.60 power units, but only 0.00 of the 0.00 units that your power core produces are still available.
[ 2015.11.05 17:08:13 ] (question) Do you really want to quit now?

Half the modules are just missing on my fitting window.



Any ideas?

Raised this as a support ticket - ref 65920

Most ppl were able to fix fitting problems by clearing game cache or at least verifying the files

I tried this, my launcher died.

It has nothing to do with the launcher! only with serverload, your connection and the processing speed of your computer. Since it is checking over 65000 files you should consider to defragment at least the affected area if the files are NOT on an SSD or look for any other real source of your problem instead of blaming the launcher. My launcher was done checking after 3 minutes and 11 seconds (just tested it). Not always is CCP the cause of a problem :P

I confirm that since the patch I have huge lags issues, especially when using market.

if that was the case it would do it everytime i start the launcher, it doesnt, its only after 1 of their 6 week updates and will do so for 3 or 4 days and then 1 of the myriad of patch fixes they deploy, actually fixes it.

I also have the black screen instead of character selection issue

I read that when the skill finished it may fix itself ... that's 11 hours away .. could be worse I suppose as next in queue is 14 days, but pretty annoying not to be able to play for that time

Time to DELETE your shared cache and reinstall everything in that case:)

Just received an answer to my ticket, confirming that its connected to the Skill Queue somehow. It should fix itself after current skill training is completed they say....

Your bug report was successfully sent and has the ID EBR-54065.

See in the patch notes that there was a memory leak issue that was fixed. Any chance this may have been causing the client lag (rewinding, modules not activating) that some of us have reported?

I just saw another report on the Superior cache, thanks for the help. These are pretty complicated sites in terms of all the moving parts, so every report helps.

Hi Devs,

So the saga of the fitting screen continues.

imgur album linky

Picture 1 - Me parking my Onyx to board a Helios, and getting a warning that I don't have enough grid to activate a large shield extender.
The game log:
[ 2015.11.05 14:40:51 ] (info) To bring Large Shield Extender II online requires 160.00 power units, but only 151.91 of the 1071.91 units that your power core produces are still available.
This is odd, because I've just swapped my Onyx for a Helios - so I'm wondering, "Why am I getting powergrid notifications for a ship I just left? Maybe I'll reboard it and check."

Picture 2 - Me reboarding my Onyx, and getting a warning that I now don't have enough grid to run the Medium Neut.
Game log:
[ 2015.11.05 14:42:32 ] (info) To bring Medium Diminishing Power System Drain I online requires 175.00 power units, but only 166.91 of the 1071.91 units that your power core produces are still available.
This is odd, because a minute earlier I was told the LSE wasn't powered, but it looks like it might be after all. I better check the fitting screen.

Picture 3 - My fitting screen, which firstly revealed the Neut was offline, the LSE was online, but the Neut could be onlined. Then I noticed the wiredness.
On the fitting screen, my missile launchers appear to be unloaded. But on my display, they are fully loaded.

Picture 4 - This is me after relogging, and reopening the fitting window. It now appears that all my modules have disappeared from the fitting window, but as you can see, they are still active on the HUD.

Picture 5 - I closed the fitting window, and tried to mouse over the module activation button. There "should" be a tool tip in this screen shot. There is no tool tip.

Picture 6 - This is after I warped off to a safe, jet canned some ammo, and managed to activate the launcher and destroy the can. This picture is me right clicking the Missile launcher to reload ammo. No reload dialogue box has appeared.

After all this, and deciding to try some common bug fixes, I left the game with all clients and cleared my game cache from the Launcher. (Note, this was all after today's patch and emergency reboot.)

My launcher will now not let me enter a username; it has a the wee blue spinning status icon; and the client status bar is all grey. I am able to log into the game using the bin folder exefile.exe.

So, I think there are three issues here:
1) There's a problem associated with fitting when you board ships at a Ship Maintenance Array.
2) There's a serious bug affecting the fitting window, module tool tips, and the module right click interface.
3) At the present, clearing cache may well crash the launcher.

I'm off to run eve repair - will update when I have.

I have. There was a small fix patch down loaded, but this has had no effect on the launcher problem. It still does nothing, and eventually my OS gives a process time out warning.

See in the patch notes that there was a memory leak issue that was fixed. Any chance this may have been causing the client lag (rewinding, modules not activating) that some of us have reported?

Oh yes, sorry my bad. In the old launcher it is the "Repair" button in the advanced options like you said. It should work the same way like the new verification. It will calculate and compare the hash sums of all important data and redownload the damaged/missing ones if any. Since you need those files anyway, you will need to download them the one way or another to play. If you do clear your cache, then all files will be redownloaded, wich would be contra productive for your case, so just try the repair option

Hey buddy, so I'm really just here dealing with issues relating to the new Probe Scanner, Solar System map and Directional Scan features that the team I'm working with deployed yesterday. For the beta map issue - can you submit a bug report? I have an open defect that I track performance issues with the beta map in. Submitting it from the client is preferable, you can get that via the F12 menu.

Ended up doing a 'chkdsk /r' on my game drive, and after that a defrag. I had made a copy of the game folder a few weeks ago and decided to copy it over it. Then, after defrag was done, decided to give the launcher one more try. It updated the launcher, downloaded the patch and this time it did it, its working good again.

Just received an answer to my ticket, confirming that its connected to the Skill Queue somehow. It should fix itself after current skill training is completed they say....

I'm have issues here. I've been find mods that have been on my ship after fitting them not showing up when i'm undocked . 2 examples so far is an improved cloaking device fitted to my command ship, and a smart bomb and armor repairer, sensor buster on my carrier.

We are totally aware of this and are looking at fixes.

If you believe you have any useful information that could help us debug and reproduce this so that we can deliver a solid fix, please report them through the client tool for bug reports including as much information as you believe you have.

The only reason I'm replying here is because I feel bad and understand it's a very serious bug. The forums are however not a good tool to report bugs or find out what bugs we are aware of. If you report thought the proper tools I believe you get to follow some basic information on what is happening to the BR, including if it is attached to an active defect.