EVE Search - pyfa 1.18.1 (YC 118.1 release)

Check My IP Information

All Channels

Ships and Modules

pyfa 1.18.1 (YC 118.1 release)

» Click here to find additional results for this topic using Google

Monitor this thread via RSS [?]

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 [14] 15 16 17 18 .. 18 :: one page

Author	Thread Statistics \| Show CCP posts - 0 post(s)
Sable Blitzmann Sebiestor Tribe Minmatar Republic 246	Posted - 2017.04.24 03:31:46 - [391] - Quote Yankee AirPirate wrote: Thanks for the link and the discussion. It's very encouraging. The key to getting to 1.08 Probe Size in PYFA on your Signature/Sensor Strength (for Caldari ships) is, using Gravemetric Sensor Compensation skill, dual Sensor Boosters running ECCM scripts in the mids and a Signal Amplifier in the lows. Also, running an AB vs a MWD (obvious) for prop mod. Shield mods and rigs increase signature, so paying attention to this is important too. Any lack of Sensor Strength can be augmented with Low-grade Talons. My interest mainly stems from wanting to run Expeditions in LoSec while minimizing ambush risk. To that end I was working with the Tengu and the Rook. These are not "cheap ships", so I am doing my homework. PYFA has been very helpful. Sable, again Thanks. Hey no problem, always good to know how game mechanics works. Good luck with your research :D
Soel Reit Dambusters 617 Sq 866	Posted - 2017.04.25 03:45:17 - [392] - Quote add fuel in "ammunition & charges" yes please <3 GÖÑ
Sable Blitzmann Sebiestor Tribe Minmatar Republic 248	Posted - 2017.04.25 04:58:57 - [393] - Quote Soel Reit wrote: add fuel in "ammunition & charges" yes please <3 GÖÑ This has been requested a few different times... I don't remember off the top of my head why it's difficult to do, but it is (or at least was when I last looked at it - a fresh glance at it might prove useful). In the meantime, you should be able to search for fuel in the market search and it will come up. That was the compromise we made last time this was brought up. :) And I can look into this again and report back :) :)
Soel Reit Dambusters 617 Sq 867	Posted - 2017.04.25 05:41:16 - [394] - Quote Sable Blitzmann wrote: Soel Reit wrote: add fuel in "ammunition & charges" yes please <3 GÖÑ This has been requested a few different times... I don't remember off the top of my head why it's difficult to do, but it is (or at least was when I last looked at it - a fresh glance at it might prove useful). In the meantime, you should be able to search for fuel in the market search and it will come up. That was the compromise we made last time this was brought up. :) And I can look into this again and report back :) :) n1 as always! great dev!
Soel Reit Dambusters 617 Sq 900	Posted - 2017.04.28 06:52:38 - [395] - Quote Quote: [Loki] Syndicate Damage Control Nanofiber Internal Structure II Nanofiber Internal Structure II Nanofiber Internal Structure II /OFFLINE Overdrive Injector System II /OFFLINE Gistum A-Type 50MN Microwarpdrive Thukker Large Shield Extender Thukker Large Shield Extender Pithum A-Type Adaptive Invulnerability Field Pithum A-Type Adaptive Invulnerability Field Entosis Link II [Empty High slot] [Empty High slot] [Empty High slot] [Empty High slot] [Empty High slot] Medium Core Defense Field Extender II Medium Core Defense Field Extender II Medium Core Defense Field Extender II Loki Defensive - Adaptive Shielding Loki Electronics - Immobility Drivers Loki Engineering - Capacitor Regeneration Matrix Loki Offensive - Turret Concurrence Registry Loki Propulsion - Chassis Optimization bugging out with max speed capped at 4k m/s???? with snakes and links and quafe speed don't increase putting online the 2 mods OFFLINE is this only my problem?
Valence Benedetto South of Heaven Ltd Blades of Grass 7	Posted - 2017.04.28 14:02:12 - [396] - Quote Hello. Thank you so much for maintaining this amazing tool. I don't know if the EVE Community could function without it. My installation seems to have encountered some problem. My "All 5" clone doesn't have all 5's. It's missing advanced weapon upgrades completely, and weapon upgrades is capped at 4. All of the buttons to edit or fix it are disabled. Can anything be done short of making my own "All 5 Copy"?
Sable Blitzmann Sebiestor Tribe Minmatar Republic 249	Posted - 2017.04.28 17:01:56 - [397] - Quote Valence Benedetto wrote: Hello. Thank you so much for maintaining this amazing tool. I don't know if the EVE Community could function without it. My installation seems to have encountered some problem. My "All 5" clone doesn't have all 5's. It's missing advanced weapon upgrades completely, and weapon upgrades is capped at 4. All of the buttons to edit or fix it are disabled. Can anything be done short of making my own "All 5 Copy"? Can you send me your saveddata.db file to [email protected]. It can be found in %userprofile%\.pyfa\. I'd like to take a look at it. There has been in the past bugs that allowed modification of All 5 and All 0 characters, so it may be an extension of those bugs. Additionally, I don't think we validate those character, although we should. I can look more into this this weekend. :) Soel Reit, thanks for the question. I'll have to get back to you about it when I'm at home and have some time to look at it. :)
K950 EVE University Ivy League 3	Posted - 2017.04.29 00:56:10 - [398] - Quote I have noticed this problem before but with the recent version it seems to persist. Adding [size] Inverted Signal Field Projector to a ship's rigs does affect the reported value in the Remote Sensor Dampener. However, the increased strength of the dampeners is not calculated when projecting the ship's dampeners on something else. For instance: [Maulus, Maulus - No Tank MWD 3 Damps Standard] Nanofiber Internal Structure II Capacitor Power Relay II Signal Amplifier II 5MN Cold-Gas Enduring Microwarpdrive Remote Sensor Dampener II, Targeting Range Dampening Script Remote Sensor Dampener II, Targeting Range Dampening Script Remote Sensor Dampener II, Targeting Range Dampening Script 200mm AutoCannon II, Republic Fleet Phased Plasma S 200mm AutoCannon II, Republic Fleet Phased Plasma S Small Particle Dispersion Projector I Small Particle Dispersion Projector I Small Inverted Signal Field Projector I Acolyte II x4 With all V skills, the damps with and without the Inverted rig are 52.6 versus 55.2 strength. But if you project that fit onto another ship, and enable/disable the Inverted rig (to see how much the affected target's targeting range changes as a function of the rig), nothing changes. Also when can I have values reported for modules (CCC rigs, batteries, CPRs, CFCs, CRs....) for how much positive value they contribute to the cap recharge rate...you have it for cap boosters and NOSs, but not other modules XD I love the notes function. I make rabid use of it. :)
Sable Blitzmann Sebiestor Tribe Minmatar Republic 250	Posted - 2017.04.30 05:51:03 - [399] - Quote Soel Reit wrote: Quote: [Loki] Syndicate Damage Control Nanofiber Internal Structure II Nanofiber Internal Structure II Nanofiber Internal Structure II /OFFLINE Overdrive Injector System II /OFFLINE Gistum A-Type 50MN Microwarpdrive Thukker Large Shield Extender Thukker Large Shield Extender Pithum A-Type Adaptive Invulnerability Field Pithum A-Type Adaptive Invulnerability Field Entosis Link II [Empty High slot] [Empty High slot] [Empty High slot] [Empty High slot] [Empty High slot] Medium Core Defense Field Extender II Medium Core Defense Field Extender II Medium Core Defense Field Extender II Loki Defensive - Adaptive Shielding Loki Electronics - Immobility Drivers Loki Engineering - Capacitor Regeneration Matrix Loki Offensive - Turret Concurrence Registry Loki Propulsion - Chassis Optimization bugging out with max speed capped at 4k m/s???? with snakes and links and quafe speed don't increase putting online the 2 mods OFFLINE is this only my problem? Took a look tonight, this is due to the Entosis Link II setting a speed limit on the ship. You can see this in the attributes of that module. Hope this solves the mystery! :)
Tza Omi Viziam Amarr Empire 1	Posted - 2017.05.02 18:52:25 - [400] - Quote I've found a possible bug in pyfa or maybe a game change I am ignorant of. I have a Kestrll fit that requires 59.4 pwr grid. I can fit it with 1 small ancillary current router I in EFT and all skills at V. In Pyfa the ship has the same base 45 pwr grid. the rig raises that by 10% but skills do not affect it. In EFT the grid is raised by 11.25 to 56.25 by setting the skills to all V. Adding the rig raises it 5.63 to 61.88 which makes my fit work. Is this a pyfa bug or has there been a game change that skills no longer affect pwr grid?

Ebag Trescientas Center for Advanced Studies Gallente Federation 37	Posted - 2017.05.02 19:01:25 - [401] - Quote Tza Omi wrote: I've found a possible bug in pyfa or maybe a game change I am ignorant of. I have a Kestrll fit that requires 59.4 pwr grid. I can fit it with 1 small ancillary current router I in EFT and all skills at V. In Pyfa the ship has the same base 45 pwr grid. the rig raises that by 10% but skills do not affect it. In EFT the grid is raised by 11.25 to 56.25 by setting the skills to all V. Adding the rig raises it 5.63 to 61.88 which makes my fit work. Is this a pyfa bug or has there been a game change that skills no longer affect pwr grid? Can you post the EFT fits? Want Pyfa, but with more features? http://pyfa.fit
Tza Omi Viziam Amarr Empire 1	Posted - 2017.05.02 19:15:45 - [402] - Quote For some reason it atarted working, I just lokked through the charater editor to make sure they were all set to 5's which they were. when I closed the editor everything looked right
Tza Omi Viziam Amarr Empire 1	Posted - 2017.05.02 19:29:32 - [403] - Quote [Kestrel, aab] 400mm Rolled Tungsten Compact Plates Small Ancillary Armor Repairer, Nanite Repair Paste 1MN Y-S8 Compact Afterburner Fleeting Compact Stasis Webifier Fleeting Compact Stasis Webifier Warp Scrambler II Rocket Launcher II, Scourge Rage Rocket Rocket Launcher II, Scourge Rage Rocket Rocket Launcher II, Scourge Rage Rocket Rocket Launcher II, Scourge Rage Rocket Small Anti-Explosive Pump I Small Anti-Kinetic Pump I Small Ancillary Current Router I
Ebag Trescientas Center for Advanced Studies Gallente Federation 37	Posted - 2017.05.03 17:13:47 - [404] - Quote Sometimes, especially if you're maxing out memory/CPU, Pyfa will stop responding properly. In those cases, usually closing it out and reopening takes care of it. Sounds like that's what happened here. Want Pyfa, but with more features? http://pyfa.fit
Tetractys Falling Stars Curatores Veritatis Alliance 6	Posted - 2017.05.04 09:55:26 - [405] - Quote Hi! Guessing how to change the font globally. i found this in pygauge.py: self.font = wx.Font(fonts.NORMAL, wx.SWISS, wx.NORMAL, wx.NORMAL, False) seems you recall the default FontFamily. How to change the font globally? (don't care if the result is ugly, I'll return to the default in case). Thanks!
Ebag Trescientas Center for Advanced Studies Gallente Federation 37	Posted - 2017.05.04 14:31:39 - [406] - Quote Tetractys wrote: Hi! Guessing how to change the font globally. i found this in pygauge.py: self.font = wx.Font(fonts.NORMAL, wx.SWISS, wx.NORMAL, wx.NORMAL, False) seems you recall the default FontFamily. In short, how to change the font globally? (don't care if the result is ugly, I'll return to the default in case). Thanks! What is the goal? What are you trying to do? Want Pyfa, but with more features? http://pyfa.fit
Tetractys Falling Stars Curatores Veritatis Alliance 6	Posted - 2017.05.04 15:30:37 - [407] - Quote Ebag Trescientas wrote: Tetractys wrote: Hi! Guessing how to change the font globally. i found this in pygauge.py: self.font = wx.Font(fonts.NORMAL, wx.SWISS, wx.NORMAL, wx.NORMAL, False) seems you recall the default FontFamily. In short, how to change the font globally? (don't care if the result is ugly, I'll return to the default in case). Thanks! What is the goal? What are you trying to do? The main goal is to harmonise (on Linux) the fonts with the global interface fonts I have set (sans serif family, anyway). do you know what to modify, please?
Sable Blitzmann Sebiestor Tribe Minmatar Republic 250	Posted - 2017.05.04 16:42:59 - [408] - Quote Tetractys wrote: Ebag Trescientas wrote: Tetractys wrote: Hi! Guessing how to change the font globally. i found this in pygauge.py: self.font = wx.Font(fonts.NORMAL, wx.SWISS, wx.NORMAL, wx.NORMAL, False) seems you recall the default FontFamily. In short, how to change the font globally? (don't care if the result is ugly, I'll return to the default in case). Thanks! What is the goal? What are you trying to do? The main goal is to harmonise (on Linux) the fonts with the global interface fonts I have set (sans serif family, anyway). do you know what to modify, please? I don't know off hand how to tweak the fonts - it's not something I've had to do much before. And there isn't a way currently to set fonts globally; to do so would mean many places in the ui would have to change, and i believe each platform renders fonts differently... I can look into this and see what wx supports and how they support it. If it's as simple as choosing between serif and sans serif, might be easy enough to do. Which font are you currently using for your system?
Ebag Trescientas Center for Advanced Studies Gallente Federation 37	Posted - 2017.05.04 17:01:07 - [409] - Quote Tetractys wrote: Ebag Trescientas wrote: Tetractys wrote: Hi! Guessing how to change the font globally. i found this in pygauge.py: self.font = wx.Font(fonts.NORMAL, wx.SWISS, wx.NORMAL, wx.NORMAL, False) seems you recall the default FontFamily. In short, how to change the font globally? (don't care if the result is ugly, I'll return to the default in case). Thanks! What is the goal? What are you trying to do? The main goal is to harmonise (on Linux) the fonts with the global interface fonts I have set (sans serif family, anyway). do you know what to modify, please? I actually do..... I've already implemented a preference to set the font size for the stats pane. (There's an issue where 4k resolution gets TINY fonts, because for OSx Pyfa hard sets to small instead of normal font size.) It shouldn't be difficult to also set the font type. The hard part will be hunting down all the places that it's used. It's not a global setting per say, we'd literally have to have it set on every GUI interface, so that's dozens of changes. Not the end of the world, but a bit time consuming. You can see how I set the font size here: https://github.com/Pyfa-fit/Pyfa-fit/pull/49 Want Pyfa, but with more features? http://pyfa.fit
Ebag Trescientas Center for Advanced Studies Gallente Federation 37	Posted - 2017.05.04 21:20:13 - [410] - Quote Tetractys wrote: The main goal is to harmonise (on Linux) the fonts with the global interface fonts I have set (sans serif family, anyway). do you know what to modify, please? I'm about 50% of the way through implementing customizable fonts, sizes, style, and weight. The catch is, there's only a handful of fonts available in wxPython. 7 to be precise (and one of those is the default OS font). While you CAN do custom fonts using OS fonts, that'd completely break the portability between platforms, and a bunch of custom work would have to be done for each OS. Difficult, to say the least. Out of the 7 fonts there's not much variance in them, the differences is very slight. There are a few that are noticeably different (teltype, for example, which looks like an old console font), but at least under Windows I doubt most people would notice the difference. I can pretty much guarantee you that you won't be able to get exactly the same font. One of the built in options MIGHT get you closer though. As for changing it, you'd have to do a lot of custom coding, it's not a quick and easy thing. Want Pyfa, but with more features? http://pyfa.fit

Sable Blitzmann Sebiestor Tribe Minmatar Republic 250	Posted - 2017.05.10 01:49:17 - [411] - Quote Greetings all! v1.29.0 is out with the new Blood Raider capitals and CONCORD ships, along with many other changes and fixes! I should note that this release contains a new error handler which will notify the user whenever something breaks. It used to be that a lot of things broke silently and we didn't know about it, but now it's more in your face. I expect a few folks will run into this - please report any breakage either here or on the GitHub issues page. https://github.com/pyfa-org/Pyfa/releases/tag/v1.29.0 As always, thanks for the feature requests, bug reports, and support. :D
BSTheo Aldent Dreddit Test Alliance Please Ignore 5	Posted - 2017.05.10 05:19:38 - [412] - Quote Hello, I was trying to delete a fit and I received this error report. It keeps popping up repeatedly, for a total of 6-8 times. Same report. I am getting the same report for any fit I try to delete. The only way to stop the error report popup is to shutdown pyfa. But it does delete the fit when I restart. But I really like pyfa! Keep up the good work! OS version: Windows-8-6.2.9200 Python: 2.7.10 wxPython: 3.0.2.0 SQLAlchemy: 1.0.5 Logbook: 1.0.0 pyfa version: 1.29.0 Stable - YC119.5 1.0 pyfa root: C:\Program Files (x86)\pyfa save path: C:\Users\Ted\.pyfa fs encoding: mbcs EXCEPTION: 'NoneType' object has no attribute 'projectedFits' File "C:\Program Files (x86)\pyfa\library.zip\gui\sfBrowserItem.py", line 318, in OnLeftUp self.Refresh() File "C:\Program Files (x86)\pyfa\library.zip\gui\shipBrowser.py", line 2006, in Refresh fit = sFit.getFit(activeFit) File "C:\Program Files (x86)\pyfa\library.zip\service\fit.py", line 253, in getFit for fitP in fit.projectedFits:
Zerb Erusius Sonnenlegion Shadow Cartel 0	Posted - 2017.05.10 08:02:21 - [413] - Quote Can confirm this, deleting a fit you have open brings up an error. Its deleting the fit but does not close the fitting tab and refresh the fitting list. OS version: Windows-7-6.1.7601-SP1 Python: 2.7.10 wxPython: 3.0.2.0 SQLAlchemy: 1.0.5 Logbook: 1.0.0 pyfa version: 1.29.0 Stable - YC119.5 1.0 fs encoding: mbcs EXCEPTION: 'NoneType' object has no attribute 'projectedFits' File "F:\pyfa\library.zip\gui\sfBrowserItem.py", line 318, in OnLeftUp self.Refresh() File "F:\pyfa\library.zip\gui\shipBrowser.py", line 2006, in Refresh fit = sFit.getFit(activeFit) File "F:\pyfa\library.zip\service\fit.py", line 253, in getFit for fitP in fit.projectedFits: And after that dont go with the mouse over the still open fitting tab, you get a ton of error popups.
Sable Blitzmann Sebiestor Tribe Minmatar Republic 252	Posted - 2017.05.10 23:09:36 - [414] - Quote Thanks for the error reports guys. The new error window is definitely having the effect we wanted. :) https://github.com/pyfa-org/Pyfa/issues/1147 That has a link to an updated build that fixes the fit delete bug, I'm currently investigating other issues that have popped up with this release before I make a determination on when to release a point release. :)
Ebag Trescientas Center for Advanced Studies Gallente Federation 37	Posted - 2017.05.10 23:11:00 - [415] - Quote Sable Blitzmann wrote: Thanks for the error reports guys. The new error window is definitely having the effect we wanted. :) https://github.com/pyfa-org/Pyfa/issues/1147 That has a link to an updated build that fixes the fit delete bug, I'm currently investigating other issues that have popped up with this release before I make a determination on when to release a point release. :) You may want to have a chat with me. Most of these issues (and a bunch that haven't been reported but will come up) have already been solved..... Want Pyfa, but with more features? http://pyfa.fit
Caitlyn Rempal Omni Galactic Central Omni Galactic Group 4	Posted - 2017.05.11 01:11:29 - [416] - Quote Been trying to delet some old characters from the character editor window -- blows up every time: OS version: Windows-7-6.1.7601-SP1 Python: 2.7.10 wxPython: 3.0.2.0 SQLAlchemy: 1.0.5 Logbook: 1.0.0 pyfa version: 1.29.0 Stable - YC119.5 1.0 pyfa root: C:\Program Files (x86)\pyfa save path: C:\Users\AnthonyFalk\.pyfa fs encoding: mbcs EXCEPTION: 'ascii' codec can't encode character u'\u03b1' in position 13: ordinal not in range(128) File "C:\Program Files (x86)\pyfa\library.zip\gui\builtinViews\entityEditor.py", line 142, in OnDelete self.entityName),
Caitlyn Rempal Omni Galactic Central Omni Galactic Group 4	Posted - 2017.05.11 01:12:23 - [417] - Quote Ebag Trescientas wrote: Sable Blitzmann wrote: Thanks for the error reports guys. The new error window is definitely having the effect we wanted. :) https://github.com/pyfa-org/Pyfa/issues/1147 That has a link to an updated build that fixes the fit delete bug, I'm currently investigating other issues that have popped up with this release before I make a determination on when to release a point release. :) You may want to have a chat with me. Most of these issues (and a bunch that haven't been reported but will come up) have already been solved..... SORRY for not scanning the last couple entries before adding this one -- off to patch!
Sable Blitzmann Sebiestor Tribe Minmatar Republic 252	Posted - 2017.05.11 02:37:38 - [418] - Quote Ebag Trescientas wrote: You may want to have a chat with me. Most of these issues (and a bunch that haven't been reported but will come up) have already been solved..... Convo'd on Slack :) Would be interested to hear what you've found out, as I'm coming up short x_x Caitlyn Rempal wrote: SORRY for not scanning the last couple entries before adding this one -- off to patch! No worries, this particular issue wasn't known about or address yet... but I have https://github.com/pyfa-org/Pyfa/issues/1152 Hi there! There's a build that includes a fix here: https://ci.appveyor.com/project/blitzmann/pyfa/build/master-35/artifacts
Sable Blitzmann Sebiestor Tribe Minmatar Republic 252	Posted - 2017.05.11 05:21:30 - [419] - Quote Just FYI, I think I've fixed the major issues surrounding bugs that were introduced with 1.29.0. I hope to have a point release out tomorrow that includes these fixes, unless some other largish problem needs to be addressed between now and then. Hang tight everyone :)
Lyta Alexander Valor Evolved Order of Allied Knights 0	Posted - 2017.05.11 10:13:08 - [420] - Quote Heya ty for your awesome program but I have found a issue! When doing a fit i activated mining drones and then tried to put it back to combat drones again and it came up with an error box. I then couldnt switch back to combat drones at all. I worked out it was dropbox - as you can see below I am using the portable switch on W10 & I get I/O errors which caused the problem. Soon as I turned dropbox off it worked fine - I guess installing pyfa onto dropbox isnt supported ? I really thought having two windows 10 installs and setting pyfa up on dropbox would work :( Is there any way I could get this working? The aim would be to have 1x Pyfa database on the dropbox so I can use it on both my Eve machines? Maybe regular non-portable install and then is there a way to move the database ? OS version: Windows-8-6.2.9200 Python: 2.7.10 wxPython: 3.0.2.0 SQLAlchemy: 1.0.5 Logbook: 1.0.0 pyfa version: 1.29.0 Stable - YC119.5 1.0 pyfa root: C:\Users\IT\Dropbox\INST\PyfaMay2017 save path: C:\Users\IT\Dropbox\INST\PyfaMay2017\saveddata fs encoding: mbcs EXCEPTION: (sqlite3.OperationalError) disk I/O error File "C:\Users\IT\Dropbox\INST\PyfaMay2017\library.zip\gui\droneView.py", line 238, in click sFit.toggleDrone(fitID, self.original.index(drone)) File "C:\Users\IT\Dropbox\INST\PyfaMay2017\library.zip\service\fit.py", line 880, in toggleDrone eos.db.commit() File "C:\Users\IT\Dropbox\INST\PyfaMay2017\library.zip\eos\db\saveddata\queries.py", line 542, in commit saveddata_session.commit() File "C:\python-2.7.10\lib\site-packages\sqlalchemy\orm\session.py", line 790, in commit File "C:\python-2.7.10\lib\site-packages\sqlalchemy\orm\session.py", line 396, in commit File "C:\python-2.7.10\lib\site-packages\sqlalchemy\engine\base.py", line 1570, in commit File "C:\python-2.7.10\lib\site-packages\sqlalchemy\engine\base.py", line 1601, in _do_commit File "C:\python-2.7.10\lib\site-packages\sqlalchemy\engine\base.py", line 690, in _commit_impl File "C:\python-2.7.10\lib\site-packages\sqlalchemy\engine\base.py", line 1341, in _handle_dbapi_exception File "C:\python-2.7.10\lib\site-packages\sqlalchemy\util\compat.py", line 199, in raise_from_cause File "C:\python-2.7.10\lib\site-packages\sqlalchemy\engine\base.py", line 688, in _commit_impl File "C:\python-2.7.10\lib\site-packages\sqlalchemy\engine\default.py", line 423, in do_commit Lyta \| Twitter \| Alliance Forum \| Twitch Stream \|



Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 [14] 15 16 17 18 .. 18 :: one page
First page \| Previous page \| Next page \| Last page

COPYRIGHT NOTICE
EVE Online, the EVE logo, EVE and all associated logos and designs are the intellectual property of CCP hf. All artwork, screenshots, characters, vehicles, storylines, world facts or other recognizable features of the intellectual property relating to these trademarks are likewise the intellectual property of CCP hf. EVE Online and the EVE logo are the registered trademarks of CCP hf. All rights are reserved worldwide. All other trademarks are the property of their respective owners. CCP hf. has granted permission to EVE-Search.com to use EVE Online and all associated logos and designs for promotional and information purposes on its website but does not endorse, and is not in any way affiliated with, EVE-Search.com. CCP is in no way responsible for the content on or functioning of this website, nor can it be liable for any damage arising from the use of this website.