Pages: 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 .. 188 :: one page |
|
Author |
Thread Statistics | Show CCP posts - 1 post(s) |
Griffin Jr
|
Posted - 2008.01.11 17:51:00 -
[1231]
i had same parsing error, but tryed it again just now and everything fine no clue wonder where problem actually was, but its working again now, at least for me
|
Gosh Krux
Minmatar Clown Punchers Syndicate
|
Posted - 2008.01.11 18:22:00 -
[1232]
Parse error here too. Started last nite, still persisiting today.
"Tragedy is when I cut my finger. Comedy is when you fall into an open sewer and die." -Mel Brooks |
Ludi Cross
|
Posted - 2008.01.11 19:06:00 -
[1233]
Edited by: Ludi Cross on 11/01/2008 19:10:31 This is an error/bug report. I looked to find a more appropriate place to put it before posting it here, and was unable to find one, so here goes:
When I attempt to import my character stats, I receive the following popup error message:
"Parsing error. Server response has been saved to: [...]\APIError.txt"
This function has been working correctly for some time; this is a change in behavior that just occurred for the first time today, using v2.4.1.
Usually a change in behavior is accompanied/caused by some other change in the environment. In my case, the only change I can identify is the training of a new skill from a skillbook, "Electronic Attack Ships", which just completed.
I, of course, have the APIError.txt in question, but hesitate to post it here (9k of plain text), but would be happy to email or upload it wherever it would be most useful.
Looking forward to your feedback.
:edit:
I don't see a method here for monitoring this thread, but I'm no expert. If you need more info, please send me an email through this board (if that's possible) or mail me ingame at Ludi Cross.
|
M'en Dharrk
Frogs of Armageddon
|
Posted - 2008.01.11 20:35:00 -
[1234]
I've got the same problem, happened after I trained Military Connections, but I don't know if that's the cause or a coincidence. Love EFT, it helps me find out if a fitting I have in mind will fit with my skills before I go around buying the modules, and gives me numbers to compare with corp-mates' setups on similar ships. Keep up the good work! :)
|
Miss Miata
|
Posted - 2008.01.11 23:02:00 -
[1235]
just a `thanks`
|
Lena Planeswalker
IDLE GUNS
|
Posted - 2008.01.11 23:09:00 -
[1236]
yup go the error too, i think something changed in the api file so eft doesnt understand it anymore, and when i tried to get my skill they were all reset to 0 so i lost my current ones
i love eft so pls fix it
|
josuaa
|
Posted - 2008.01.11 23:12:00 -
[1237]
I am getting a parsing error as well. Started last night. I just reinstalled, same result.
"Parsing error. Server response has been saved to: c:\Documents and Settings\User\Desktop\EFT\APIError.txt"
|
Rhaegor Stormborn
Volition Cult The Volition Cult
|
Posted - 2008.01.11 23:59:00 -
[1238]
Originally by: josuaa I am getting a parsing error as well. Started last night. I just reinstalled, same result.
"Parsing error. Server response has been saved to: c:\Documents and Settings\User\Desktop\EFT\APIError.txt"
Same.
Rhaegor Stormborn Fleet Admiral - The Volition Cult |
Sion Sheevok
Gallente Round Table Enterprises New Age Solutions Amalgamated
|
Posted - 2008.01.12 00:09:00 -
[1239]
Same, bloody hell, and I just sold my Domi to get a Hyp, now I can't figure out what'll work best of if I should stick to a Domi... feck...
|
Ash'el
Amarr Imperial Academy
|
Posted - 2008.01.12 00:14:00 -
[1240]
Originally by: Rhaegor Stormborn
Originally by: josuaa I am getting a parsing error as well. Started last night. I just reinstalled, same result.
"Parsing error. Server response has been saved to: c:\Documents and Settings\User\Desktop\EFT\APIError.txt"
Same.
Same thing here.
|
|
Power's Urge
Perkone
|
Posted - 2008.01.12 00:47:00 -
[1241]
We (and Gripen) have already known about that error since the previous page of this thread. It's not changing anything if each and every user of EFT posts the same thing now.
|
DutchSkeleton
|
Posted - 2008.01.12 01:41:00 -
[1242]
hehe like last 2 pages i too have same error. but i kinda think i found where the problem is. forgive me if i am wrong.
but it seems when u update via api the check found out that the implant static for example implant basic +1 is not calcuted into chr file.
So i think the problem is around implant static.
I hope this helps.
|
Idami Raptor
|
Posted - 2008.01.12 02:04:00 -
[1243]
Originally by: Power's Urge We (and Gripen) have already known about that error since the previous page of this thread. It's not changing anything if each and every user of EFT posts the same thing now.
Well given that EFT is essentially useless for its only purpose without the skills plugged in, there isn't a whole lot anyone can *do* aside from report it's not working. And they're going to do so, over and over, until it's fixed. mostly because people like to complain when their stuff doesn't work. |
Gripen
Rage and Terror Against ALL Authorities
|
Posted - 2008.01.12 02:38:00 -
[1244]
Can somebody who gets parsing error upload APIError.txt somewhere and post a link here or (if you don't want your skills\wallet balance viewed by the others) mail a link to me ingame?
Originally by: Tamia Clant By the way Gripen, EFT has incorrect attributes for capacitor flux coils. If I recall correctly, the modules remove a % of your total capacitor, and increase your recharge rate. The current EFT version has the module reduce both total capacitor and recharge rate. Basically the CAPRECHARGE value needs to be positive, not negative. The same problem seems to be present with shield flux coils, but I haven't taken the time to test it.
Maybe it was not the best way to name it but CAPRECHARGE is a capacitor recharge time and lower is better.
Originally by: Reiisha I haven't read all 41 pages, but i think the general cap recharge is too generous, unless the peak recharge suddenly became 2.5 instead of 2.4. Where did this new number come from?
Peak recharge was changed to 2.5 in the last version after series of ingame tests.
Originally by: Poco Estudiante Just downloaded the 2.41 version. I'm running vista. Copied it to my documents folder, ran it, and tried to add an account. "Unexpected failure accessing database"
What am I doing wrong?
If you get this message upon attempt of API export and exact message string was "Error: Unexpected failure accessing database" when it's something wrong on CCP's part. --- There is no Amarr problem. |
Hexman
The Ankou The Reckoning.
|
Posted - 2008.01.12 05:09:00 -
[1245]
Did u get a response for this?
Originally by: Gripen Can somebody who gets parsing error upload APIError.txt somewhere and post a link here or (if you don't want your skills\wallet balance viewed by the others) mail a link to me ingame?
|
Krystian
Caldari No Quarter. Vae Victis.
|
Posted - 2008.01.12 06:17:00 -
[1246]
Odd its working again. Server side issue? Very weird.
|
Lazuran
Gallente Time And ISK Sink Corporation
|
Posted - 2008.01.12 12:45:00 -
[1247]
In 2.4.1, the Triage Module no longer affects Capital Remote Armor Repair Systems ... (I think it did before 2.4.1). Shield Transporters get the +100%/-50% bonus properly.
Disclaimer: I do not speak for the fanbois. |
xRoma
|
Posted - 2008.01.12 15:19:00 -
[1248]
2Gripen Big Thanks, for your work! And... :) Can you add in preferences, setting for autorized proxy (login & password)?
|
DutchSkeleton
|
Posted - 2008.01.12 15:36:00 -
[1249]
Woohooo it work thx
|
Ludi Cross
|
Posted - 2008.01.12 20:37:00 -
[1250]
:Followup to error posted in detail, above:
The anomaly appears to have been in the download stream from the Eve API, as it was working again after about 4 hours after the initial report.
My recommendation for the EFT improvement list, however, would be to postpone making any change to the stored character stats until _after_ verifying receipt of a valid new package. In this case, EFT unnecessarily reset all stored stats to zero as a result of the receive error, requiring restoration from backup.
See an error? OK, stop. Don't change anything. :)
Thanks.
|
|
Noden Vorpalstar
Gallente Elite Storm Enterprises
|
Posted - 2008.01.13 01:03:00 -
[1251]
I'm having some trouble getting EFT to work. When the program starts I am seeing the following pop-up message...
Invalid File Name
Clicking OK takes me into the EFT, however it is blank and looks nothing like the screen shot of the tool.
The next thing I try is using the Ship Browser. When the Ship Browser window is up it is blank with small squares to the left hand side. Clicking on any of these squares gives me another pop-up message...
Invalid index
Again clicking Ok to the message takes me to a set up screen. At the top it has Current Setup and Character both blank with a drop down menu. To the right it shows Ship Resources all at 0 (understandable because I do not have any character or ship information in here) And below is an area for Modules, and so on and so forth.
However again there is another pop-up error message...
Access violation at address 004BB22F in module 'EFT.exe'. Read of address 0000000C.
Would someone please help me with fixing the problems I am experiencing with getting the EFT tool to function correctly?
|
Zhoul
|
Posted - 2008.01.13 02:48:00 -
[1252]
Originally by: Noden Vorpalstar I'm having some trouble getting EFT to work. When the program starts I am seeing the following pop-up message...
Invalid File Name
Clicking OK takes me into the EFT, however it is blank and looks nothing like the screen shot of the tool.
The next thing I try is using the Ship Browser. When the Ship Browser window is up it is blank with small squares to the left hand side. Clicking on any of these squares gives me another pop-up message...
Invalid index
Again clicking Ok to the message takes me to a set up screen. At the top it has Current Setup and Character both blank with a drop down menu. To the right it shows Ship Resources all at 0 (understandable because I do not have any character or ship information in here) And below is an area for Modules, and so on and so forth.
However again there is another pop-up error message...
Access violation at address 004BB22F in module 'EFT.exe'. Read of address 0000000C.
Would someone please help me with fixing the problems I am experiencing with getting the EFT tool to function correctly?
Anyone having this issue has not extracted the entire .zip file. What they are doing is opening the EXE directly from the zip file. All the files in the zip file are required (items database, etc). I was able to reproduce this by copying my EFT folder to a new folder, then deleting all the files in the new folder except for EFT.exe. I then ran EFT.exe and got the same errors.
The wrong way: - Download zip file - Open zip file - Double-click EFT.exe
The right way: - Download the zip file - Extract the zip file (entire contents) to any location (you can do this by right-clicking the zip file. If you have winzip, there will be a sub-menu). - Run EFT.exe
|
MenanceWhite
Amarr
|
Posted - 2008.01.13 05:58:00 -
[1253]
stealth bombers are'nt restricted to only 1 bomb launcher/ship some ship bonuses does'nt seem to apply; doomsday titan? ---
Originally by: Torfi There's alot. That can be done. With.. corpses
Originally by: Oveur
|
Griff'ster
|
Posted - 2008.01.13 20:01:00 -
[1254]
Edited by: Griff''ster on 13/01/2008 20:05:23 Edited by: Griff''ster on 13/01/2008 20:01:55 "Copy to Clipboard" doesn't seem to. Any ideas?
Well, the text seems to be copied just fine, but other than a screen shot, is there a way to export the oh-so-beautiful graphics? :)
"If you haven't measured a thing, you don't know a thing about a thing." |
Kaaii
Caldari PixelJuice Design Executive Outcomes
|
Posted - 2008.01.14 00:57:00 -
[1255]
Question..
What is my shield defense efficiency?
And how do i raise(?) it?
Is the number there the amount of damage I can sustain without...?
Otherwise, nice tool. You might want to put in a menu option to call back the modules thing that hides on the left side if you close it...took me two days to find it again, thought id broke it
thx Kaaii
According to Oveur, existing LSAA's already anchored will stay there. kieron Director of Community Relations,
|
Inquisitor Berthez
the oNe Academy
|
Posted - 2008.01.14 17:09:00 -
[1256]
bump \o/
and sticky this please . Ö Hamster Liberation Front since 2006 |
Sarmaul
Brutor tribe
|
Posted - 2008.01.15 19:03:00 -
[1257]
Bug: Triage has no effect on capital remote reps in EFT.
|
Meeshaa
|
Posted - 2008.01.16 02:09:00 -
[1258]
I have just downloaded the tool. Do i have to have the game open to use? I cant get it to see my character or skills. I am new to eve btw, 12 days i think.
Thanks in advance :)
|
Mangus Thermopyle
Caldari Provisions
|
Posted - 2008.01.16 10:07:00 -
[1259]
Awesome tool.
I think I found a bug though: the sustained defence gets lower when you use a Semiconductor Memory Cell instead of a Capacitator Control Circuit. The same with cap/second. But they should give the same result I think, they just use 2 different ways to increase it by 15%.
Or is my math off here? Is CCC really better than Semiconductor for cap recharge?
|
Krollin
Minmatar Ki Shoda
|
Posted - 2008.01.16 12:12:00 -
[1260]
Meesha,
Open EFT then select the View menu opion and select 'Character Editor'. There should be 4 icons on the right hand side of the screen, the left most icon (of a person) allows you to add your character using the API plug in.
Enjoy!
Kro
|
|
|
|
|
Pages: 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 .. 188 :: one page |
First page | Previous page | Next page | Last page |