| Pages: 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 .. 188 :: one page |
|
|
| Author |
Thread Statistics | Show CCP posts - 1 post(s) |
Evandariel
   |
Posted - 2009.12.05 05:01:00 -
[4381]
I have the 2.12.1 version. It seems that that the powergrid usage of the Anode Mega Electron Particle Cannon is listed at 1250 when it should be 2250.
Cheers
Evan
|
AFion Ruki
|
Posted - 2009.12.05 06:45:00 -
[4382]
Confirming... setups still are not being saved.
|
Zaqar
Pator Tech School
|
Posted - 2009.12.05 09:01:00 -
[4383]
 Originally by: Evandariel
I have the 2.12.1 version. It seems that that the powergrid usage of the Anode Mega Electron Particle Cannon is listed at 1250 when it should be 2250.
Cheers
Evan
T1 Neutrons use 2250, electrons use 1250.
|
Vislike
Gallente
Ore Mongers
BricK sQuAD.
|
Posted - 2009.12.05 12:45:00 -
[4384]
Infiltrator II damagemod and tracking differ from ingame, eft says dmg: 1.188 track: 0.99 ingame says: dmg: 1.38 track: 1.188. Only checked those 2 stats.
Thanks for a great program.
|
The Papaja
|
Posted - 2009.12.05 13:33:00 -
[4385]
Fantastic program, use it happily for quite a while now, except...
Like many others I wasted some hours on load-outs which weren't saved, I had like 7 at the same time open to reproduce some old fittings and none of them were saved, some I closed earlier, some I closed together with closing the program. So if that has a solution it will be very welcome to me.
Keep on doing the great job!
|
Samuel Saxton
Amarr
|
Posted - 2009.12.05 17:33:00 -
[4386]
Has anyone else noticed that according to EFT all assault frigs get a 15% increase per level of racial frig to their afterburner velocity yet ingame there is no such bonus?
|
Thenoran
Caldari
Pelican.
|
Posted - 2009.12.05 20:32:00 -
[4387]
Yeh, the 15% AB bonus on AFs is in EFT but it never made it to TQ.
Also confirming that new setups are not being saved.
------------------------
Low-sec is like sailing along the coast of Somalia...
|
Evandariel
|
Posted - 2009.12.06 02:03:00 -
[4388]
Originally by: Zaqar
Originally by: Evandariel
I have the 2.12.1 version. It seems that that the powergrid usage of the Anode Mega Electron Particle Cannon is listed at 1250 when it should be 2250.
Cheers
Evan
T1 Neutrons use 2250, electrons use 1250.
Correct! My mistake. How embarrassment...
|
kukumakaka
|
Posted - 2009.12.06 07:15:00 -
[4389]
Originally by: AFion Ruki
If your running windows, an easier way to make it work is right click the setup folder, click properties, and uncheck Read-Only.
Thanks for the advise.
However when I close EFT, the folders seem to auto reset, so I have to change properties every time. Any suggestions on that?
|
Rhen Ayase
Imperial Crusade Syndicate
|
Posted - 2009.12.06 09:44:00 -
[4390]
Suggestion:
Make a two Columns Between Optimal and Charge for SigRadius and ExplVelocity/tracking for weapons, i think thats kinda an important info, mostly for the new projectile charges.
--------------------------------------
Slave and Property of Kathryn Dougans. |
|
|
Abigail Nabal
Caldari
|
Posted - 2009.12.06 10:30:00 -
[4391]
I updated from EFT 2.10.2 to 2.12.1 and noticed a significant increase in the align time. For example, for a Rifter with no skills or modules it goes up from 3.4 sec to 4.9 sec.
Is this a EFT bug? Or did aligning got nerfed somewhere in between 2.10 and 2.12? Or am I missing anything else?
|
J'mee Leggs
|
Posted - 2009.12.06 19:01:00 -
[4392]
Quick question since ICBA to read this whole thread. How do I import my character?
|
Asuka Smith
Gallente
Noir.
|
Posted - 2009.12.06 19:39:00 -
[4393]
Originally by: Abigail Nabal
I updated from EFT 2.10.2 to 2.12.1 and noticed a significant increase in the align time. For example, for a Rifter with no skills or modules it goes up from 3.4 sec to 4.9 sec.
Is this a EFT bug? Or did aligning got nerfed somewhere in between 2.10 and 2.12? Or am I missing anything else?
I know align time did change recently when they nerfed agility on cruisers and stuff. For example the Exequror used to be super-sweet even with a plate and now it is average no matter what.
|
Trazis
Maru Ka'ge
|
Posted - 2009.12.07 00:04:00 -
[4394]
does anyone one else have an issue where you need to highlight multipule of the same modual to change the script/ammo/charge in it?
|
Morgon Borga
Caldari
Project Nemesis
|
Posted - 2009.12.07 03:36:00 -
[4395]
Confirming that setups are not being saved 
|
Neflar
|
Posted - 2009.12.07 03:42:00 -
[4396]
Also...do WH environmental effects work? Nothing changes when they are added to the fit, and I cant see a window where I can enable them (like drones for dps).
& Fits not saving for me as well...
|
Ga'len
Minmatar Ship Construction Services
Ushra'Khan
|
Posted - 2009.12.07 13:16:00 -
[4397]
Edited by: Ga''len on 07/12/2009 13:25:13
Originally by: Morgon Borga
Confirming that setups are not being saved
I don't know if this has been discussed yet, but I found that in Windows 7, you have to run EFT in Administrator mode in order to get setups to save.
I don't like running this in Admin mode as it opens your system up to become infected with some virus if the distribution becomes infected.
UPDATE:
I found a way to fix this.
1. Unzip the download of the EFT program and run the program for the first time.
2. Copy from your old EFT location your Setups and Characters folders.
3. Delete your old EFT folder, not the contents, the entire folder.
4. Copy the new EFT folder to where your old folder was located.
5. Setups are now saved without having to run in Admin mode.
|
Kaito Rei
Gallente
Kentucky Fried Capitals
|
Posted - 2009.12.07 13:41:00 -
[4398]
Originally by: Ga'len
Edited by: Ga''len on 07/12/2009 13:30:43
Originally by: Morgon Borga
Confirming that setups are not being saved
I don't know if this has been discussed yet, but I found that in Windows 7, you have to run EFT in Administrator mode in order to get setups to save.
I don't like running this in Admin mode as it opens your system up to become infected with some virus if the distribution becomes infected.
UPDATE:
I found a way to fix this.
1. Unzip the download of the EFT program and run the program for the first time.
2. Rename EFT2.12.1 to EFT.
2. Copy from your old EFT location your Setups and Characters folders.
3. Delete your old EFT folder, not the contents, the entire folder.
4. Copy the new EFT folder to where your old folder was located.
5. Setups are now saved without having to run in Admin mode.
Example:
1. Unziped EFT 2.12.1 in my downloads folder and ran.
2. Renamed EFT 2.12.1 to EFT
3. Copied my setups and characters folders from c:\Program Files\EFT into c:\downloads\EFT
4. Deleted the folder c:\Program Files\EFT.
5. Moved the EFT folder from c:\downloads to c:\Program Files.
6. EFT now saves your setups again.
It looks to be a permissions issue for some strange reason. I tried tinkering with permissions settings without any success. The above process seems to work. I hope this helps you all out.
Had the same problem under windows vista, came up with something similar, and until i restarted my computer it actually worked. but now its back to not saving my modified and/or new fittings.
vista 32 with eft v2.12.1
bugfix plz XD
_________________________________________________________
|
Zaqar
Pator Tech School
|
Posted - 2009.12.07 14:23:00 -
[4399]
Originally by: Neflar
Also...do WH environmental effects work? Nothing changes when they are added to the fit, and I cant see a window where I can enable them (like drones for dps).
They appear under Projected Effects (bottom of the window).
|
Hueijin San
Gallente
Estrale Frontiers
|
Posted - 2009.12.07 14:26:00 -
[4400]
I bet this is an issue with the folder "virtualization" that windows 7 applies so that legacy programs can write to files in system folders (ie windows puts these files somewhere else and then symlinks them into the current folder...)
I notiecd after upgrading to 2.12 I lost many recent setups but my older ones were intact.
I also had to run the app in xp sp2 compatability mode for it to even start (otherwise it threw a " is not a valid floating point error...
|
|
|
Hueijin San
Gallente
Estrale Frontiers
|
Posted - 2009.12.07 14:38:00 -
[4401]
Hotfix for vista /windows 7 owners: backup, then delete the contents in c:\users\<username>\AppData\Local\Virtualstore\Program Files\eft\ and try running the application again. I found that there are some config residues that crashes eft, but I'm not sure what these are. Try moving these files back into the normal eft folder to set your characters/saves back.
(for x64-users use "program files (x86)" instead)
|
Kendon Riddick
|
Posted - 2009.12.07 14:40:00 -
[4402]
Gripen, great tool very nice work and thank you for keeping it upto date and bug free!
Any chance the next version could have a recently used area that can be saved to like the favorates section, i always find myself using the same 50-100 modules and it would be super awsome to have access to them all and be able to save specifc sets away (like an armour tank list, shield tank missiles guns etc)
keep it up mate its definitly universally appricheated!
|
Mikael Deco
|
Posted - 2009.12.07 15:02:00 -
[4403]
EFT 2.12.1 not saving my setups and many of my setups have missing modules.
Using WinXp.
|
Lord Helghast
|
Posted - 2009.12.07 17:44:00 -
[4404]
why doesnt the eft team just work with the evehq fitting team and make 1 even more awesome tool
|
Abigail Nabal
Caldari
|
Posted - 2009.12.07 19:31:00 -
[4405]
Originally by: Asuka Smith
Originally by: Abigail Nabal
I updated from EFT 2.10.2 to 2.12.1 and noticed a significant increase in the align time. For example, for a Rifter with no skills or modules it goes up from 3.4 sec to 4.9 sec.
Is this a EFT bug? Or did aligning got nerfed somewhere in between 2.10 and 2.12? Or am I missing anything else?
I know align time did change recently when they nerfed agility on cruisers and stuff. For example the Exequror used to be super-sweet even with a plate and now it is average no matter what.
that must be it then... thanks. and damn, my frigs were so cool before that nerf... 
|
Entity
X-Factor Industries
Synthetic Existence
|
Posted - 2009.12.07 20:00:00 -
[4406]
Maybe nobody noticed before, but...
EFT DOES NOT SUPPORT FACTION FOF MISSILES?!!!111one
please fix 
_
Got Item? | EVE API? | Cache? |
Infraded
Caldari
CAD Inc.
|
Posted - 2009.12.07 22:33:00 -
[4407]
Originally by: Ga'len
Edited by: Ga''len on 07/12/2009 13:30:43
Originally by: Morgon Borga
Confirming that setups are not being saved
I don't know if this has been discussed yet, but I found that in Windows 7, you have to run EFT in Administrator mode in order to get setups to save.
I don't like running this in Admin mode as it opens your system up to become infected with some virus if the distribution becomes infected.
UPDATE:
I found a way to fix this.
1. Unzip the download of the EFT program and run the program for the first time.
2. Rename EFT2.12.1 to EFT.
2. Copy from your old EFT location your Setups and Characters folders.
3. Delete your old EFT folder, not the contents, the entire folder.
4. Copy the new EFT folder to where your old folder was located.
5. Setups are now saved without having to run in Admin mode.
Example:
1. Unziped EFT 2.12.1 in my downloads folder and ran.
2. Renamed EFT 2.12.1 to EFT
3. Copied my setups and characters folders from c:\Program Files\EFT into c:\downloads\EFT
4. Deleted the folder c:\Program Files\EFT.
5. Moved the EFT folder from c:\downloads to c:\Program Files.
6. EFT now saves your setups again.
It looks to be a permissions issue for some strange reason. I tried tinkering with permissions settings without any success. The above process seems to work. I hope this helps you all out.
The problem is you are putting EFT in Program Files. In Vista and 7 this is a protected directory and applications that are not escalated to admin can not write to it. EFT writes to it's own folder, so when it tries to save data it can not. Keep this outside of Program Files and on your desktop, My Documents, or just in the root of C: and it should be fine.
Confirming latest version works just fine on Vista & 7 when saving when in a user writable directory. |
Serj Reaper
Caldari
TEMPLAR.
Gentlemen's Club
|
Posted - 2009.12.08 05:10:00 -
[4408]
Edited by: Serj Reaper on 08/12/2009 05:10:07
I have mine in my documents on windows 7 64 bit and I still have problems with it not saving setups occasionally. I too believe the person who said it only saves the last edited setup is correct as well.
|
IntelOut
Caldari
Xenobytes
Stain Empire
|
Posted - 2009.12.08 07:57:00 -
[4409]
EFT 2.12.1 still has Amarr Navy crystals instead of Imperial Navy
With best regards,
IntelOut
___________________________
Homo homini lupus est... |
Morgon Borga
Caldari
Project Nemesis
|
Posted - 2009.12.08 09:27:00 -
[4410]
Edited by: Morgon Borga on 08/12/2009 09:28:47
I believe I have found a fix for the problem with EFT not saving setups. Upon checking the EFT configuration file, I saw that the value for the "Autosave_Interval" was set to 0. Changed this to a 1 and now EFT is saving my setups. So far, it's saved every fit that I've entered without a hiccup. Might wanna try this and see if it works for you as well.
Morgon
|
|
|
|
|
| |
|
| Pages: 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 .. 188 :: one page |
| First page | Previous page | Next page | Last page |